茶碱对聚苯胺尿酸酶电极的生物电化学活性的抑制

用聚苯胺尿酸酶电极研究了茶碱对固定酶的影响，结果表明，茶碱对固定尿酶酶有明显的抑制作用，但这种抑制作用是可逆的，在茶碱的存在下，ＰＨ对酶电极的响应电流影响与无茶碱存在时不同；在０．２－０．５Ｖ之间，酶电极的响应电流随电位加而迅速升高，当电位进一步升高时，其变化速度减慢，茶碱使尿酶酶催化反应的活化能从无抑制剂存在的时的２９．９ｋＪ．ｍｏｌ＾－１提高到４７．８ｋＪ．ｍｏｌ＾－１，即抑制剂改变了尿酸催化     

五配位Cu(Ⅰ)配合物[Cu(4′-Phtpy)(PPh_3)_2](BF_4)的合成、结构及光谱性质研究

由[Cu(MeCN)2 (PPh3)2 ](BF4 )和 4′ 苯基 2,2′:6′,2″ 三联吡啶(4′ Phtpy)在室温下反应,合成了一个新颖的具有光致发光性能的五配位配合物[Cu(4′ Phtpy)(PPh3)2 ](BF4 ).对配合物进行了X射线衍射结构表征,并进行了红外光谱、紫外可见光谱、荧光光谱等光谱学分析.晶体属单斜晶系,空间群Pn,晶胞参数:a =1 0 80 7(6)nm,b =1 0 943 (6)nm,c=2 1610(12 )nm,α =90°,β =10 2 785(10 )°,γ =90°,V =2 492(2 )nm3,Z =2,Dc=1 3 5 4g·cm-3.配合物中,Cu(Ⅰ)与 4′ Phtpy的 3个N,2个PPh3的P配位呈变形三角双锥型结构,其轴向由Cu键合联吡啶的末端 2个N所组成,赤道平面由联吡啶的中心N原子和 2个PPh3的P原子所组成     

硫化物/Ru(Ⅱ)结合物复合敏化TiO_2纳米多孔膜

用光电化学方法研究了Cds、Pbs和RuL2（NCS）2（L＝2.2′-bipydine-4.4′-dicarboxylicacid）复合敏化TiO2。纳米晶电极的光电化学行为．结果表明，采用复合敏化比用rul（Ⅱ）络合物单独敏化TiO2。纳米晶电极效果好，大大提高了光电转换效率．主要原因是采用复合敏化，可防止TiO2导带上由光注入产生的电子的反向转移，避免了电子的损失．     

1－十二烷基氮杂环庚烷－2－酮的合成

己内酰胺与溴代十二烷在氢氧化钾的作用下，于甲苯中进行Ｎ－烷基化反应，合成了１－十二烷基氮杂环庚烷－２－酮，收率８８％～９２％。     

High performance carbon-supported catalysts for fuel cells via phosphonation

Carbon-supported catalysts were phosphonated using 2-aminoethylphosphonic acid, and the resulting catalysts with largely enhanced proton conductivity performed substantially better than the untreated counterparts in proton-exchange membrane fuel cells.     

毛细管气相色谱法测定健康人外周血单个核细胞磷脂脂肪酸组成

采用毛细管气相色谱法对输注脂肪乳剂的健康志愿者外周血单个核细胞磷脂脂肪酸组成进行了分析测定 ,并将定量结果与输注脂肪乳剂前进行了比较 ,结果表明 :与输注脂肪乳剂前相比 ,连续 7d外周静脉输注 2 0 %脂肪乳剂 (2 5 0mL d) ,外周血单个核细胞数无明显变化 ;外周血单个核细胞磷脂酰乙醇胺中棕榈酸(P <0 .0 5 )和油酸 (P <0 .0 1 )明显增加 ,硬脂酸下降 ;磷脂酰胆碱中棕榈油酸 (P <0 .0 5 )和亚麻酸 (P <0 .0 5 )明显增加 ,而两种磷脂中花生四烯酸及其它多不饱和脂肪酸、饱和脂肪酸与不饱和脂肪酸的比值以及脂肪酸的不饱和指数均未发生明显变化。     

Determination of trace amounts of silver with a chemically modified carbon paste electrode

A method for the determination of trace amounts of silver with a chemically modified carbon paste electrode is described. The modified electrode is prepared by simply mixing a chelating resin (a polythioether backbone and dioxymonosulphur polyethylene polyimines in the side-chain polymer) with graphite powder and Nujol oil. By immersing the electrode in a silver sample solution (pH = 6.5–7.5), silver can be adsorbed on the electrode surface and then determined by voltammetry in a separate blank solution. The response depends on the concentration of silver and the preconcentration time. For a preconcentration time of 5 min, the detection limit is about 3 × 10^?10 M and the linear range is from 5 × 10^?10 to 1 × 10^?7 M with a relative standard deviation of 4%. Many common metal ions have no or little effect on the determination of silver. The recommended procedure was applied to the determination of trace amounts of silver in waste water.     

A facile synthesis of 2-substituted-2,3-dihydro-4(1H)-quinazolinones in 2,2,2-trifluoroethanol

2-Substituted-2,3-dihydro-4(1H)-quinazolinones were obtained in high yields by condensation of anthranilamide with aryl, alkyl or heteroaryl aldehydes or ketones in the refluxing 2,2,2-trifluoroethanol without any catalyst.     

Aromatic H／D Exchange Reaction Catalyzed by Groups 5 and 6 Metal Chlorides

Groups 5 and 6 metal chlorides such as MoCl5, WCI6, NbCl5 and TaCl5 were found to be simple and very efficientcatalysts for the aromatic H/D exchange reactions. Compared with other metal chlorides such as ZnCl2, SnCl4 and TiCl4, groups 5 and 6 metal chlorides showed better catalytic activity in the H/D exchange reaction of naphthalene with C6D6. Deuteration of anthracene using MoC15 as a catalyst proceeded within 24 h at room temperature. Other aromatic compounds such as toluene, diphenylmethane and 1,1,2-triphenylethane were also deuterated smoothly in C6D6 within 24 h at room temperature.     

System-oriented dispersion models of general-shaped electrophoresis microchannels

This paper presents a system-oriented model for analyzing the dispersion of electrophoretic transport of charged analyte molecules in a general-shaped microchannel, which is represented as a system of serially connected elemental channels of simple geometry. Parameterized analytical models that hold for analyte bands of virtually arbitrary initial shape are derived to describe analyte dispersion, including both the skew and broadening of the band, in elemental channels. These models are then integrated to describe dispersion in the general-shaped channel using appropriate parameters to represent interfaces of adjacent elements. This lumped-parameter system model offers orders-of-magnitude improvement in computational efficiency over full numerical simulations, and is verified by results from experiments and numerical simulations. The model is used to perform a systematic parametric study of serpentine channels consisting of a pair of complementary turn microchannels, and the results indicate that dispersion in a particular turn can contribute to either an increase or decrease of the overall band broadening. The efficiency and accuracy of the system model is further demonstrated by its application to general-shaped channels that occur in practice, including a serpentine channel with multiple complementary turns and a multi-turn spiral-shaped channel. The results indicate that our model is an accurate and efficient simulation tool useful for designing optimal electrophoretic separation microchips.