对几种常用长度测量仪器的综述

长度测量是物理测量中最基本的测量,许多物理量的测量都可以转化为长度的测量来实现,要想提高测量精确度,合理安排测量,掌握并运用误差分析的方法是必不可少的.一、长度测量的一般公式 长度测量仪器的结构各有不同,但基本测量方法都是把被测量与标准刻线尺进行比较.如图1所示,直线 CC'为长度标准尺的标准刻线,三角形ABC、A'B'C'为两量爪,可沿CC'移动,Lx为被测直线,当两个量爪的工作面AB、A'B'间存在夹角θ时,其中L0为测量读数值,δ=S·θ为系统误差项. 为消除上述误差、阿贝于1890年提出了著名的阿贝原则,其要点是:进行长度测量时,要…     

Magnetic and Transport Properties of Ferromagnetic Semiconductor GaDyN Thin Film

Magnetic properties and temperature dependence of electrical transport properties of rare-earth-metal Dy-doped GaN thin film are experimentally studied with a superconducting quantum interference device magnetometer and van der Pauw method. It was found that this thin nitride film has both semiconductor properties and ferromagnetism from 1OK to room temperature. The dopant-band (conducting band due to doping) electron conduction dominates the transport properties of this film at low temperatures. These results indicate that Dy-doped GaN is an n-type ferromagnetic semiconductor at room temperature.     

Experimental Study of Effect of Medium Boundary on Light Distribution in Tissue Phantoms

An experimental method for investigating the effect of medium boundary on distributions of light in the biological tissue phantom intralipid is presented. Measurements of distributions of light in intralipid-10% suspensions at 633 nm are described, in which a narrow collimated beam is incident on the surface of the phantoms and into the different depths inside of the phantoms. The experimental results show that the effect of the boundary of the medium on the curves geometry of light distributions is trivial, but the effect on intensity of scattering light is obvious, the maximal relative change of the energy fluence reaches 53.8% and the position of the peak of the energy fluence curve has a shift of 1.1 mm in the reverse direction of incident light for the phantom with albedo a=0.998, and the effect of the boundary is decreased with the increase of the absorption coefficients of tissue phantoms. The experimental results were analysed by the diffusion theory. These studies will be helpful for further understandings of the relation between the boundary of biological tissue and the distribution of light in tissue.     

注浆覆岩离层力学机理及其离层发育分类研究

依据覆岩离层生成的力学机理,结合煤层开采程度的不同,将可注浆层位的离层划分为三类.以岩石的应变为指标,确立了覆岩离层可注浆层位岩梁的断裂步距表达式,理论上证明了划分注浆层位的合理性.根据岩石的全应力应变试验,结合现场实际观测数据,对以应变为指标的岩梁断裂步距表达式做了初步验证.结果表明:可注浆层位的分类和断裂步距表达式的确定对注浆减沉工程具有指导意义.     

具P-Laplacian算子型周期边值问题解的存在性

本文利用拓扑度理论和一些分析技巧讨论了具p—Laplacian算子型周期边值问题(φp(χ’))’+d/dt gradF(χ)+gradG(χ)=e(t),χ(0)=χ(T),χ’(0)=χ’(T)解的存在性,在对阻尼项d/dtgradF(χ)没有任何限制的前提下,给出了解存在的充分条件.     

Sobolev-Hardy不等式与临界双重调和问题

该文讨论一类带有奇异系数的双重调和方程{△^2u-μu/|x|^s=f(x,u),x∈Ω,u=δu/δv=0,x∈δΩ，这里Ω包含R^N是包含0的有界光滑区域，u∈H0^2(Ω），μ∈R是参数，0≤s≤2,△^2=△△表示双重拉普拉斯算子，当f(x,u)=u^p,p=2N/N-4时，上述问题就是一个临界双重调和问题，该文运用Sobolev-Hardy不等式和变分方法，得到它的解的存在性的一些结果。     

风险中性过程的非参数估计

无套利定价理论说明，任何衍生证券定价都可以在基础资产价格(或收益)的风险中性过程基础上进行，而且方差函数的估计是估计风险中性过程的关键问题，由于方差不可观测，采用特定的参数模型将是危险的。本文主要讨论时间序列模型下条件方差函数的非参数估计，对核估计和局部多项式估计给出确定窗宽的M-图方法，并给出时间序列模型下衍生证券定价的风险中性调整方法，最后作了模拟计算。     

Improving frequency stability of laser by means of temperature-controlled Fabry-Perot cavity

The frequency stability of an all-solid-state Nd:YVO4 laser is significantly improved by means of a specially designed Fabry-Perot (F-P) interferometer used for the frequency standard in the frequency-stabilizing system. The temperature of the F-P cavity is accurately controlled by a set of thermoelectric cooler (TEC) modules attached on th ody of the cavity and the electronic feedback circuit. We find that the long-term unidirectional frequency shift of the output laser, resulting from the slow increase of the cavity length under the effect of the temperature integration on the cavity body, is essentially eliminated. The frequency stability of the output laser with the power of 530 mW is better than ±200 kHz in 1 minute and ±2.3 MHz in 40 minutes, respectively. The fluctuation of output power is smaller than ±0.5% over one hour.     

12kW二极管泵浦激光模块

二极管泵浦固体激光器（DPL）具有寿命长、热负载小、结构紧凑等优点，在工业加工、军事、通讯等领域都得到了广泛的应用。在高光束质量、高平均功率DPL激光器的研究中，目前普遍采用MOPA结构的光路布局——由谐振腔产生出低功率的单横模激光输出，经多路放大后达到满足需求的功率水平。而激光放大模块作为放大光路中的核心部件，其增益分布特性将直接影响到光束放大过程中的波前变化，因此如何在提高激光放大模块储能的同时提高模块增益分布的均匀性，从而减少光路放大过程的波前畸变，对于进一步研制高平均功率、高光束质量的半导体泵浦固体激光器具有非常重要的意义。