新型无毒离子液体催化“一锅煮”合成3,4-二氢嘧啶-2(1H)-酮

利用新型无毒离子液体(BMImSac)作催化剂, 芳香醛、1, 3-二羰基化合物和尿素或硫脲三组分“一锅煮”合成了3,4-二氢嘧啶-2(1H)-酮. 与传统方法相比, 该法是一种操作简单、产率高、用时少的环境友好方法.     

一维链状1,8-萘二酸四核锌配位聚合物[Zn4(1,8-nap)4(4,4''-bipy)2·0.5en·H2O]n的合成、结构、热稳定性及发光性质

羧酸配位聚合物是金属离子与有机羧酸构造块通过配位键或其他分子间弱作用力经自组装而成的一维、二维、三维的聚合物.由于这些配位聚合物具有新颖的拓扑结构以及在功能材料方面的潜在应用,同时又由于羧酸配合物比较稳定,所以设计和调控特殊配位聚合物成了当前的研究热点[1～4].     

双嵌段共聚物薄膜介观结构的耗散粒子动力学模拟

采用耗散粒子动力学(Dissipative Particle Dynamics, DPD)方法模拟两平行平板间的双嵌段共聚物体系的介观结构. 模拟结果表明, 随板间距的增大, 体系分层数量的增加是不连续的, 在分层数量的增加过程中, 出现不规则结构的过渡区；聚合物链末端距随板间距的增大呈周期性振荡, 振荡幅度逐渐减小. 对模拟结果的分析表明：层状结构转变点与分层数量之间存在近似线性关系；层状结构转变点近似与共聚物链长的2/3次方成正比.     

刺乌头碱的提取与其氢溴酸盐的合成及表征

刺乌头碱;刺乌头碱氢溴酸盐;合成;提取;表征     

凝胶渗透色谱法测定聚丙烯腈共聚物分子量中宽分布校正法的应用

应用宽分布校正法对凝胶渗透色谱(GPC)进行了校正，将校正曲线用于聚丙烯腈(PAN)共聚物分子量的计算。对扣除色谱峰扩展效应前后的测试结果与乌氏粘度法测得的数据进行比较。结果表明，应用宽分布校正法时，必须扣除色谱峰扩展效应，才能得到较为准确的测试结果。     

石墨烯负载高活性Pd催化剂对乙醇的电催化氧化

以石墨粉为原料, 采用Hummers法液相氧化合成了氧化石墨(GO), 然后用化学一步还原制得石墨烯负载钯催化剂. X射线衍射(XRD)、透射电镜(TEM)表征表明, Pd在石墨烯载体上有较好的分散度, 粒径为3-5 nm. 电化学活性面积(EASA)、循环伏安(CV)、计时电流(CA)和计时电位(CP)等电化学测试表明, 与传统Pd/Vulcan XC-72相比, Pd/石墨烯催化剂对碱性介质中乙醇电催化氧化的催化活性有了很大的提高.     

Synthesis and mesomorphic properties of n-butyl-4- [4-((4-n-alkoxyl-tetrafluorophenyl)ethynyl)benzyloxy]benzoates

A homologous series of n-butyl-4-[4-((4-n-alkoxyl-tetrafluorophenyl)ethynyl)benzyloxy]benzoates have been synthesized.Their phase transition temperatures have also measured by polarizing textural observation and confirmed by DSC.     

Studies on the Molecular Chain Conformation Stability of Aminated Konjac Glucomannan

Konjac glucomannan （KGM） was aminated by 2-chloroethyl-amine （CEA） as reagent so as to study the influence of concentration of CEA （based on the amount of KGM）, concentration of NaOH, reaction time and temperature on the extent of amination. And the molecular simulation technology was adopted to analyze the conformation stability of aminate （AKGM）. The results indicate that when the amount of CEA is higher, the extent of amination is higher. The optimum concentration of NaOH, reaction time and temperature are 10% NaOH, 70 ℃ and 45 rain, respectively. IR shows KGM is successfully aminated. The conformation of AKGM is in a random clew-like shape.     

Amphiphilic Graft Copolymers of Hydroxypropyl Cellulose Backbone with Nonpolar Polyisobutylene Branches

The novel amphiphilic graft copolymers with hydrophilic hard polar hydroxypropyl cellulose(HPC) backbone and hydrophobic soft nonpolar polyisobutylene(PIB) branches have been successfully synthesized through nucleophilic substitution reaction of living PIB chains carrying oxonium ions with the-OH groups along HPC backbone. The PIB branch length in the graft copolymers could be designed by living cationic polymerization and the grafting density could be adjusted by PIB~+/-OH molar ratio. The living PIB chains carrying oxonium ion were prepared by transformation of allyl bromide end groups in the presence of AgClO_4 and silver nanoparticles(3.2±0.3 nm, 0.7 wt%-1.8 wt%)generated in situ from AgBr. The phase-separation morphology was formed in the graft copolymers due to their incompatibility between backbone and branches. The hydrophilicity on the surface of graft copolymer films could be turned to hydrophobicity by increasing grafting density or/and length of PIB branches. The soft PIB segments in graft copolymers provided an unique surface via self-assembly for anti-protein adsorption against bovine serum albumin. A small amount of Ag nanoparticles in the copolymers contributed to good antibacterial activities against Staphylococcus aureus or Escherichia coli.     

Bayesian Estimation and Statistical Analysis of Risk Measurements

The Bayesian model are established for the VaR and related risk measurements. The relationship between VaR and other risk measurements including expect shortfall, tail condition expectation and conditional value at risk are discussed. Furthermore, the Bayesian estimates and Bayesian predictors of these risk measurement are derived. Thirdly, the consistency and asymptotic normality in the exponential risk model are proved. Finally, the numerical simulation method is used to verify the convergence rate under different sample sizes.