Generation and classification of the translational shape-invariant potentials based on the analytical transfer matrix method

For the conventional translational shape-invariant potentials (TSIPs), it has demonstrated that the phase contribution devoted by the scattered subwaves in the analytical transfer matrix quantization condition is integrable and independent of n. Based on this fact we propose a novel strategy to generate the whole set of conventional TSIPs and classify them into three types. The generating functions are given explicitly and the Morse potential is taken as an example to illustrate this strategy.     

Size and density control of silicon oxide nanowires by rapid thermal annealing and their growth mechanism

In this work, we demonstrate a fast approach to grow SiO₂ nanowires by rapid thermal annealing (RTA). The material characteristics of SiO₂ nanowires are investigated by field emission scanning electron microscopy, high-resolution transmission electron microscopy (HRTEM), high-angle annular dark-field (HAADF) imaging, electron energy loss spectroscopy (EELS), and energy-filtered TEM (EFTEM). The HAADF images show that the wire tip is predominantly composed of Pt with brighter contrast, while the elemental mappings in EFTEM and EELS spectra reveal that the wire consists of Si and O elements. The SiO₂ nanowires are amorphous with featureless contrast in HRTEM images after RTA at 900°C. Furthermore, the nanowire length and diameter are found to be dependent on the initial Pt film thickness. It is suggested that a high SiO₂ growth rate of >1 μm/min can be achieved by RTA, showing a promising way to enable large-area fabrication of nanowires.     

非线性偏振旋转锁模自相似脉冲光纤激光器的研究

利用耦合非线性薛定谔方程（CNLSE）为非线性偏振旋转（NPE）锁模自相似光纤激光器建立了一种新的数值模型.模型中,用CNLSE描述脉冲在单模光纤中的传播,在增益光纤中同时考虑了增益带宽和增益饱和作用,用传输矩阵描述构成NPE锁模的光学元件.优化了腔内净色散和光纤长度等参数,模拟了脉冲在激光腔内的演化特性,得到了典型的自相似脉冲运行区域及特点.在最佳自相似脉冲运行区域内,得到了能量约为7 nJ、脉宽约11 ps、线性啁啾的抛物脉冲.比较了不同腔内净色散条件下输出脉冲的特点,给出了三阶色散对输出脉冲的影响. 关键词： 自相似脉冲 非线性偏振旋转锁模 耦合非线性薛定谔方程 数值模拟     

Hydrogen bonding and π–π inter­actions in a laminar structure: benzene‐1,3‐dicarboxylic acid–4‐methyl­pyridine (1/2)

The title complex, C₈H₆O₄·2C₆H₇N, consists of two crystallographically independent 1:2 clusters of benzene‐1,3‐­dicarboxylic acid and 4‐methyl­pyridine. Each cluster, the components of which are linked by O—H⋯N hydrogen bonds, is almost planar by alignment of C—H⋯O hydrogen bonds. Herring‐bone ribbons of clusters are formed by other C—H⋯O hydrogen bonds, and these ribbons are further packed to form a laminar structure by π–π inter­actions.     

岩石破裂与渗流耦合过程细观力学模型

从岩石细观非均匀性的特点出发,应用弹性损伤力学、B iot渗流力学理论,对岩石破裂过程渗流-应力-损伤耦合模型进行了描述.算例表明,该模型能较好的模拟出岩石材料在水压和载荷作用下裂纹扩展路径不规则发展及稳态、瞬态渗流过程,裂纹扩展对渗流路径和流动过程起到明显的控制作用.     

一个新的损伤演化方程及其在层裂中的应用

 采用统计细观损伤力学方法,基于延性金属断裂过程的孔洞演化机理,提出一个新的损伤演化方程,该方程在一定的条件下与由空心球体胞模型导出的损伤方程形式相同。在此基础上,将新的损伤演化方程编入一维Lagrange有限差分动力学程序,对OFHC铜的平板对称正碰撞层裂实验进行了数值模拟,计算结果与实验吻合得较好。     

利用原子的塞曼光谱对半导体激光器进行稳频

中性原子的超精细能级在磁场中产生塞曼分裂 ,另外 ,左旋和右旋圆偏振光激发下原子的跃迁选择定则不同 ,因此 ,原子在超精细塞曼能级间的吸收谱峰相对无磁场条件下的吸收谱峰有一定的移动。利用这一点 ,验证了一种简单、灵活的方法对半导体激光器进行稳频 ,使激光器的线宽稳到小于 1MHz。通过对实验结果的分析 ,发现由左旋和右旋圆偏振光激发引起的原子吸收谱峰移动之和与饱和吸收峰半高宽相等时 ,稳频效果最好     

基于传递矩阵法的热声发动机频率设计计算

介绍利用传递矩阵法计算热声发动机的工作频率的思路和方法。理论分析表明该方法是切实可行的 ,和其他方法得到了相互的印证。利用该方法的计算结果和已发表的试验结果进行了对比分析。研究结果表明 ,相比已有的计算方法而言 ,传递矩阵法更加简单直观 ,方便于采用计算机编程计算复杂结构的热声系统的工作频率。     

异质膜纳米通道的构建及其应用研究

从生物体离子通道中得到启发,研究人员开发了一系列仿生纳米通道,通过对内外表面的化学修饰,实现了在仿生纳米通道受限空间内离子转运的智能调控.目前的研究主要集中在均质膜方向,均质膜单一的结构和功能限制了其进一步发展,研发制备过程简单、稳定性好和功能多样的异质膜逐渐成为研究热点.与均质膜相比,异质膜被赋予单独使用均质膜时无法...     

Miniaturizing sample spots for matrix-assisted laser desorption/ionization mass spectrometry

The trend of miniaturization in bioanalytical chemistry is shifting from technical development to practical application. In matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS), progress in miniaturizing sample spots has been driven by the needs to increase sensitivity and speed, to interface with other analytical microtechnologies, and to develop miniaturized instrumentation.We review recent developments in miniaturizing sample spots for MALDI-MS. We cover both target modification and microdispensing technologies, and we emphasize the benefits with respect to sensitivity, throughput and automation.We hope that this review will encourage further method development and application of miniaturized sample spots for MALDI-MS, so as to expand applications in analytical chemistry, protein science and molecular biology.