空心球状C@SnO2@SnS2的制备及光催化去除Cr（Ⅵ）性能研究

将SnO2负载在碳球上通过不完全烧结的方法得到含有大量碳的空心状C@SnO2,随后加入TAA(硫代乙酰胺),利用离子交换法在水热过程中制备了具有不同硫化程度的空心结构的C@SnO2@SnS2三元复合物。利用XRD、FESEM、TEM、XPS、UV-Vis DRS、PL等测试手段对合成样品进行表征,并测试了其光催化去除Cr(VI)的性能。结果表明,C、SnO2和SnS2三者之间的协同作用以及空心结构的形貌显著增强了SnO2的光催化性能,其中CSS-2样品对Cr(VI)具有最佳的去除能力,太阳光照射120 min后对Cr(VI)的去除率高达98.8%。     

A three-step system calibration procedure with error compensation for 3D shape measurement

System calibration, which usually involves complicated and time-consuming procedures, is crucial for any three-dimensional （3D） shape measurement system based on vision. A novel improved method is proposed for accurate calibration of such a measurement system. The system accuracy is improved with considering the nonlinear measurement error created by the difference between the system model and real measurement environment. We use Levenberg-Marquardt optimization algorithm to compensate the error and get a good result. The improved method has a 50% improvement of re-projection accuracy compared with our previous method. The measurement accuracy is maintained well within 1.5% of the overall measurement depth range.     

肖特基结的制备与势垒测量

采用磁控溅射方法在Nb07％-SrTiO3基片上制作Au薄膜接触,并在氧气气氛下750℃退火30 min,在室温环境下测量电流电压和电容电压等特性曲线,观测整流特性,根据相应实验数据采用饱和电流法、电容C-2与反偏电压V成线性关系计算肖特基势垒的大小.     

Generation of 2.1 W Continuous Wave Blue Light by Intracavity Doubling of a Diode-End-Pumped Nd：YAG Laser in a 30 mm LBO

A folded four-mirror cavity with a composite Nd：YAG rod is optimized to obtain high efficient cw 473nm blue output. The laser could operate stably in the region of the thermal-lens focal length from 20mm to 70mm. LBO is used for intracavity frequency doubling of the 946nm transition of Nd：YAG and the optimum LBO length is investigated. A maximum output power of 2.1 Win the blue spectral range at 473nm is achieved with 30-mm-long LBO, corresponding to an optical conversion efficiency of 9.1%.     

由游离的三氨基胍在非水溶剂中合成TAZ

由游离的三氨基胍和叠氮酸在非水溶剂中合成三氨基胍叠氮酸盐（ Ｔ Ａ Ｚ）,其结构由元素分析、质谱（ Ｍ Ｓ）和 Ｉ Ｒ谱所证实     

青藏高原冰缘地貌的基本特征

本文根据作者和其他人多年实地考察所收集的第一手资料,全面而系统地论述了高原冰缘地貌的类型、分布和发育条件。指出像似石冰帽与石冰川、热融滑塌体、自喷性冰丘及成层岩屑等具有特殊性;划分了海洋型、亚大陆型及大陆型三种冰缘地貌类型区及其在水平空间上的演化模式;提出了不同类型区各自具有的冰缘地貌垂直带谱和同一冰缘现象的发育高度随纬度变化的“纬度坡降值”。揭示了作为高度冰缘带而存在的青藏高原区也明显地受纬度地带性控制。最后提出地球上不存在“冰缘作用上限”。但却存在着以雪线和夏季0℃等温线为中心的上、下两个冰缘带(即“准对称冰缘带”)。     

Fiber-distributed multi-channel open-path H_2S sensor based on tunable diode laser absorption spectroscopy

Tunable diode laser based gas detectors are now being used in a wide variety of applications for safety and environmental interest. A fiber-distributed multi-channel open-path H2S sensor based on tunable diode laser absorption spectroscopy (TDLAS) is developed, the laser used is a telecommunication near infrared distributed feed-back (DFB) tunable diode laser, combining with wavelength modulation spectroscopy technology, a detection limit of 20 ppm·m is demonstrated. Multi-channel detection is achieved by combining optical fiber technique. An on-board reference cell provides on-line sensor calibration and almost maintenance-free operation. The sensor is suitable for large area field H2S monitoring application.     

猝发双脉冲直线感应加速器组元研究

在原单脉冲直线感应加速器（LIA）组元的基础上，利用电缆延时和电缆反射两种方式获得了间隔500～1 000 ns的猝发双脉冲输出。在感应加速腔上进行了双脉冲实验，获得了幅度大于200 kV、前沿小于35 ns、平顶大于60 ns的双脉冲加速电压波形。两种方式中第一个脉冲的前沿和幅度都达到了原单脉冲组元的水平，表明加速腔负载的变化对波形没有明显影响，但由于电缆对波形的损耗，第二个脉冲的幅度和前沿比第一个脉冲略差。可以利用水介质传输线来代替长电缆，减小传输线的长度及其对波形的损耗。两个脉冲间的幅度差异可以通过改变长电缆的阻抗来调节。实验表明，通过这两种猝发双脉冲的产生方式并结合加速腔磁芯的改进，可简单高效地完成原单脉冲LIA的双脉冲改造。     

调谐半导体激光吸收光谱自平衡检测方法研究

可调谐半导体激光吸收光谱技术(TDLAS)是利用半导体激光器的波长调谐特性,扫描待测气体特征吸收线,从而获得待测气体的浓度信息。基于可调谐半导体激光吸收光谱的自平衡检测方法能够有效地消除激光器光强波动等共模噪声和其他同性干扰的影响。实验表明自平衡检测方法可以获得较理想的结果,检测限低于体积比1.2×10-6,与直接吸收光谱法相比降低了一个数量级。自平衡检测电路简单,自带的电子增益补偿机制能够自动进行平衡探测,该方法不用加信号调制和锁相放大器,直接探测待测气体的吸收光谱,从而降低成本,减小系统装置体积,易于集成为便携式痕量气体检测仪。