Design of undercuts and dipole stabilizer rods for the CPHS RFQ accelerator

As part of the design and machining of the RFQ accelerator in the Compact Pulsed Hadron Source (CPHS) project at Tsinghua University, the design process of the undercuts and dipole stabilizer rods is presented in this paper. In particular, the relationship between the inter-vane voltage slope and the local frequency of the undercut section is described quantitatively. With the identification of modes existing in the cavity, the specific parameters are optimized by the SUPERFISH and MAFIA codes. In addition, the water-cooling requirement of the dipole stabilizer rods is briefly discussed.     

Lie代数方法在线形三原子分子转动谱计算中的应用

利用动力学群U₁(4)ÄU₂(4)的对称性质以及相应的Lie代数给出了描写线形三原子分子振转谱的Hamilton量. 在考虑了振转相互作用后, 所得上述Hamilton量本征值的表达式具有在光谱分析计算中常用的项值方程的形式. 利用此表达式拟合观察线位可以得到分子的振转常数. 作为算例, 对N₂O及HCN分子(02⁰0-01¹0)ν₂红外跃迁谱带的转动能级进行了拟合分析, 所得均方根误差分别为0.00001和0.0014 cm^-1.     

Application of Lie algebraic method to the calculation of rotational spectra for linear triatomic molecules

The Hamiltonian describing rotational spectra of linear triatomic molecules has been derived by using the dynamical Lie algebra of symmetry group U1(4) U2(4). After rovibrational interactions being considered, the eigenvalue expression of the Hamiltonian has the form of term value equation commonly used in spectrum analysis. The molecular rotational constants can be obtained by using the expression and fitting it to the observed lines. As an example, the rotational levels of v2 band for transition (02°0-0110) of molecules N2O and HCN have been fitted and the fitting root-mean-square errors (RMS) are 0.00001 and 0.0014 cm-1, respectively.     

苯乙烯/N-苯基马来酰亚胺共聚物分子量测定和模型

从内聚能的角度建立了含共聚组成、序列不均匀性的共聚物分子量及分布理论,导出其计算式.将凝胶渗透色谱(GPC)与紫外吸收光谱(UV)和示差折光仪(DR)串接,测定苯乙烯(St)/N-苯基马来酰亚胺(PMI)共聚物的分子量.根据St/PMI共聚合原理,对St-PMI共聚物的分子量进行模型化,该模型能较好地预测引发剂、单体配比、转化率对共聚物分子量的影响.     

乙烯基单体-N-取代马来酰亚胺共聚物玻璃化温度研究

用差示扫描量热仪对乙烯基单体/N-取代马来酰亚胺共聚物的玻璃化温度(T_g)进行测定.研究了共聚物组成、序列结构、乙烯基单体和N-取代马来酰亚胺种类对共聚物T_g的影响.提出了含共聚物组成和序列结构的T_g预测方程,该方程不仅适合于无规共聚物,还适合于具有严重交替倾向的共聚物.     

聚丙烯酰胺-聚乙二醇-水体系相图及丙烯酰胺单体在两相中的分配

聚丙烯酰胺(PAAm)和聚乙二醇(PEG)两种水溶液混合时能形成双水相体系,其中上层为PEG富集相,下层为PAAm和PEG的混合相.用凝胶渗透色谱(GPC)法和浊度滴定法研究了PAAm-PEG-H₂O双水相体系的相图,结果表明,随着PEG分子量的升高,体系的分相浓度下降.在PAAm-PEG20000-H₂O体系中,随着体系温度升高,分相浓度先下降后升高,55℃时分相浓度最低.丙烯酰胺(AAm)单体能在两相中发生相分配,分配系数随着PAAm浓度和平衡温度的增加而增大,随着PEG浓度的增加而下降.     

小分子液滴为模板制备有机-无机杂化纳米微胶囊

通过细乳液聚合,在正辛烷液滴外包覆一层苯乙烯与甲基丙烯酸-3-三甲氧基硅丙酯(MPS)的共聚物,制备了有机-无机杂化纳米微胶囊.通过透射电镜和动态光散射粒径仪观测其形态,用红外光谱表征了其分子结构.讨论了聚合方法对微胶囊制备的影响;通过溶度参数的计算和实验验证,发现配方中单体体积分数需小于36%才能得到微胶囊;通过界面自由能模型的计算和动力学分析,说明了微胶囊形成的热力学原因;发现共聚物中MPS的加入有利于微胶囊的形成,但若MPS的含量过大将会导致胶囊塌陷;最后阐明了这种微胶囊制备过程的机理.     

Synchronization of chaotic systems based on adaptive observer design

The synchronizing problem of a chaotic system is investigated based on the observer design. The nonlinear section is assumed to satisfy the Lipschitz condition. Firstly, the normal observer is designed based on the known Lipschitz constant and the results are given in linear matrix inequality (LMI) form. Then a fairly simple adaptive observer is designed with the Lipschitz constant unknown. Simulations on synchronizing the Lorenz system are investigated and the results show the validity and feasibility of our main results.     

电弧炉电极位置控制系统的SIMULINK仿真研究

介绍了基于MATLAB5.2提供的仿真工具SIMULINK,对电弧炉电机位置控制系统进行建模、仿真和分析研究,首先得到了系统数学模型,用超前校正器（PD控制器）对该控制系统进行串联校正,然后用SIMULINK实现对该控制系统的全图形化功能模块结构图仿真计算,仿真结果表明,系统能得到更好的动态性能参数。     

非理想二元表面活性剂复配增效理论的进一步研究

在Rubingh与Rosen 提出非理想二元表面活性剂复配增效条件基础上,利用相分离模型和正规溶液理论,导出了体系降低表面张力的能力增效条件βs-βm<0,及最佳摩尔分数α1*、最低表面张力γ*cmc12和γ*cmc处对应的临界胶束浓度cmc*12.通过作三条γ～logc曲线或两条γ～logc曲线加上一个cmc值的方法,对C12NMe3Br～C12SO4Na、 C12NMe3Br～C8SO4N两种复配体系进行验证,计算结果与实验结果相符.