An improved numerical simulator for multiphase flow in porous media

In basin modelling the thermodynamics of a multicomponent multiphase fluid flux are computationally too expensive when derived from an equation of state and the Gibbs equality constraints. In this article we present a novel implicit molar mass formulation technique using binary mixture thermodynamics. The two proposed solution methods, with and without cross derivative terms between components, are based on a preconditioned Newton‐GMRES scheme for each time‐step with analytical computation of the derivatives. These new algorithms reduce significantly the numerical effort for the computation of the molar masses, and we illustrate the behavior of these methods with numerical computations. Copyright © 2004 John Wiley & Sons Ltd.     

High performance liquid chromatographic separation of polar and non-polar chlorophyll pigments from algae using a wide pore polymeric octadecylsilica column

A method employing a wide pore polymeric reversed phase column has been developed for the separation of most of the chlorophylls and related compounds previously described as occurring in marine microalgae. The high selectivity toward molecular shape of this kind of stationary phase has enabled compounds of very similar structure, such as chlorophylls c₁, c₂ and Mg-divinylpheoporphyrin a₅ monomethyl ester, and chlorophyll a and the phytol-substituted chlorophyll c-like pigments, which commonly coelute on monomeric bonded phases, to be resolved in a single run. Some of these pigments, formerly thought to be a single compound, have, in fact, been demonstrated to be groups of two or more. The method has been successfully applied to both algal cultures and natural sea water samples. When visible light absorbance detection was used, the method proved suitable for separation of various carotenoids.     

Enhancement of the emission yield of silicon nanocrystals in silica due to surface passivation

The ability of surface passivation to enhance the photoluminescence (PL) emission of Si nanocrystals in SiO₂ has been investigated. Silicon precipitation in implanted samples takes place in a time scale of few minutes at 1100°C. For longer annealing at the same temperature, the PL intensity of the Si nanocrystals increases and eventually reaches saturation, while it correlates inversely with the amount of Si dangling bonds at the Si–SiO₂ interface (P_b centers), as measured by electron spin resonance. This combined behavior is independent on the silica matrix properties, implantation profiles and annealing atmosphere and duration. The observation that the light emission enhancement is directly related to the annealing of P_b centers is confirmed by treatment in forming gas. This mild hydrogenation at much lower temperature (450°C) leads to a complete passivation of the P_b defects, increasing at the same time the PL yield and the lifetime.     

Effect of cerium, holmium and samarium ions on the thermal and structural properties of the HZSM-12 zeolite

The study of the incorporation of rare earth elements as additives in Y zeolites is a very interesting field of research, mainly by its potential application as additives in catalytic cracking process. In this work was studied the thermal and structural properties of cerium, holmium and samarium supported on HZSM-12 zeolite. The obtained materials were characterized by X-ray diffraction (XRD), infrared spectroscopy (FTIR), nitrogen adsorption, thermogravimetry (TG/DTG), differential scanning calorimetry (DSC) and differential thermal analysis (DTA). TG/DSC/DTA analyses showed that the dehydration temperatures of RE/HZSM-12 zeolites (RE=Ce, Ho, Sm) increase in relation to pure HZSM-12. The acid properties were investigated by pyridine thermo desorption via TG. The results showed two events of mass loss attributed to elimination of pyridine adsorbed on the weak+medium acid sites and on the strong acid sites.     

Modeling the adsorption and precipitation processes of Cu(II) on humin

Humins (HU) are the most insoluble fraction of humic substances. Chemically, they can be considered as humic macromolecules bonded to the mineral matter of soil. The HU have a marked colloidal character and they are extremely important in retention of pollutants in soils. The aim of this work is to combine adsorption data with spectroscopic techniques in order to study the adsorption and precipitation processes of Cu(II) on HU. Analysis of sorption isotherms by means of several single-adsorption-process-based models makes it possible to obtain the speciation diagrams of Cu(II) species on HU surfaces. Further, FTIR (which provides information about the changes in the surface groups of the HU) and DRX (which shows the formation of possible crystalline phases on the HU surface) were used to determine the specific interactions of Cu(II) cations with the surface reactive groups of HU. The shape of the isotherms at constant pH varies with pH from L1-type (pH 2-4) to L3-type (pH 5-6) and S-type (pH 8), which indicates a change in the retention mechanism. When pH is 2 the retention of Cu(II), as [Cu(H(2)O)(6)](2+), is the preferred retention mechanism. The retained quantity of Cu(II) as [Cu(OH)(H(2)O)(5)](+) increases with pH. Starting from pH 4 the Cu(II) begins its precipitation, which is the preferred retention mechanism at pH 8. The presence of HU has a great influence on the precipitation process of Cu(II), giving rise to botalackite, which reveals epitaxial growth of crystals.     

Selective extraction of astaxanthin from crustaceans by use of supercritical carbon dioxide

An on-line supercritical fluid extraction (SFE) system coupled to a continuous flow manifold including a UV detector was used as a screening system to extract astaxanthin from crayfish, which was found to be the major carotenoid present in the samples. This compound constitutes the principal additive used to dye salmon flesh. The flow manifold was used to confirm the presence of astaxanthin in the crustacean samples. Also, an HPLC/UV-vis method was used to ascertain that this compound was the major carotenoid extracted under the optimum SFE conditions employed. The influence of SFE operating variables such as pressure, temperature, equilibration time, extraction time, trap temperature, and volume of CO₂ modifier was examined in order to maximize the efficiency of analyte extraction. The use of supercritical CO₂ enables the expeditious, selective, quantitative extraction of astaxanthin from crustaceans.     

A novel strategy towards the asymmetric synthesis of orthogonally funtionalised 2-N-benzyl-N-alpha-methylbenzylamino- 5-carboxymethyl-cyclopentane-1-carboxylic acid

The asymmetric synthesis of the orthogonally funtionalised compounds tert-butyl 2-N-benzyl-N-alpha-methylbenzylamino-5-methoxycarbonylmethylcyclopentane- 1-carboxylate and methyl 2-N-benzyl-N-alpha-methylbenzylamino-5-carboxymethylcyclo- pentane-1-carboxylate by a domino reaction of tert-butyl methyl (E,E)-octa-2,6- diendioate with lithium N-alpha-methylbenzyl-N-benzylamide initiated by a Michael addition, subsequent 5-exo-trig intramolecular cyclisation and posterior selective hydrolysis with trifluoroacetic acid is reported.     

Determination of oxidized and reduced glutathione, by capillary zone electrophoresis, in Brassica juncea plants treated with copper and cadmium

A rapid method of capillary zone electrophoresis is described to determine the oxidized (GSSG) and reduced (GSH) form of glutathione in plant tissue. In order to separate both analytes in a fused-silica capillary, the pH and composition of the electrolyte solution were optimized. The electrolyte composition was 100 mmol/L, borate 25 mmol/L Tris, and 0.2% w/v metaphosphoric acid (MPA), pH 8.2. Some instrumental conditions used to run the samples were hydrostatic injection for 30 s, 30 kV applied voltage, and UV detection (185 nm) at 25 degrees C. Linearity and useful range obtained for the calibration curves were optimum, with correlation coefficients about 0.999 in the 0-120 micromol/L range. The migration time was highly reproducible, less than 5 min being afforded to run a sample. Electrolyte buffer and samples required a careful pH control for optimal separation of both analytes. This aspect constitutes a critical analytical step when acids are used in the procedure for sample preparation. Simultaneous analysis of GSH and GSSG may provide a useful tool for comparative studies of plants in order to select those species with a potential capacity for detoxification from toxic elements or those appearing promising from phytoremediation for these elements.     

Synthesis of N,N'-Diacyl-1,2-di-(4-pyridyl)ethylenedianiines

Reaction of N-(4-pyridylmethyl)benzamide N-oxides with acetic anhydride yielded dimerization compounds. This dimerization occurs at the atom attached to the pyridine ring. These compounds so obtained were evaluated for analgesic and antiinflammatory activity.     

Asymmetric [2,3]-rearrangement of glycine-derived allyl ammonium ylids

The first examples of highly enantioselective [2,3]-sigmatropic rearrangements of acyclic allylic ammonium ylids are reported. Thus, a range of N-{2'-[(N'-allyl-N',N'-dialkyl)ammonium]}acetyl camphor sultams undergo rearrangement at 0 degrees C in DME solution with high diastereofacial control (up to 99:1 dr) to give allylglycines in generally high yield. The power of the method has been demonstrated in a rapid and efficient synthesis of (R)-allyl glycine.