Intermolecular interactions in (arene)chromium carbonyl compounds: prediction of chiral crystal packing from racemate structure

Six X-ray crystal structures are reported, all containing substituted triphenylmethanol derivative 4 either alone or as its mono or bis(chromium tricarbonyl) complexes. All four chromium complexes studied crystallize with two independent molecules in the crystallographic asymmetric unit. It is demonstrated that from the X-ray crystal structure of the acentric racemic (+/-)-(1pR,1' 'R)(1pS,1' 'S)-[Cr(CO)(3)(eta(6)-t-BuC(6)H(3)(CMeOMe)CPh(2)OH)], (+/-)-3, it is possible to deduce the 4-fold helical structure of the chiral (-)-(1pR,1' 'R) isomer, (-)-3. The bimetallic derivatives demonstrate the ability to control intermolecular interactions by the positioning of relative stereochemistry.     

The neomycin biosynthetic gene cluster of Streptomyces fradiae NCIMB 8233: characterisation of an aminotransferase involved in the formation of 2-deoxystreptamine

The biosynthetic gene cluster of the 2-deoxystreptamine (DOS)-containing aminoglycoside antibiotic neomycin has been cloned for the first time by screening of a cosmid library of Streptomyces fradiae NCIMB 8233. Sequence analysis has identified 21 putative open reading frames (ORFs) in the neomycin gene cluster (neo) with significant protein sequence similarity to gene products involved in the biosynthesis of other DOS-containing aminoglycosides, namely butirosin (btr), gentamycin (gnt), tobramycin (tbm) and kanamycin (kan). Located at the 5'-end of the neo gene cluster is the previously-characterised neomycin phosphotransferase gene (apH). Three genes unique to the neo and btr clusters have been revealed by comparison of the neo cluster to btr, gnt, tbm and kan clusters. This suggests that these three genes may be involved in the transfer of a ribose moiety to the DOS ring during the antibiotic biosynthesis. The product of the neo-6 gene is characterised here as the L-glutamine : 2-deoxy-scyllo-inosose aminotransferase responsible for the first transamination in DOS biosynthesis, which supports the assignment of the gene cluster.     

Selection of the cis and trans phosph(III)azane macrocycles [{P(mu-NtBu)}2(1-Y-2-NH-C6H4)]2(Y=O, S)

The 1 : 1 reactions of [ClP(mu-NtBu)]2 with the difunctional aromatic amines 1,2-1-YH-2-NH2-C6H4 in the presence of Et3N give the dimeric phosph(III)azane macrocycles [{P(mu-NtBu)2(1-Y-2-HN-C6H4)]2, predominantly as the cis isomer in the case of Y=O (1.cis) and as the trans isomer for Y=S (2.trans). Model M.O. calculations suggest that the selection of the cis and trans isomers is not thermodynamically controlled. The alternative isomers 1.trans and 2.cis are generated exclusively by the deprotonation of the model intermediates [(1-Y-2-NH2-C6H4)P(mu-NtBu)]2[Y=O (3), S (4)] with nBuLi followed by cyclisation with [ClP(mu-NtBu)]2. The solid-state structures of 1.cis/trans(50 : 50), 2.cis, 3 and 4 are reported.     

Low-energy mass spectra of some aliphatic ketones

The charge exchange mass spectra of a selection of C₅-C₇ ketones have been measured using [CS₂]⁺˙, [COS]⁺˙ and [N₂O]_+. as reagent ions. The low energy charge exchange with [CS₂]⁺˙ or [COS]⁺˙ provides simple primary ion mass spectra, which readily permit structure elucidation in contrast to metastable ion spectra. In several cases, isomer distinction is easier from the charge exchange mass spectra than from the electron impact mass spectra. The energy transfer from [N₂O]⁺˙ is sufficiently high for complex spectra resembling electron impact mass spectra to be obtained.     

Preparation of methyl (1R,2S,5S)- and (1S,2R,5R)-2-amino-5-tert-butyl-cyclopentane-1-carboxylates by parallel kinetic resolution of methyl (RS)-5-tert-butyl-cyclopentene-1-carboxylate

Comparison of the kinetic and parallel kinetic resolutions of methyl (RS)-5-tert-butyl-cyclopentene-1-carboxylate allows for the efficient synthesis of both (1R,2S,5S)- and (1S,2R,5R)-enantiomers of methyl 2-amino-5-tert-butyl-cyclopentane-1-carboxylate.     

Electronic gel protein transfer and identification using matrix-assisted laser desorption/ionization-mass spectrometry

An electronic protein transfer technique is described for achieving the rapid and efficient recovery of sodium dodecyl sulfate (SDS)-protein complexes from polyacrylamide gels. This process involves the use of small-dimension capillaries in physical contact with a resolved protein band within the polyacrylamide gel, providing a large potential drop and high electric field strength at the capillary/gel interface. Several factors controlling the electronic protein transfer, including the applied electric field strength, the electrophoresis buffer concentration, and the capillary dimension, are studied to further enhance the use of field-amplification for sample stacking of extracted SDS-protein complexes. As a result of sample stacking, the extracted proteins from a 50 ng gel loading are present in a narrow ( approximately 80 nL) and highly concentrated (0.46 mg/mL or 3.3 x 10(-5) M for cytochrome c) solution plug. Three model proteins with molecular mass ranging from 14 kDa (cytochrome c) to 116 kDa (beta-galactosidase) are stained by Coomassie blue and electrophoretically extracted from gels with protein loadings as low as 50 ng. The capillary format of the electronic protein transfer technique allows direct deposition of extracted proteins onto a matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) target. Various matrices and solvent compositions are evaluated for the analysis of extracted and concentrated SDS-protein complexes using MALDI-MS. The electronic protein transfer technique, when operated under optimized conditions, is demonstrated for the effective (>70% recovery), speedy (less than 5 min), and sensitive MS identification of gel resolved proteins (as low as 50 ng).     

Capillary electrophoresis with wavelength-resolved laser-induced fluorescence detection

Capillary electrophoresis (CE) enables rapid separations with high separation efficiency and compatibility with small sample volumes. Laser-induced fluorescence detection can result in extremely low limits of detection in CE. Single-channel fluorescence detection, however, furnishes little qualitative information about a species being detected, except for its CE migration time. Use of multidimensional information often enables unambiguous identification of analytes. Combination of CE with information-rich wavelength-resolved fluorescence detection is analogous with ultraviolet-visible diode-array detection and furnishes both qualitative and quantitative chemical information about target species. This review discusses recent advances in wavelength-resolved laser-induced fluorescence detection coupled with CE, with an emphasis on instrument design.     

Analysis of microgram amounts of particulate material by simultaneous multiwavelength AES

A unique simultaneous emission spectrograph is utilized to perform qualitative and quantitative analysis on trace quantities of solid particulates. The atomic emission spectroscopic system consists of a direct current plasma source and an echelle spectrograph with a charge injection device detector, enabling the system to simultaneously measure the wavelength range from 220 nm to 520 nm with 0.02 nm resolution at 300 nm. Monitoring all wavelengths simultaneously allows the qualitative and quantitative determination of most major and minor constituent in a trace quantity of sample with little prior knowledge about the sample. The ability to perform qualitative and quantitative analysis on particulates is demonstrated by evaluating NBS certified coal fly ash, as well as a sample taken from the respirator air filter at an acute care unit in a hospital.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

Evidence for orbital-specific electron transfer to oriented haloform molecules

Beams of hyperthermal K atoms cross beams of the oriented haloforms CF(3)H, CCl(3)H, and CBr(3)H, and transfer of an electron mainly produces K(+) and the X(-) halide ion which are detected in coincidence. As expected, the steric asymmetry of CCl(3)H and CBr(3)H is very small and the halogen end is more reactive. However, even though there are three potentially reactive centers on each molecule, the F(-) ion yield in CF(3)H is strongly dependent on orientation. At energies close to the threshold for ion-pair formation ( approximately 5.5 eV), H-end attack is more reactive to form F(-). As the energy is increased, the more productive end switches, and F-end attack dominates the reactivity. In CF(3)H near threshold the electron is apparently transferred to the sigma(CH) antibonding orbital, and small signals are observed from electrons and CF(3)(-) ions, indicating "activation" of this orbital. In CCl(3)H and CBr(3)H the steric asymmetry is very small, and signals from free electrons and CX(3)(-) ions are barely detectable, indicating that the sigma(CH) antibonding orbital is not activated. The electron is apparently transferred to the sigma(CX) orbital which is believed to be the LUMO. At very low energies the proximity of the incipient ions probably determines whether salt molecules or ions are formed.     

Carbolithiation of aromatic rings: cyclohexadienes from N-aroyl-2,2,6,6-tetramethylpiperidines

Benzamides whose nitrogen atom is part of a 2,2,6,6-tetramethylpiperidine ring are dearomatised by alkyllithiums, which attack them regioselectively to yield, after electrophilic quench, substituted cyclohexadienes.