Structural characterization of Acetobacter diazotropicus levansucrase by matrix-assisted laser desorption/ionization mass spectrometry: identification of an N-terminal blocking group and a free-thiol cysteine residue

High-resolution matrix-assisted laser desorption/ionization time-of-flight mass spectrometry was used to characterize the primary structure of the levansucrase (EC 2.4.1.10) secreted by Acetobacter diazotropicus SRT4. The technique permitted not only the reading frame of this enzyme, the amino acid sequence of which was deduced from DNA, but also the elucidation of an N-terminal blocking group and the position of a disulfide bridge between Cys309 and Cys365 among the three Cys residues. A free cysteine (Cys127) was identified by modifying an intact molecule with a sulfhydryl reagent, 5-(octyldithio)-2-nitrobenzoic acid, under non-reducing conditions. In addition, the enzyme obtained by site-directed mutagenesis at Asp279 to Asn279 was also identified by the above methods. Post-source decay analysis of the tryptic peptide containing the mutation site unequivocally revealed an Asn residue at position 279.     

A microfluidic device using a green organic light emitting diode as an integrated excitation source

A simply fabricated microfluidic device using a green organic light emitting diode (OLED) and thin film interference filter as integrated excitation source is presented and applied to fluorescence detection of proteins. A layer-by-layer compact system consisting of glass/PDMS microchip, pinhole, excitation filter and OLED is designed and equipped with a coaxial optical fiber and for fluorescence detection a 300 microm thick excitation filter is employed for eliminating nearly 80% of the unwanted light emitted by OLEDs which has overlaped with the fluorescence spectrum of the dyes. The distance between OLED illuminant and microchannels is limited to approximately 1 mm for sensitive detection. The achieved fluorescence signal of 300 microM Rhodamine 6G is about 13 times as high as that without the excitation filter and 3.5 times the result of a perpendicular detection structure. This system has been used for fluorescence detection of Rhodamine 6G, Alexa 532 and BSA conjugates in 4% linear polyacrymide (LPA) buffer (in 1 x TBE, pH 8.3) and 1.4 fmol and 35 fmol mass detection limits at 0.7 nl injection volume for Alexa and Rhodamine dye have been obtained, respectively.     

可溶性汞化苯乙烯－丙烯酸甲酯共聚物的合成

用自由基溶液降合方法制备一系列苯乙烯－丙烯酸甲酯线型共聚物，用核磁共振测定了苯基在共聚物中的百分比，在该共聚物的四氢呋喃溶液中，用三氟乙酸汞在共聚物的苯环上进行亲电取代反应，得到可溶性汞化共聚物，由于这类泵化共的可溶于四氢呋喃，二氯甲烷等溶剂，用重沉淀法多次提纯，得到了纯度很高，溶解性较好的含重金属二价汞的共聚物，用红外光谱仪测定共聚物上的汞基团，用原子吸收定量测试共聚中的汞的百分聚代率，结果表明     

Mass spectrometric analysis of low molecular mass polyesters by laser desorption/ionization on porous silicon

A low molecular mass polyester was analyzed by desorption/ionization on porous silicon (DIOS) mass spectrometry. The results were compared with those of matrix-assisted laser desorption ionization (MALDI) mass spectrometry using matrixes of alpha-cyano-4-hydroxycinnamic acid (CHCA) and 10,15,20-tetrakis(pentafluorophenyl)porphyrin (F20TPP). The CHCA matrix was not suitable for characterization of low molecular mass components of the polyester because the matrix-related ions interfered with the component ions. On the other hand, the F20TPP matrix showed no interference because no matrix-related ions appeared below m/z 822. However, the solvent selection for determining optimal conditions of sample preparation was limited, because F20TPP does not dissolve readily in any of the available organic solvents. In the DIOS spectra, the polymer ions were observed at high sensitivity without a contaminating ion. No matrix is needed for DIOS spectra of low molecular mass polyesters, facilitating sample preparation and selectivity of a precursor ion in post-source decay measurements.     

Chelatometric titration of tin in non-ferrous alloys with hedta

A new titrimetric method for determination of tin (4%) in aluminium alloys, tin- and lead-base alloys, solders, white bearing alloys, special bronzes and silver brazing alloys is proposed. HEDTA, Semi-Xylenol Orange and bismuth perchlorate are used as titrant, indicator and back-titrant respectively. Measures are taken to overcome the hydrolysis of Sn(IV). Monochloroacetic acid and ethylene glycol are added as auxiliary agents. The standard deviation of this method was found to be 0.2 mg and its coefficient of variation to vary from 0.25 to 2%, according to amount of tin. A novel method of sample decomposition and a modified method for separating Sn(IV) are also suggested.     

Bamboo-shaped Ag-doped TiO2 nanowires with heterojunctions

Bamboo-shaped Ag-doped TiO2 nanowires with heterojunctions were synthesized by a simple solvothermal method. The diameter of the nanowires was about 50-100 nm, and they had a length of up to a few millimeters. The detailed structure of the heterojunction in the nanowire was also characterized.     

Chiral tris(oxazoline)/Cu(II) catalyzed coupling of terminal alkynes and nitrones

Novel chiral iPr-tris(oxazoline)/Cu(ClO4)2 x 6H2O catalyzed coupling of terminal acetylenes and nitrones to afford cis-disubstituted beta-lactams is described; the choice of base proves essential to both the diastereoselectivity and the enantioselectivity.     

Characteristics of hyaluronate-hydroxyethyl acrylate blend gel and release of cationic amphiphilic solutes

Hyaluronate-hydroxyethyl acrylate blend gel (HA-PHEA) were prepared to modify the brittleness of hyaluronate gel (HA) and the characteristics of HA-PHEA gel were compared with those of HA and polyhydroxyethyl acrylate (PHEA) gels. These gels were high in water content and transparent. HA-PHEA gel was improved in viscoelastic properties due to the elasticity and the high affinity with water of PHEA, and the drying-swelling cycles became reversible. The effective charge densities theta of the gels estimated from membrane potentials were -0.002, -0.008 and 0 mol dm(-3) for HA-PHEA, HA and PHEA gels. Effects of electro- static and nonelectrostatic interactions on absorptions and releases were studied using sodium benzoate (NaBA) as an anionic solute, and methylene blue (MB), chlorpromazine (CPHCl) and benzethonium chloride (BZTCl) as cationic solutes, in which CPHCl and BZTCl are cationic amphiphilic solutes. The releases of MB, CPHCl and BZTCl from HA-PHEA and HA gels were suppressed comparing with those of NaBA. By adding salts, the releases of MB and CPHCl were enhanced but those of BZTCl were suppressed due to enhancement of the intra- and intermicelle formation. In the releases of the cationic solutes from HA-PHEA gel, electrostatic and nonelectrostatic interactions with HA were found to play important roles. Behaviors of the releases from HA-PHEA gel were found to possess the features of HA gel.     

Controlled growth of large-area, uniform, vertically aligned arrays of alpha-Fe2O3 nanobelts and nanowires

Vertically aligned iron oxide nanobelt and nanowire arrays have been synthesized on a large-area surface by direct thermal oxidation of iron substrates under the flow of O(2). The effects of reactive gas pressure, composition, and temperature have been systematically studied. It was found that nanobelts (width, tens of nanometers; thickness, a few nanometers) are produced in the low-temperature region (approximately 700 degrees C) whereas cylindrical nanowires tens of nanometers thick are formed at relatively higher temperatures (approximately 800 degrees C). Both nanobelts and nanowires are mostly bicrystallites with a length of tens of micrometers which grow uniquely along the [110] direction. The growth habits of the nanobelts and nanowires in the two temperature regions indicate the role of growth rate anisotropy and surface energy in dictating the ultimate nanomorphologies.     

External validation of the biodegradability prediction model CATABOL using data sets of existing and new chemicals under the Japanese Chemical Substances Control Law

External validation of the biodegradability prediction model CATABOL was conducted using test data of 338 existing chemicals and 1123 new chemicals under the Japanese Chemical Substances Control Law. CATABOL predicts that 1089 chemicals will have a BOD < 60% while 925 (85%) actually have an observed BOD<60%. The percentage of chemicals with an observed BOD value <60% tends to increase as the predicted BOD values decrease. In contrast, 340 chemicals were predicted to have a BOD > or = 60% and 234 (69%) actually had an observed BOD > or = 60%. The prediction of poor biodegradability was more accurate than the predictions of high biodegradability. The features of chemical structures affecting CATABOL predictability were also investigated.