Conformational peculiarities of alcohols incorporated in lyotropic and thermotropic liquid crystals

Conformational characteristics of 1-butanol incorporated not only in hexagonal and lamellar aggregates formed by a lyotropic liquid crystal composed of sodium octanoate, 1-butanol, and water but also in a thermotropic liquid crystal, 4'-methoxybenzylidene-4-n-butylaniline (MBBA), have been investigated from 2H NMR quadrupolar splittings of the perdeuterated and partially deuterated compounds. In the lyotropic phases, 1-butanol shows strong trans preferences and renders itself extended, and octanoate decreases the trans fraction toward the methyl terminal to fill the inner space of the aggregate on behalf of 1-butanol. In MBBA, 1-butanol prefers globular conformations. This tendency was also indicated from the phase behaviors of 1-butanol/MBBA and 1-decanol/MBBA systems. In the nematic field, two successive C-C bonds of 1-butanol mostly adopt g+/-g+/- conformations, which are formed in the vicinity of the headgroup of 1-decanol in the lamella of the sodium octanoate/1-decanol/water system. A large degree ofconformational freedom near the hydroxyl group of alcohols, being shown by ab initio molecular orbital calculations at the Gaussian-2 level, permits them to change conformation for each environment.     

Sulfur-bridged early-late heterobimetallics synthesized by incorporation of titanium,vanadium, and molybdenum into bis(hydrosulfido) templates of group 9 metals

Reactions of the bis(hydrosulfido) complexes [Cp*Rh(SH)(2)(PMe(3))] (1a; Cp* = eta(5)-C(5)Me(5)) with [CpTiCl(3)] (Cp = eta(5)-C(5)H(5)) and [TiCl(4)(thf)(2)] in the presence of triethylamine led to the formation of the sulfido-bridged titanium-rhodium complexes [Cp*Rh(PMe(3))(micro(2)-S)(2)TiClCp] (2a) and [Cp*Rh(PMe(3))(micro2-S)(2)TiCl(2)] (3a), respectively. Complex 3a and its iridium analogue 3b were further converted into the bis(acetylacetonato) complexes [Cp*M(PMe(3))(micro(2)-S)(2)Ti(acac)(2)] (4a, M = Rh; 4b, M = Ir) upon treatment with acetylacetone. The hydrosulfido complexes 1a and [Cp*Ir(SH)(2)(PMe(3))] (1b) also reacted with [VCl(3)(thf)(3)] and [Mo(CO)(4)(nbd)] (nbd = 2,5-norbornadiene) to afford the cationic sulfido-bridged VM2 complexes [(Cp*M(PMe(3))(micro2-S)(2))2V](+) (5a(+), M = Rh; 5b(+), M = Ir) and the hydrosulfido-bridged MoM complexes [Cp*M(PMe(3))(micro2-SH)(2)Mo(CO)(4)] (6a, M = Rh; 6b, M = Ir), respectively.     

1,4‐Addition polymerization of 1,4‐bis(4‐benzylpyridinium)butadiyne triflate in a dipolar aprotic solvent

1,4‐Bis(4‐benzylpyridinium)butadiyne triflate was aggregated in dimethylformamide and spontaneously converted into the 1,4‐addition type of polydiacetylene. The polymerization took place in a dipolar aprotic solvent with a large dielectric constant that could enhance the aggregation of the ionic diacetylene salt through the electrostatic interaction. The molecular weight of the diacetylene was leveled off after 30 h at 80 °C to reach 1.5 × 10⁴ (number‐average molecular weight) that consisted of the 1,4‐addition type of polydiacetylene similar to polydiacetylenes obtained in the conventional solid‐state polymerization. Electron spin resonance spectra revealed that diradicals were generated at the earlier state aggregation to give rise to a solution polymerization. The UV spectra also suggested the presence of the activated aggregation associated with the polymerization as well as the eximer emission spectra. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3534–3541, 2002     

Role of the special pair in the charge-separating event in photosynthesis

We synthesized special-pair/electron-acceptor systems consisting of a complementary slipped cofacial dimer of imidazolyl-substituted zinc porphyrin, bearing pyromellitdiimide as the electron acceptor. In the case of the dimer, the first and second oxidation potentials were split into a total of four peaks in the differential pulse voltammetry measurement. Furthermore, the shift values of the first oxidation potentials obtained by changing the solvent polarity for the dimer were almost half of those observed for the monomer. These results indicate that the radical cation is delocalized over the whole pi system of the dimer. Time-resolved transient absorption measurements revealed that, relative to the corresponding monomer, the dimer accelerated the charge separation rate, but decelerated the charge recombination rate. The smaller reorganization energy of the slipped cofacial dimer relative to that of the monomeric system demonstrates the significance of the special-pair arrangement for efficient charge separation in photosynthesis.     

Fluorous distannoxane-catalyzed acetylation of alcohols in heterogeneous single fluorous solvent system

Acetylation of alcohols with an equivalent amount of acetic anhydride is feasible in the presence of fluorous distannoxane catalyst in heterogeneous single fluorous system. The fluorous layer containing catalyst can be recycled and reused at least 10 times.     

Interconversion behavior of the C-H bond in the CH4+ radical cation: ab initio molecular dynamics study

Thermal motion of CH4+ is investigated by performing an ab initio molecular dynamics method with the second-order M?ller-Plesset (MP2)/6-311G** force field. In the trajectories obtained at 400 K, we have observed rapid interconversion behavior of the geometrical parameters of CH4+ with the frequency of 0.6/ps, where the C-H pair forming the small angle around 55 degrees is switched to another pair on subpicosecond time scale. The switching patterns are found to be classified into the following two types. Type 1: one C-H of the small angled C-H pair is switched to one C-H of the other C-H pair. Type 2: the small angled C-H pair is switched to the other C-H pair, which has been newly observed in the present ab initio MD calculation. The four C-H bonds of CH4+ are characterized by the long and short C-H bonds in a time region of the trajectories, and also for the time-evolution of C-H bonds such interconversion behavior is observed. The switching patterns of the geometrical parameters are compared with those in the interconversion scheme between six equivalent C2v symmetry structures of CH4+ [Paddon-Row, M. N. et al., J Am Chem Soc 1985, 107, 7696]. We have also investigated the electronic energy fluctuation due to thermal motion of CH4+. The standard deviation of total electronic energy at 400 K is evaluated to be 1.2 kcal/mol.     

ESTABLISHMENT and CHARACTERIZATION OF A MONOCLONAL ANTIBODY RECOGNIZING THE DEWAR ISOMERS OF(6–4)PHOTOPRODUCTS

Abstract— We established a monoclonal antibody(DEM–1) that recognizes UV-induced DNA damage other than cyclobutane pyrimidine dimers or(6–4)photoproducts. The binding ofDEM–1 antibody to 254 nm UV-irradiated DNA increased with subsequent exposure to UV wavelengths longer than 310 nm, whereas that of the 64M-2 antibody specific for the(6–4)photoproduct decreased with this treatment. Furthermore, the increase inDEM–1 binding was inhibited by the presence of the 64M-2 antibody during the exposure. We concluded that theDEM–1 antibody specifically recognized the Dewar photoproduct, which is the isomeric form of the(6–4)photoproduct. TheDEM–1 antibody, however, also bound to DNA irradiated with high fluences of 254 nm UV, suggesting that 254 nm UV could induce Dewar photoproducts without subsequent exposure to longer wavelengths of UV. Furthermore, an action spectral study demonstrated that 254 nm was the most efficient wavelength for Dewar photoproduct induction in the region from 254 to 365 nm, as well as cyclobutane dimers and(6–4)photoproducts, although the action spectrum values in the U V-B region were significantly higher compared with those for cyclobutane dimer and(6–4)photoproduct induction.     

POE incorporation into ionic clusters of ionomer and ion-conduction behaviors

Poly(oxyethylene) (POE) was incorporated into the ionic clusters of ionomers, ethylene and methacrylic acid (7.2% neutralized with KOH) copolymer membrane. The changes of properties were studied from SAXS, DSC, IR and ionic conductivity. The IR study suggested that the coordinated structures in ionic clusters of the membrane were destroyed by POE incorporation, and also SAXS suggested that ionic clusters were swollen by POE incorporation. The ionic conductivity, a carrier being K⁺ in this system, increases from 10^?16 S/cm to 10^?9 S/cm at 30°C by the incorporation of POE (20.5 wt%). On the other hand, a large amount of POE (63 wt%) could be incorporated into ionomer membrane by the esterification of methacrylic acid groups (93%) with POE. When LiClO₄ was added, ionic conduction occurred in the phase-separated POE domain, which had a low glass transition temperature (?55.2°C), showing an ionic conductivity 2.6 × 10^?6 S/cm at 25°C.     

Carbon dioxide fixation by microalgae photosynthesis using actual flue gas discharged from a boiler

To mitigate CO₂ discharged from thermal power plants, studies on CO₂ fixation by the photosynthesis of microalgae using actual exhaust gas have been carried out. The results are as follows.

Pre-fibrillation of pulps to manufacture cellulose nanofiber-reinforced high-density polyethylene using the dry pulp direct kneading method

The dry pulp direct kneading method is an industrially viable, low-energy process for manufacturing cellulose nanofiber (CNF)-reinforced polymer composites, where the chemically modified pulps are nanofibrillated and uniformly dispersed in the polymer matrix during melt compounding. In the present study, cellulose fibers of various sizes ranging from surface-fibrillated pulps (20 μm in width) to fine CNFs (20 nm in width) were prepared from softwood bleached kraft pulps using a refiner and a high-pressure homogenizer. These cellulose fibers were modified with alkenyl succinic anhydride and dried. The dried fibers were used as a feed material for melt compounding in the dry pulp direct kneading method to fabricate CNF-reinforced high-density polyethylene (HDPE). When surface-fibrillated pulps were employed as a feed material, the pulps were nanofibrillated and dispersed uniformly in the HDPE matrix during melt compounding. The resulting composites had much better properties—i.e., much higher tensile modulus and strength values, and much lower coefficient of thermal expansion values—than the composites produced using pulps without pre-fibrillation. However, when CNFs were used as a feed material, they were shortened and agglomerated during melt compounding, and the properties of the composites consequently deteriorated. The study concludes that surface-fibrillated pulp, which can be produced cost-effectively using a refiner on an industrial scale, is more suitable as a feed material than CNFs for melt compounding in the dry pulp direct kneading method. This finding enables the elimination of a preliminary step in the preparation of CNFs from pulps, which is a time-consuming and energy-intensive process.

Graphical abstract