不同矿化剂对水热法生长的ZnO晶体发光的影响

采用水热法,以3 mol/L KOH为矿化剂,填充度35%,温度430℃,前驱物Zn(OH)2,比较研究了三种矿化剂条件下合成晶体的形貌和发光性能。三种矿化剂条件分别为样品1,3 mol/L KOH;样品2,3 mol/L KOH,1 mol/LLiOH;样品3,3 mol/L KOH,CaO∶Zn(OH)2=2%(物质的量百分比)。添加适量比例的LiOH或CaO,合成了非极性生长的ZnO晶体,晶体c轴方向生长速度明显减小,所合成的晶体大面积显露正极面c{0001},同时显露负极面-c{0001}、正锥面p{101}、负锥面-p{10}和柱面m{100}。只添加KOH或辅助添加LiOH时,合成晶体的发光光谱中只有可见光谱,无紫外线带边跃迁发光谱,说明晶体缺陷发光中心较多。添加CaO时合成晶体的发光光谱中有较强的紫外带边跃迁发光,说明晶体缺陷发光中心减少。     

矿化剂浓度对水热法合成氧化锌晶体的影响

In this paper different shapes of ZnO crystals were synthesized by hydrothermal method when different con-centrations of mineralizer were used. When KOH was less than 2mol·L^-1 and the fill factor was approximately 35% at 350℃, ZnO crystals were synthesized with size of several hundred nanometer or several micron. The shapes of crystals were hexagonal cones. When 3mol·L^-1 KOH was used as mineralize at 350℃ and the fill factor was approximately 35%, the crystals with many different sizes were synthesized, the size of maximal crystal was over 100 micron, the small-size crystals were only several micron. When mineralizer KOH was less than 1mol·L^-1 and the fill factor was approximately 35% at 430℃, ZnO crystals were synthesized with size of several hundred nanometer or several micron. The shapes of crystals were hexagonal cones. When 1.5mol·L^-1 KOH or 2mol·L^-1 KOH was used as mineralize at 430℃ and the fill factor was approximately 35%, the high quality and hexagonal prism crystals were synthesized with many different sizes, the size of maximal crystal was over 100 mi-cron, the small-size crystal was only several micron. Especially when 3mol·L^-1 KOH was used as mineralize at 430℃ and the fill factor was approximately 35%, the high quality and hexagonal prism crystals were synthesized with size of 1mm along c axis. The exposed faces were hexagonal faces m{1010}, hexagonal cone faces p{1011}, negative polar faces O{0001}. In addition, many crystals with the shape of hexagonal cone and in several micron to 50 μm of size were present. The exposed faces were hexagonal cone faces p{1011}, negative polar faces {0001}.     

Photoluminescence Mechanism of ZnO：Zn Investigated by Microwave Dielectric Spectrometry

We investigate the decay process of photoelectrons from a luminescent material of ZnO:Zn using a microwave dielectric spectrometry. Electrons in the conduction band are found to decay exponentially and the lifetime is 781 ns, while the time interval of decay from the maximum to half of this value is 470ns. ZnO:Zn is a green luminescent material at its central wavelength of 510 nm. Compared to the decay of electrons in the conduction band, the decay process of the luminescence is faster, and the time interval of decay from the maximum to half of the maximum is about 100 ns. We believe that the mechanism of the ZnO:Zn visible luminescence is recombination luminescence, and find that our theoretical simulation is in agreement with the experimental results.     

卤化银晶体中的光电子特性

本文采用微波吸收相敏检测技术,得到了卤化银微晶的自由光电子与浅束缚光电子的产生与衰减曲线,对比光电子产生量与激发光强之间的关系,验证了Gurney-Mott理论的光吸收过程,分析了不同类型卤化银材料中光电子的衰减特性,讨论了卤化银微晶中光电子行为对其感光性能的影响.     

Investigation of the photoelectron decay of silver halide microcrystal

The microwave absorption dielectric spectrum can be used to study the decay process of free photoelectrons and shallow-trapped electrons in semiconductor crystals. The decay curve of free photoelectrons and shallow-trapped electrons of silver halide grains is measured using this technique. The influence of iodide and K_4Fe(CN)_6 shallow electron trap dopants on the photoelectron lifetime of silver halide grains is studied. For the unsensitized cubic AgCl crystals, when the free photoelectron lifetime (FLT) reaches a maximum, the photographic efficiency is optimal. From our analysis, we conclude that FLT is the longest for the cubic AgCl crystals doped with 0.5% iodide at 80% doping position and 1×10^{-6} mol K_4Fe(CN)_6/molAg, whereas, for the highly photosensitized cubic AgBrCl crystals doped with K_4Fe(CN)_6, the photographic efficiency is optimal when the FLT reaches its minimum. The free photoelectron lifetime reaches minimum and the sensitivity of AgBrCl emulsion reaches maximum when the doping position is 30%Ag at K_4Fe(CN)_6 content of 10^{-6}mol/molAg.     

蒸汽处理钛酸制备锐钛矿相TiO2纳米晶体的光催化性能

采用水热法,以锐钛矿相TiO2为原料,10 mol/L NaOH溶液作为矿化剂,合成了钛酸钠纤维.用XRD和TEM对产物进行了表征,观察到纤维长度超过10 μm,宽度为10～100 nm.酸洗后对其进行二次蒸汽处理,得到了具有自组织趋势的锐钛矿相纳米TiO2晶体纤维.以1 kW紫外灯为光源,分析了合成的锐钛矿相TiO2纳米晶体的光催化降解亚甲基蓝性能及其长期稳定性.结果表明:合成的锐钛矿相TiO2纳米晶体对亚甲基蓝的光降解活性很高,纳米晶体易回收,且循环使用光催化活性没有发生衰减.     

化学气相输运法制备ZnO晶体

采用化学气相输运法在常压开放系统中,以ZnO粉体为原料,HCl和NH3为输运气体,O2和H2O为反应气体,适度过量的HCl作为刻蚀性气体,在(0001)方向的蓝宝石籽晶片上制备了(0002)方向定向生长的ZnO晶体,且a、b轴生长速度明显高于c轴方向.以(0002)方向的ZnO籽晶片作基片,制备了ZnO单晶厚膜,晶体呈螺旋状外延生长,正极面的单晶摇摆曲线半高宽为543.6弧秒.     

In掺杂对水热法合成ZnO晶体形貌的影响

本文采用水热法,在ZnO中添加In2O3为前驱物,3mol/L KOH作矿化剂,温度430℃,填充度35;,反应24h,制备了掺In的ZnO晶体.未掺杂In2O3合成的纯ZnO晶体呈六棱锥状,显露负极面-c{0001}、六棱锥面+p{1011}和-p{1011},一般不显露{0001}面.前驱物中掺杂In2O3所合成的ZnO晶体呈六角片状,直径约为5～20 μm,大面积显露{0001}面,另外还显露正锥面+p{1011}、负锥面-p{1011}和负极面-c{0001}.由此可见In掺杂可以明显的改变晶体的形态,使c轴极性快速生长趋向得到明显改善,有利于降低晶体生长缺陷.当采用ZnO晶片为籽晶时,通过水热反应在晶片上生长了一层掺In的ZnO薄膜,通过Hall参数测量得到晶体膜层的电子迁移率约为22cm2/(V·s),载流子浓度约为2×1020 cm-3,具有良好的导电性,同时也说明In可以微量掺入氧化锌晶体.     

水热合成奇异形态的ZnO晶体

本文采用水热法,以3mol/L KOH为矿化剂,填充度35;,温度430℃,在Zn(OH)2中添加SnCl2·2H2O,添加量为Sn2+:Zn2+=2;条件下,合成出ZnO晶体.产物中除了大量短六棱柱形晶体外,还出现了部分冰激凌形晶体.六棱柱形晶体具有典型的ZnO特征,显露正极面c{0001}、负极面-c{000-1}、柱面m{10-10}、正锥面p{10-11}和负锥面-p{10-1-1}.而冰激凌形晶体有明显的六棱锥晶体外壳,X光能谱(EDS)检测证实晶体各部位的组分均为ZnO.     

光电类学生教学实习基地联盟构建探索与实践

按照“ 协同共建”理念, 打破学院壁垒, 成立光电类实习基地联盟, 提出了“ 一核双翼三轨道”基地建设 思路, 整合联盟基地的优质资源, 强力打造凸显“ 光电行业” 特色的“ 实习实训平台体系” 和“ 基地双师制教师和制度 保障体系” . 基于“ 教学计划”开展常规实习, 以“ 兴趣导引”进行特色实习. 在实习链全程, 按“ 岗位”进行实习, 导师 对接, 实现“ 职业素养技能-专业动手能力-产品开发实战能力” 的分层联动, 取得了受益学生的宽广度、 实习核心 内容的纵深度和学校、 企业、 学生多方受益的综合实习效果