Synthesis and reversible hydration–dehydration system of copolymers bearing a vicinal tricarbonyl structure

Novel copolymers composed of a styrene (St) derivative bearing a vicinal tricarbonyl moiety and various vinyl monomers such as St, methyl methacrylate (MMA), and N‐vinylpyrrolidone (NVP) were synthesized by (1) radical copolymerization of a St derivative with a 1,3‐diketone structure with St, MMA, and NVP and (2) successive oxidation of the resulting copolymers with N‐bromosuccinimide in DMSO to convert their 1,3‐diketone moieties in the side chains into the corresponding vicinal tricarbonyl moieties. Their tricarbonyl moieties were readily hydrated in water‐containing acetone to generate the corresponding copolymers bearing geminal diol structures in the side chains. On the other hand, heating the resulting copolymers bearing the geminal diol structures in vacuo‐enabled successful recovery of the vicinal tricarbonyl moieties to demonstrate the reversible nature of this system. The hydration behavior in powdery state under air atmosphere saturated by water was also investigated. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Separation and purification of 99mTc from 99Mo produced by electron linear accelerator

The medical radionuclide ⁹⁹Mo was produced by the ¹⁰⁰Mo(γ,n) reaction using bremsstrahlung photons generated by an electron linear accelerator. The amount of ⁹⁹Mo produced was compared to that predicted by calculation using the particles and heavy ion transport code system. From the ⁹⁹Mo produced, highly pure ^99mTc was separated using the so-called technetium master milker, and the chemical yield of ^99mTc was 83–99 %. The installation of a new complex using this method and the electron linear accelerator with the preferable specification was suggested, and a possibility to supply the demand of ^99mTc was discussed and shown.

     

A Nonenzymatic Kinetic Resolution of (±)-trans-2-Arylcyclohexanols via Esterification Using Polymer-Supported DCC,DMAP, and 3β-Acetoxyetienic Acid

A nonenzymatic kinetic resolution of (±)-trans-2-arylcyclohexanols was carried out by esterification using polymer-supported N,N′-dicyclohexylcarbodiimide (DCC), dimethylaminopyridine (DMAP), and 3β-acetoxyetienic acid. The efficiency of the kinetic resolution was comparable to the enzymatic method when arylcyclohexanols bearing a condensed-aromatic ring were used.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communication® to view the free supplemental file.     

Enhancement of Photocatalytic Activity for Hydrogen Production by Surface Modification of Pt-TiO2 Nanoparticles with a Double Layer of Photosensitizers

To investigate the effect of the surface structure of dye-sensitized photocatalyst nanoparticles, we prepared three types of Ru^II-photosensitizer (PS)-double-layered Pt-cocatalyst-loaded TiO₂ nanoparticles with different surface structures, Zr- RuCP⁶ -Zr- RuP⁶ @N wt %Pt-TiO₂, RuCP⁶ -Zr- RuP⁶ @N wt %Pt-TiO₂, and RuCP² -Zr- RuP⁶ @N wt %Pt-TiO₂ (N=0.2, 1, and 5), and evaluated their photocatalytic H₂ evolution activity in the presence of redox-reversible iodide as the electron donor. Although the driving force of the electron injection from I⁻ to the photo-oxidized Ru^III PS is comparable, the activity increased in the following order: RuCP² -Zr- RuP⁶ @1 wt %Pt-TiO₂ < RuCP⁶ -Zr- RuP⁶ @1 wt %Pt-TiO₂ < Zr- RuCP⁶ -Zr- RuP⁶ @1 wt %Pt-TiO₂. The apparent quantum yield of Zr- RuCP⁶ -Zr- RuP⁶ @1 wt %Pt-TiO₂ in the first hour reached 1 %. Zeta-potential measurements suggest that the surface Zr⁴⁺-phosphate groups attracted I⁻ anions to the nanoparticle–solution interface. Our results indicate that the surface modification of dye-sensitized photocatalysts is a promising approach to enhance photocatalytic activity with various redox mediators.     

Synthesis of oligo(spiroketal)s by polycondensation of silyl ethers derived from naturally occurring myo‐inositol with 1,4‐cyclohexanedione

Oligo(spiroketal)s (OSKs) were synthesized from myo‐inositol, a naturally occurring cyclic compound bearing six hydroxyl groups. The successful synthesis of OSKs was achieved using silyl ethers 2 derived from 1,4‐di‐O‐alkylated myo‐inositol 1 as monomers, which underwent polycondensation with 1,4‐cyclohexanedione (CHD) at 0 °C in the presence of trimethylsilyl triflate as a catalyst. Because of the irreversible nature of the condensation reaction of silyl ethers with ketones, the resulting OSKs 7 had higher molecular weights than previously reported OSKs that were obtained by polycondensation of tetraols 1 with CHD, where backward hydrolysis of the ketal functions occurred. In addition, another series of OSKs, 8, were synthesized using silyl ethers 3 derived from 2,5‐di‐O‐alkylated myo‐inositol 6 , which are more symmetric monomers than silyl ethers 2 . Silyl ethers 3 underwent efficient polycondensation with CHD, whereas tetraol 6 did not, demonstrating that the derivation of such tetraols into the corresponding silyl ethers is a powerful strategy to access OSKs. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2407–2414     

Reversible and Stepwise Single-Crystal-to-Single-Crystal Transformation of a Platinum(II) Complex with Vapochromic Luminescence

The vapochromic single-crystal-to-single-crystal (SCSC) transformation of a highly luminescent Pt^II complex bearing an N-heterocyclic carbene [Pt(CN)₂(tBu-impy)] (tBu-impyH⁺=1-tert-butyl-3-(2-pyridyl)-1H-imidazolium) is reported. The trihydrate form of the complex, which exhibits blue ³MMLCT emission owing to weak Pt⋅⋅⋅Pt interactions, changed its luminescence color from blue to yellowish-green upon the desorption of water molecules while keeping the high emission quantum yield of more than 0.45. Variable-temperature and continuous in-situ tracking of single-crystal X-ray diffraction measurements revealed that the SCSC transformation proceeds reversibly by the release and reabsorption of water molecules, thereby changing the stacked structure slightly. As a result, the dynamics of vapor-induced SCSC transformation were elucidated: that the anhydrous form returned to the original trihydrate form in a two-step process under a water vapor atmosphere. In addition, the Pt^II complex exhibited a similar SCSC response accompanied by a luminescence color change in the presence of methanol vapor, while being inactive toward ethanol vapor.     

MAO‐free and extremely active catalytic system for ethylene tetramerization

The original Sasol catalytic system for ethylene tetramerization is composed of a Cr source, a PNP ligand, and MAO (methylaluminoxane). The use of expensive MAO in excess has been a critical concern in commercial operation. Many efforts have been made to replace MAO with non‐coordinating anions (e.g., [B(C₆F₅)₄]^?); however, most of such attempts were unsuccessful. Herein, an extremely active catalytic system that avoids the use of MAO is presented. The successive addition of two equivalent [H(OEt₂)₂]⁺[B(C₆F₅)₄]^? and one equivalent CrCl₃(THF)₃ to (acac)AlEt₂ and subsequent treatment with a PNP ligand [CH₃(CH₂)₁₆]₂C(H)N(PPh₂)₂ ( 1 ) yielded a complex presumably formulated as [ 1 ‐CrAl (acac)Cl₃(THF)]²⁺[B(C₆F₅)₄]^?₂, which exhibited high activity when combined with iBu₃Al (1120 kg/g‐Cr/h; ~4 times that of the original Sasol system composed of Cr (acac)₃, iPrN(PPh₂)₂, and MAO). Via the introduction of bulky trialkylsilyl substituents such as –SiMe₃, –Si(nBu)₃, or –SiMe₂(CH₂)₇CH₃ at the para‐position of phenyl groups in 1 (i.e., by using [CH₃(CH₂)₁₆]₂C(H)N[P(C₆H₄‐p‐SiR₃)₂]₂ instead of 1 ), the activities were dramatically improved, i.e., tripled (2960–3340 kg/g‐Cr/h; more than 10 times that of the original Sasol system). The generation of significantly less PE (<0.2 wt%) even at a high temperature is another advantage achieved by the introduction of bulky trialkylsilyl substituents. NMR studies and DFT calculations suggest that increase of the steric bulkiness on the alkyl‐N and P‐aryl moieties restrict the free rotation around (alkyl)N–P (aryl) bonds, which may cause the generation of more robust active species in higher proportion, leading to extremely high activity along with the generation of a smaller amount of PE.