Mizoroki–Heck and Suzuki–Miyaura reactions mediated by poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid)‐stabilized magnetically separable palladium catalyst

The purpose of this work was to synthesize and characterize a new magnetic polymer nanosphere‐supported palladium(II) acetate catalyst for reactions requiring harsh conditions. In this regard, an air‐stable, moisture‐stable and highly efficient heterogenized palladium was synthesized by the coordination of palladium(II) acetate with poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid)‐grafted modified magnetic nanoparticles with a core–shell structure. The structure of the newly developed catalyst was characterized using various techniques. The catalytic activity of the resultant nano‐organometallic catalyst was evaluated in Mizoroki–Heck and Suzuki–Miyaura reactions to afford the corresponding coupling products in good to excellent yields. High selectivity as well as outstanding turnover number (14 143, 4900) and turnover frequency (28 296, 7424) values were recorded for the catalyst in Suzuki–Miyaura and Mizoroki–Heck reactions, respectively. Magnetic separation and recycling of the catalyst for at least six runs became possible without any significant loss of efficiency or any detectable palladium leaching.     

Determination of the Heat Transfer Coefficient of Metal Oxide Based Water Nanofluids in a Laminar Flow Regime Using an Adaptive Neuro-Fuzzy Inference System

In order to enhance the thermal properties of turbine oil (TO), three different nanoparticles (CuO, Al₂O₃, and TiO₂) are loaded into the TO. To measure the thermal performance of nanoparticle-based TO nanofluids at laminar flow and under constant heat flux boundary conditions, an experimental setup was applied. The obtained data clearly demonstrate the positive effect of all nanoparticles on the heat transfer rate of TO. As the most important factor, the heat transfer coefficient of the abovementioned two-phase systems is increased upon increasing both the volume concentration and the flow rate. An adaptive neuro-fuzzy inference system (ANFIS) is applied for modeling the effect of critical parameters on the heat transfer coefficient of nanoparticle-TO based nanofluids numerically. The results are compared with experimental ones for training and test data. The results suggest that the developed model is valid enough and promising for predicting the extant of the heat transfer coefficient. R² and MSE values for all data were 0.990208751 and 108.1150734, respectively. Based on the results, it is obvious that our proposed modeling by ANFIS is efficient and valid, which can be expanded for more general states.     

Promising new catalytic properties of a Co (II)-carboxamide complex and its derived Co3O4 nanoparticles for the Mizoroki-Heck and the Epoxidation reactions

The new Co(II) - carboxamide complex ( 1 ) and Co₃O₄ nanoparticles ( 2 ), by way of thermal decomposition of ( 1 ) have been efficiently synthesised in the environment-friendly. X-ray diffraction reveals a slightly distorted octahedral coordination of cobalt (four nitrogens and two oxygens) in ( 1 ) and regular octahedral or tetrahedral ones (oxygens only) in ( 2 ). The investigation of ( 1 ) and ( 2 ) in the Mizoroki-Heck and epoxidation of alkens reactions showed them both to be powerful, green and inexpensive catalysts.     

The Processing of Pyrolysis Fuel Oil by Dielectric Barrier Discharge Plasma Torch

In present paper, an atmospheric-pressure low-temperature plasma treatment of pyrolysis fuel oil (PFO) was investigated in dielectric barrier discharge plasma torch reactor. The effect of the applied voltage and the volume of feedstock, as the main parameters, on the cracking of PFO were studied. By increasing the applied voltage from 10 to 16 kV, the production rate of hydrocarbons containing methane, ethylene, acetylene, propane, propylene, and C₄ rise 18 times. In this case, the production rate of hydrogen increases by approximately 14 times and reaches 7.27 × 10^?3 mol/min for 16 kV. In the feedstock volume investigation, based on limitation of reactor volume, the production rate of hydrocarbons decreased from 0.44 × 10^?3 to 0.15 × 10^?3 mol/min by increasing volume of feedstock from 1 to 5 cc.     

Determination of 11 Cannabinoids in Hemp Plant and Oils by Liquid Chromatography and Photodiode Array Detection

Chromatographia - Drug scheduling has directed the testing approaches for forensic laboratories since the 1970s when Cannabis (marijuana and hemp) and its psychoactive constituent,...     

Improved Method for the Total Synthesis of Azaperone and Investigation of Its Electrochemical Behavior in Aqueous Solution

Azaperone, with anti-anxiety and anti-aggressive activities used in veterinary medicine, is a member of the butyrophenone class. It is ordinarily utilized for a wide range of indications, such as sedation, obstetrics, and anesthesia. In this research, an improved synthetic route is presented for azaperone using a phase-transfer catalyst(PTC). In general, it was synthesized as a dopamine antagonist in four steps. The bis(2-chloroethyl) amine intermediate is easily obtained after the conversion of the alcohol groups into the chloride leaving group using thionyl chloride(95% yields). The alkylation of commercially available 2-amino pyridine in the presence of PTC was then carried out, giving 1-(pyridin-2-yl) piperazine with 75% yield. 1-(Pyridin-2-yl) piperazine was finally alkylated using 4-chloro-1-(4-fluorophenyl) butan-1-one to achieve azaperone with 60% yield. The butyrophenone intermediate was obtained via the Friedel-Crafts reaction of fluorobenzene with 4-chlorobutyryl chloride in the presence of AlCl₃. High efficiency, gentle reaction conditions, and fast and simple procedure are the advantages of this method. Also, the electrochemical oxidation behaviour of azaperone was investigated using cyclic and differential pulse voltammetry techniques. Cyclic voltammetric studies indicated an irreversible process for azaperone electro-oxidation with a peak potential of 0.78 V in a phosphate buffer solution(pH=7.0) vs. Ag/AgCl(saturated KCl) electrode. The value of the peak current vs. the azaperone concentration was enhanced linearly in the range of 10―70 μmol/L, and the detection limit was found to be 3.33 μmol/L.     

Self-assembly mechanism of PEG-b-PCL and PEG-b-PBO-b-PCL amphiphilic copolymer micelles in aqueous solution from coarse grain modeling

We followed the self-assembly of high-molecular weight MePEG- b -PCL (poly(methyl ethylene glycol)-block-poly(ε-caprolactone)) diblock and MePEG- b -PBO- b -PCL (poly(methyl ethylene glycol)-block-poly(1,2-butylene oxide)-block-poly(ε-caprolactone)) into micelles using molecular dynamics simulation with a coarse grain (CG) force field based on quantum mechanics (CGq FF). The triblock polymer included a short poly(1,2-butylene oxide) (PBO) at the hydrophilic-hydrophobic interface of these systems. Keeping the hydrophilic length fixed (MePEG₄₅), we considered 250 chains in which the hydrophobic length changed from PCL₄₄ or PBO₆- b -PCL₄₃ to PCL₆₂ or PBO₉- b -PCL₆₁. The polymers were solvated in explicit water for 2 μs of simulations at 310.15 K. We found that the longer diblock system undergoes a morphological transition from an intermediate rod-like micelle to a prolate-sphere, while the micelle formed from the longer triblock system is a stable rod-like micelle. The two shorter diblock and triblock systems show similar self-assembly processes, both resulting in slightly prolate-spheres. The dynamics of the self-assembly is quantified in terms of chain radius of gyration, shape anisotropy, and hydration of the micelle cores. The final micelle structures are analyzed in terms of the local density components. We conclude that the CG model accurately describes the molecular mechanisms of self-assembly and the equilibrium micellar structures of hydrophilic and hydrophobic chains, including the quantity of solvent trapped inside the micellar core.