Theoretical and experimental vibrational property of 1,3,4,6-tetramethylpiperazine-2,5-dione

1,3,4,6-tetramethylpiperazine-2,5-dione was synthesized, and the crystal structure was characterized by single-crystal X-ray diffraction method, vibrational spectral measurements were obtained by Fourier transform infrared spectroscopy and Fourier transform Raman spectroscopy. The measurements agree well with the calculated geometrical structure and harmonic vibrational wavenumbers (usingab initio and density functional theory Becke’s three parameters hybrid method with the Lee, Yang, and Parr non-local functions methods with 6-311G and 6-311G** basis sets).     

Preparation and adhesive properties of colored Ti/Zr-based conversion coating on aluminum foil for lithium battery packaging

In this study, an aluminum (Al) foil used for lithium ion battery packaging film was treated with titanium (Ti)/zirconium (Zr) solution containing hexafluorotitanic acid and hexafluorozirconic acid using tannic acid as a colorant and metavanadate as an accelerator, respectively, and a golden conversion coating was successfully deposited on the surface of Al foil. The morphology and composition of the coating were characterized by scanning electron microscopy, energy dispersive spectroscopy, and X-ray photoelectron spectroscopy, and the hydrophilicity was assessed by contact angle measurement. The effect of Ti/Zr treatment on the adhesion properties of Al foil was evaluated by T-peeling test and compared with that of traditional chromate-phosphate treatment. The results show that tannic acid contributes to the formation of the golden coating, and metavanadate accelerates the formation of the conversion coating. The results also indicate that the Ti/Zr-based conversion coating is mainly composed of Al₂O₃, Al (OH)₃, AlF₃, TiO₂/ZrO₂, NH₄VO₃, and V₂O₅. The Ti/Zr treatment cannot only improve the heat-sealing strength, but also the T-peeling strength by approximately 12 times compared with that of untreated Al foil. Thus, Ti/Zr treatment has the potential to replace the traditional chromate conversion treatment.     

Cr3+比色荧光探针的合成及细胞成像应用

以2,3,3-三甲基-3H-苯并[e]吲哚和对二甲氨基苯甲醛为原料, 乙醇作溶剂, 在酸性催化条件下, 通过一步反应合成了比色荧光探针B. 在EtOH/HEPES(pH=7.4)体积比为9∶1的混合体系中, 向探针B溶液中加入Cr ³⁺后, 溶液颜色由淡黄色变为紫红色, 说明探针B可以对Cr ³⁺进行裸眼识别. 紫外-可见吸收光谱和荧光发射光谱分析表明, 探针B对Cr ³⁺的选择性好、 灵敏度高且对EDTA有良好的接力识别. 探针B对Cr ³⁺的结合常数K_a=0.28×10 ² mol/L, 检出限为1.90×10 ^-8 mol/L, 该检出限低于世界卫生组织(WHO)规定的饮用水中Cr ³⁺的最大含量(9.60×10 ^-8 mol/L). 利用荧光发射光谱对实际水样中Cr ³⁺的浓度进行了定量检测. 探针B也可应用于对活细胞中Cr ³⁺的检测, 具有较好的应用前景和实用价值.     

碳纳米管薄膜的制备及其在柔性电子器件中的应用

近年来,柔性电子器件的发展日新月异。以碳纳米管为代表的碳纳米材料,尤其是其组装成的宏观结构碳纳米管薄膜具有良好的柔性和优异的导电性,且具有化学稳定、热稳定、光学透明性等优点,在柔性电子领域展现了极大的应用潜力。本文简要综述了近年来碳纳米管薄膜在柔性电子器件领域的研究进展。首先详细介绍了碳纳米管薄膜的两类主要制备方法,分别为干法制备和湿法制备;继而介绍了碳纳米管薄膜在多种柔性电子器件的组装、性能与应用方面的最新研究进展;最后总结了碳纳米管薄膜基柔性电子领域的发展现状,并讨论了该领域所面临的挑战及其未来前景。     

Handedness inversion of chiral mesoporous silica: A diffuse-reflectance circular dichroism study

Temperature-depended handedness inversion in chiral mesoporous silica was investigated by diffuse-reflectance circular dichroism spectra.     

Derived dimension via τ-tilting theory

Czechoslovak Mathematical Journal - Comparing the bounded derived categories of an algebra and of the endomorphism algebra of a given support τ-tilting module, we find a relation between the...     

A colorimetric sensing strategy based on enzyme@metal-organic framework and oxidase-like IrO2/MnO2 nanocomposite for α-glucosidase inhibitor screening

Microchimica Acta - Testing gluten content in food, before it reaches the consumer, becomes a major challenge where cross-contamination during processing and transportation is a very common...     

Flatness,plateau limit and limit length of single-plateau functions

In this paper we consider iteration of single-plateau functions, an important class of continuous functions with infinitely many forts, and investigate changes of number and length of plateaux under iteration.We use the indices flatness, plateau limit and limit length to formulate those changes. Furthermore, we compute the flatness, plateau limit and limit length for all the nine types of single-plateau functions.     

Organosulfonate Counteranions—A Trapped Coordination Polymer as a High-Output Triboelectric Nanogenerator Material for Self-Powered Anticorrosion

Selection of the friction electrode materials is crucial to the performance of a triboelectric nanogenerator (TENG). In the present study, a metal–organic coordination complex containing organosulfonate counteranions with electron-donating ability was synthesized through the coordination-driven self-assembly approach under mild reaction conditions and was chosen as a positive electrode material to construct a triboelectric nanogenerator, exhibiting high-output performance with a peak value of short circuit current density of 98.6 μA and an output voltage of 1180 V. As a practical application, it was shown to light up 1488 commercial green LEDs and power an anticorrosion system device to protect metals from corrosion.