相对论效应对激光在等离子体中的共振吸收的影响

采用一维粒子模拟(PIC)方法，研究了相对论效应对P偏振激光斜入射非均匀等离子体时产生的共振吸收的影响. 计算表明，弱相对论情况下，在临界面附近产生的电子等离子体波的相对论非线性效应占主要作用；随着入射光场的逐渐增大，吸收率逐渐降低. 当入射光强超过3.7×10¹⁷W/cm²时，由于超短激光脉冲本身在等离子体中产生相对论效应、等离子体波破裂效应，以及参量不稳定过程激发等，吸收系数随着激光强度又开始增加. 固定等离子体密度标长，取不同的激光入射角、电子初始温度，相对论效应对吸收系数的影响是一致的. 关键词： 激光等离子体 相对论效应 共振吸收 粒子模拟     

一类Marangoni对流边界层方程的近似解析解

利用Adomain解析拆分和Padé逼近方法对由Marangoni对流诱发的层流边界层问题进行了研究, 提供了一种求解边界层方程的解析分析方法. 得到了问题的近似解析解并对相应的流动及传热特性进行了探讨. 本文所提出的思想方法可以用于解决其他科学和工程技术问题. 关键词： Marangoni对流 非线性 Adomain拆分法 近似解析解     

The periodic wave solutions for the (2 + 1)-dimensional Konopelchenko–Dubrovsky equations

More periodic wave solutions expressed by Jacobi elliptic functions for the (2 + 1)-dimensional Konopelchenko–Dubrovsky equations are obtained by using the extended F-expansion method. In the limit cases, the solitary wave solutions and trigonometric function solutions for the equations are also obtained.     

聚酰胺酸合成工艺研究

 采用超声波在线测量溶液粘度的方法，研究了合成聚酰胺酸过程中实验条件的影响，并对实验结果进行分析，由此确定了合成高分子量聚酰胺酸的最佳实验条件。研究表明：在加料次序为先加二胺后加二酐（二酐与二胺的摩尔比为1.01～1.02：1）、试剂中含水量尽可能少，反应温度0～5℃、反应时间以溶液粘度到达最大值为止的条件下，所合成的聚酰胺酸溶液粘度最大，可满足惯性约束聚变（ICF）充气腔靶端口膜的需要。     

BEPCⅡ高频发射机和环流器的调整和测试

北京正负电子对撞机升级改造工程(BEPCⅡ)将采用的频率500MHz、输出功率250kW的高频发射机和环流器已安装、调整、测试和验收完毕,这是国内建立的第一套500MHz/250kW发射机系统.本文将详细介绍机器的调测试的原理和各项测量内容及结果, 并比较设计指标和要求,来阐述此发射机的实际技术指标和测试性能.     

高温超导薄膜微波非线性研究的进展

文章介绍了高温超导薄膜微波非线性的主要特征，阐述了高温超导薄膜微波非线性产生的原因和相关的研究现状，指出了高温超导薄膜非线性研究中遇到的困难和尚未解决的问题．     

In Situ Observation of Skeletal Shape Transition during BaB2O4 Crystal Growth in High-Temperature Solution

The transition from a fiat solid-liquid interface to a skeletal shape during BaB2O4 （BBO） single crystal growth in Li2B4O7 flux is observed in real time by an optical high-temperature in-situ observation system. The movement of crystal step is also investigated. The observation results demonstrate that the steps propagate along and parallel to the fiat interface when the crystal size is small. Nevertheless, they will ‘bend＇ close to the face centre if the crystal size becomes greater. Atomic force microscopy reveals that more deposition places near the face centre give rise to the bending of advancing steps and thus the formation of a vicinal interface structure. Measurements of step velocity show that the velocity keeps nearly constant at different moments for one specific step, whereas the step on a newly formed layer advanced faster than that on a previously formed one when the crystal size is larger than 210μm or so. Thus interracial morphological instability occurs and a skeletal interface is obtained.     

1，4－二氟四苯基苯的合成、结构与构象

借助电子转移催化反应的方法，用电子给予体１，４－二锂四苯基丁二烯将惰性的三溴氟甲烷活化，并与之发生反应，产物１，４－二氟四苯基苯的结构经ＭＳ、ＮＭＲ和Ｘ射线单晶衍射确证，并以分子力学的方法对其进行了构象分析。     

Effect of carbon content on the microstructure and the cracking susceptibility of Fe-based laser-clad layer

The laser cladding of Fe-based alloys on a medium carbon steel substrate was performed using a CO₂ laser and Ar shielding gas that was blown into a molten pool. The microstructure and cracking susceptibility of the laser-clad layers were studied in terms of carbon additions. Results show that the small change of the carbon content in the alloy powders can obviously change the microstructure and properties of the layers. When the carbon content is in the range of 0.3–0.4 wt.%, the decrease of the carbon content in alloy powders will increase the hardness and toughness of the layers simultaneously under the same process parameters. As a result, crack-free coatings with high hardness can be obtained. As the carbon content increases from 0.2 wt.% to 0.4 wt.%, the segregation ratio of chromium increases, while the segregation ratios of nickel, manganese, and silicon first decrease and then increase. At the same time, a new designing principle concerning the composition and microstructure has been put forward, and the principal mechanisms of strengthening and toughening of the layers are fine-grain strengthening and low carbon martensitic phase transformation strengthening.     

Bis[μ‐1‐(1,10‐phenanthrolin‐2‐yl)‐2‐pyridone]bis{aqua[1‐(1,10‐phenanthrolin‐2‐yl)‐2‐pyridone]cadmium(II)} tetrakis(perchlorate)

In the title centrosymmetric binuclear complex, [Cd₂(C₁₇H₁₁N₃O)₄(H₂O)₂](ClO₄)₄, the Cd^II ion assumes a distorted octahedral geometry. There are π–π stacking interactions between the pyridine and 1,10‐phenanthroline ring systems of adjacent ligands at the same Cd^II centre. Intermolecular hydrogen bonds between the coordinated aqua ligand and the O atom of a keto group connect adjacent complex cations into extended chains. Hydrogen bonds also exist between the complex cations and the perchlorate anions. Compared with the fluorescence spectrum of the organic ligand, the complex displays strong fluorescent emission and an ipsochromic shift of the emission peaks, which may be attributed to the structural character.