软x射线近贴显微技术

软x射线近贴显微技术不但可使活的生物样品成象,分辨率高于光学显微镜,而且人为的样品准备程序在该技术中都可避免。本文描述了用高功率激光打靶产生的等离子体作为软x射线源而进行的近贴显微研究,并得到了分辨率好于1μm的结果。     

First observation of yrast band in odd-odd162Lu

High spin states of the odd-odd¹⁶²Lu nucleus have been studied via¹⁴⁷Sm(¹⁹F,4nγ)¹⁶²Lu reaction at 95 MeV beam energy. Level scheme for yrast band based onπ[h_11/2 v[i_13/2] quasiparticle configuration was established up to I ^π = (23^?) for the first time. This band shows the signature inversion in energy before backbending generally appeared in this mass region. It is stressed that the signature splitting in¹⁶²Lu is larger than that in the¹⁶⁰Tm nucleus.     

CsBr高压X光研究

 采用同步辐射X光源和能散法，对CsBr粉末样品进行高压原位X光衍射实验。由金刚石对顶压砧高压装置（DAC）产生高压，用已知状态方程的Pt粉末作内标，由Pt的衍射数据确定样品压力，最高压力达64.4 GPa。实验结果表明：室温常压下原始CsBr样品是具有简单立方结构的晶体，其晶格常数α＝0.428 5 nm。高压下CsBr的结构有所变化，在51.3~58.4 GPa的压力范围内，(110)线和(211)线发生劈裂，从而形成了四方相。     

注入控制铜蒸气激光方向性时间过程测量

实验研究了注入控制对铜蒸气激光非稳腔输出光束质量的影响，从输出光发散角时间分辨过程的测量结果说明注入加速被注入腔内激光发散角的减小过程。由于被注入腔内放大自发辐射的存在，为得到较好的注入控制效果，注入光的脉宽和进入被注入腔的延时必须恰当。     

离焦散斑技术研究Kirchhoff板在动载作用期的弯曲

本文使用动态离焦散斑技术,测试板的动态弯曲获得成功。并推导了Kirchhoff板动态变形的有关分析,提出了由最大斜率确定材料常数的思想。显然,这是同离焦散斑方法所测数据直接相关的处理手法。     

Synthesis, Crystal Structure and Electrochemical Properties of a Novel Phenothiazine Derivative

A new compound 1,1‘-bis(3-pyridyl)-propylene(3,7-diformyl-N-ethylphenothiazinyl)ketone (C30H23N3O2S, Mr = 489.4) has been synthesized, and its crystal structure was determined by single-crystal X-ray diffraction method. The crystal is of orthorhombic, space group Ima2 with a = 27.491 (5), b = 11.942(2), c = 7.389(2) A, V = 2425.8(7) A^3, Z = 8, Dc =1.340 g/cm^3,μ = 0,167 mm ^1, F(000) = 1024, the final R = 0.0363 and wR = 0.0869 for 2054 unique reflections with Rint = 0.0254. The structural determination shows that the molecule assumes a butterfly configuration with nearly planar wings. In addition, the electrochemical study indicates that there is a high electronic delocalization in the molecule.     

铽－甲基吲哚乙酰丙酮三元配合物发光过程研究

测定和分析了ＲＥ．Ｌ１．Ｌ２（ＲＥ＝Ｔｂ（Ⅲ）、Ｇｄ（Ⅲ），Ｌ１＝３Ｍ（３甲基吲哚－１－乙酰基丙酮），Ｌ２＝ＴＰＰＯ、Ｐｈｅｎ、Ｄｉｐｙ）三元配合物的荧光光谱、磷光光谱、磷光寿命及变温荧光光谱等．讨论了Ｔｂ（Ⅲ）与配体之间的能级匹配和Ｌ１与Ｌ２的三重态之间传能的问题，说明了影响这些三元配合物荧光效率的主要因素及其发光过程．     

Controllable synthesis of ZnS/PMMA nanocomposite hybrids generated from functionalized ZnS quantum dots nanocrystals

We reported controllable synthesis of ZnS nanocrystal-polymer transparent hybrids by using polymethylmethacrylate (PMMA) as a polymer matrix. In a typical run, the appropriate amounts of zinc chloride (ZnCl₂) and sodium sulfide (Na₂S) in the presence of 2-mercaptoethanol (ME) as the organic ligand were well dispersed in H₂O/dimethylformamide solution without any aggregation. In addition, the Mn-doped ZnS nanocrystals (NCs) were synthesized with similar method. Then, ZnS-PMMA hybrids were obtained via free radical polymerization in situ by using ZnS NCs functionalized with methacryloxypropyltrimethoxysilane (MPS). FT-IR characterization indicates the formation of robust bonding between ZnS NCs and the organic ligand. The TEM images show that ZnS NCs are well dispersed in PMMA matrix, and particle size of as-prepared ZnS NCs is about 2.6 nm, in agreement with the computing results of Brus’s model and Debye–Scherrer formula. The photoluminescence measurements present that ZnS NCs, Mn-doped ZnS NCs, and ZnS/PMMA hybrid show good optical properties.