聚醋酸乙烯酯的光引发可控合成——介绍一个高分子化学综合实验

本实验开展了醋酸乙烯酯的可逆加成-断裂链转移自由基聚合(RAFT),分别运用偶氮二异丁腈(AIBN)引发和可见光引发两种方式进行了聚合反应,运用核磁共振和凝胶色谱等多种手段对所得聚合物结构进行了表征与分析。通过比较AIBN引发与光引发所获得聚合物端基结构的异同,加深了学生对RAFT聚合方法原理的理解。同时,运用该方法实现了聚合物两端端基结构的高度功能化,深入体会聚合物合成设计概念。本综合实验教学不仅通过对比法加深了学生对实验原理和专业知识的理解,提升了学生创新研究能力,而且训练了学生的实验操作技能、大型仪器使用能力和结果分析能力,提升了综合素质。     

Tobacco protein separation by aqueous two-phase extraction

Tobacco has long been considered as a host to produce large quantity of high-valued recombinant proteins. However, dealing with large quantities of biomass is a challenge for downstream processing. Aqueous two-phase extraction (ATPE) has been widely used in purifying proteins from various sources. It is a protein-friendly process and can be scaled up easily. In this paper, ATPE was studied for its applicability to recombinant protein purification from tobacco with egg white lysozyme as the model protein. Separate experiments with poly(ethylene glycol) (PEG)-salt-tobacco extract and PEG-salt-lysozyme were carried out to determine the partition behavior of tobacco protein and lysozyme, respectively. Two-level fractional factorial designs were used to study the effects of factors such as, PEG molecular mass, PEG concentration, the concentration of phase forming salt, sodium chloride concentration and pH, on protein partitioning. The results showed that, among the studied systems, PEG-sodium sulfate system was most suitable for lysozyme purification. Detailed experiments were conducted by spiking lysozyme into the tobacco extract. The conditions with highest selectivity of lysozyme over native tobacco protein were determined using a response surface design. The purification factor was further improved by decreasing the phase ratio along the tie line corresponding to the phase compositions with the highest selectivity. Under selected conditions the lysozyme yield was predicted to be 87% with a purification factor of 4 and concentration factor of 14. From this study, ATPE was shown to be suitable for initial protein recovery and partial purification from transgenic tobacco.     

Microwave-assisted direct addition of cycloethers to alkynes

Under microwave conditions, tetrahydrofuran (THF), tetrahydropyran and 1,4-dioxane are added directly onto alkynes and generated various vinyl cycloethers.     

芳基汞化合物的性质研究——Ⅶ.邻位取代苯基氯化汞的质子分解反应

本文研究了邻位取代苯基氯化汞o-XC_6H_4HgCl(X=CH_3、H、Cl、Br、COOC_2H_5、NO_2)与HCl(NaI)在85％对氧陆圜水溶液中的质子分解反应,证明反应按S_El历程进行。视取代基不同,反应速度次序如下:CH_3>H>Cl>COOC_2H_5～Br>NO_2。从化学反应与紫外光谱的研究以及理论计算结果表明,p或π电子的邻位取代基对水原子有分子内配位,它对反应速度有重要影响。测定了15种p-、m-、o-取代苯基氯化汞在80％对氧陆圜水溶液中在40.0℃的质子分解反应的速度常数k_1,表明给电性取代基加速反应,吸电性取代基使反应减慢,这可以看作是反应中心在芳环上的芳基汞化合物的S_E1反应所具有的一个特点。     

A Two-dimensional Lanthanide Coordination Framework with a New Amide-type Tripodal Ligand, 2,2′,2＂-Nitrilotris{[（2′- benzylaminoformyl）phenoxy]ethyl}amine

The La(III) complex with a new amide‐type tripodal ligand,2,2′.2″‐nitrilotris{[(2′‐benzylaminofomyl)‐phenoxylethyl)amine (L), was synthesized and characterized by X‐ray crystallographic analysis. Crystal data: C₄₈H_55.50LaN₇O_18.75, M_r=1169.40, monoclinic. space group, P2₁/n, a= 1.0644(3) nm. b=2.3889(5) nm, c= 2.1917(5) nm, β=90.65°, V=5.573(2) nm³, Z=1, D_c=1.394 g°cm^?3, R₁=0.0487, wR [1>2s?(I)]=0.1266. The results reveal that each La(III) ion binds to 9 oxygen atoms, three of which belong to carbonyl groups from three tripodal ligands and six to three bidentate nitrate groups and a two‐dimensional sheet of 4.8² networks is assembled by metal‐ligand coordination interaction. L, a heptadentate compound, merely acts as a tridentate bridging spacer due to its steric hindrance and links the La(III) ions as three‐connected nodes.     

明胶包埋黑根霉菌丝体对水中Pb^2＋吸附性能的研究

本文研究了明胶包埋黑根霉菌丝体的包埋条件及包埋后对水中Ｐｂ~（２＋）的吸附作用。结果表明，包埋比例为６／１（Ｗ／Ｗ），交联剂甲醛用量为２５％，凝胶化温度为４０℃，ＰＨ＝１０．０为包埋反应的最佳条件。包埋后的饱和吸附量可达１２１．２ｍｇ／ｇ，比未包埋黑根霉下降１０．８％。吸附平衡时间延长至８００分钟。ｐＨ值对吸附量有较大影响，ＰＨ＝４．０时，吸附最佳。升高温度有利于吸附。流速对动态吸附有很大影响。ＨＮＯ３和ＮａＯＨ可以对吸附剂进行解吸与再生，解吸率在９４％以上。明胶包埋后黑根霉具有较好的物理性能，断裂压缩强度为１２８．１Ｎ／ｃｍ２。