晶种诱导Nonasil(HMI)的合成

以不同分子筛(Nonasil, MCM-22或MCM-49)为晶种, 在水热条件下以六亚甲基亚胺(HMI)为模板剂, 对纯硅沸石Nonasil(HMI)的合成进行了研究. 并且对各种合成参数, 包括晶种类型、硅源、晶化温度和Na+浓度等对Nonasil(HMI)合成的影响进行了探讨. 发现在适量的Na+存在条件下, 晶种的引入大大缩短了晶化时间; 不同类型的晶种对晶化速度有不同程度的提高. 特别是用异类晶种(如MCM-22或MCM-49)能够合成高结晶度的Nonasil(HMI).     

蝎型钒氧配合物的合成、结构及量子化学研究

设计合成了两种新型的以聚类吡唑硼酸盐为配体的钒氧配合物VO(acac)[HB(pz)3](1)和VO(acac)[HB(3,5-Me2pz)3]·CH3CN(2). 运用元素分析、 红外光谱和紫外光谱对所合成的配合物进行了表征, 并用X射线衍射测定了它们的晶体结构. 同时, 采用量子化学的Hartree Fock方法和自然轨道分析方法(NBO), 使用3-21G*(6d, 7f)基组计算得到了两个分子体系的分子轨道、原子电荷以及键级, 并对其结构进行了分析.     

功能色素材料——苯重氮氨基偶氮苯类光度显色剂的研究

功能色素材料——苯重氮氨基偶氮苯类光度显色剂的研究罗小民周伟良孙培培吴斌才（华东师范大学化学系上海２０００６２）关键词光度显色剂离解电子光谱ＨＭＯ法中图分类号６２１．１３功能色素材料包括光致变色、电致变色、热致变色和压敏变色材料以及光度显色剂等。这些...     

Total Synthesis of Several 8, 8",-Biflavones

8,8"-Biflavonoidsareantw0rtantclass0fbiflavonoids.Asasystematicresearchofthe8,8"-biflav0noids,wehavepreviouslyreportedthestudyonthereactionof2'-hydroxychaloneswithl2-H2SO4-DMSOsystem.'InthispaPer,thesynthesisof5,5",7,7',-tetTameth0xy-8,8"-biflavonela2,4,4",7,7"-tetramethoxy-8,8"-biflavone1b',4',4",,5,5,',7,7"-hexamethoxy-8,8"-biflav0ne1c4and4,4"-dibenZyl0xy-5,5",7,7"-tetramothoxy-8,8"-biflavoneldisreported.ThesyntheticmethodisshownintheSchemebelow.2-Hydroxyacet0phenonescondensedwithsubsti…     

A High Sensitivity Detection Method of Singlet Oxygen and Superoxide Anion

This paper, for the first time, reports a method that can be used as a highly sensitive probe for singlet oxygen (^1O2) and superoxide anion (O2^-) in vitro or in vivo. FCLA(3,7-dihydro-6-{4-[2-(N‘-(5-fluoresceinyl)thioureido)ethoxy]phenyl}-2-methylimidazo{1,2-a}pyrazin-3-one sodium salt), a chemiluminescence (CL) analysis reagent, has been reported to sensitively react with ^1O2 and O2^- to emit photons with a spectral peak of 525nm. In this work,when human serum albumin (HSA) was added into FCLA solution to enhance the CL intensity,approximately 20 times, compared to that without HSA. The enhanced CL had the same 525 nm spectral peak, identical to that without HSA. By gradually reducing the molecular oxygen content in the solution, we find that the auto-oxidation of oxygen molecules dissolved in the solution plays an important role in the CL process. Based on these experimental evidences, we propose a novel and highly sensitive detection method of ^1O2 and O2^- which may have a great potential in chemical and medical applications.     

金华地区饲料中铅、镉的检测

通过对金华地区多家饲料生产厂家所生产的饲料进行抽样调查,利用原子吸收分光光度计测定了饲料中铅、镉的含量。结果表明,所测饲料原料样品中,铅、镉的含量完全符合国家标准规定,合格率100%;铅、镉含量分别在0.005~0.157 mg/kg和0.06~0.104 mg/kg范围内,铅含量最高的是玉米为0.157 mg/kg,最低的是蚕豆为0.005 mg/kg;镉含量最高的是骨粉为0.104 mg/kg,最低的是豌豆和蚕豆为0.006 mg/kg。金华市饲料中铅、镉含量符合国家饲料卫生标准,可以安全喂养牲畜。     

含双二苯基膦甲烷铜(Ⅰ)配合物的研究进展

本文概述了含双二苯基膦甲烷铜(Ⅰ)配合物的化学进展,总结了配合物的合成方法:置换法、还原法、电化学方法和直接加成法,全面论述了双核、三核、多核和异核配合物的结构特征,探讨了该类配合物的重要荧光性质。     

超高交联吸附树脂对芳香有机物的吸附机理

通过3种吸附树脂AmberliteXAD-4、AM-1和JX101对芳香化合物苯胺、苯酚和苯甲酸在不同温度下的吸附特征,利用前线轨道理论进行了合理解释。结果表明,吸附剂表面进行适当的修饰,可以改变吸附剂的LUMO或HOMO,使吸附质分子与吸附剂表面的功能基产生化学作用,从而产生额外的化学吸附量,为优化设计吸附剂提供了理论指导。     

第一性原理计算钛酸铅A位掺杂对其负热膨胀性的影响

近年来,实验发现钛酸铅基材料具有负热膨胀性,且其热膨胀程度会受到掺杂元素的影响. 目前所研究的A位掺杂体系中,仅Cd原子掺杂能使钛酸铅负热膨胀性增强. 所以研究A位掺杂钛酸铅,比较Cd原子与其他原子在掺杂钛酸铅时化学键的异同,有助于深刻理解钛酸铅负热膨胀的本质. 本文利用第一性原理,分别优化了Sr、Ba、Cd掺杂钛酸铅的晶格常数,计算了它们的态密度和电荷密度. 结果表明Cd―O键的共价性强于Pb―O键,而Ba―O键和Sr―O键几乎呈离子性,Ba/Sr对Pb的替代削弱了化合物的共价性,降低了自发极化强度. 与实验测量的热膨胀系数对比可以发现,A位原子与氧原子之间的共价性增强,化合物负热膨胀程度升高;若A位原子与氧原子之间的共价性削弱,负热膨胀程度降低. 可见A位原子与氧原子之间的共价性影响了钛酸铅基化合物负热膨胀性.     

The evolution of morphology of ordered porous TiO2 films fabricated from sol-gel method assisted ZnO nanorod template

Ordered porous TiO₂ films, including TiO₂ nanotube arrays, are fabricated by a sol-gel dip-coating approach via ZnO nanorod templates obtained from aqueous solution approach. The results indicate that the morphologies of ordered porous TiO₂ films have been great affected by the sol-gel dip-coating cycle number. Open-ended TiO₂ nanotube arrays can be obtained in optimum dip-coating cycle numbers. The TiO₂ nanotubes with the inner diameter matching well with the diameters of ZnO nanorods, are well assembled and separate each other. When the cycle number is less than this optimum value, no intact porous TiO₂ film can be obtained. As the cycle number is larger than this optimum value, an ordered porous TiO₂ film with many throughout holes is formed. The evolutive mechanism of ordered porous TiO₂ films is proposed.