动态光散射实验

动态光散射技术是测量纳米及亚微米颗粒粒径的有效方法．本文介绍了动态光散射实验的原理、实验装置及方法，并测量了粒径为85nm的聚苯乙烯水溶液的粒径，分析了实验产生误差的原因．     

催化动力学测定痕量砷(Ⅲ)

在醋酸介质中,发现痕量砷(Ⅲ)能灵敏地催化高碘酸钾氧化靛红la褪色的指示反应,研究了该催化反应的最佳条件与动力学参数,建立了一种新的测定痕量砷(Ⅲ)的方法。该法的线性范围0.0-40μg/LAs(Ⅲ),检测限为1.92×10-6g/L,用于环境水样中砷(Ⅲ)的测定,获得了满意的结果。     

Low-threshold, high-efficiency, high-repetition-rate optical parametric generator based on periodically poled LiNbO3

We report a high-repetition-rate optical parametric generator (OPG) with a periodically poled lithium niobate (PPLN) crystal pumped by an acousto-optically Q-switched CW-diode-end-pumped Nd:YVO_4 laser. For the maximum 1064nm pump power of 970mW, the maximum conversion efficiency is 32.9% under the conditions of 250℃, 1064nm pulse repetition rate of 22.6kHz and pulse width of 12ns, and the PPLN OPG threshold in the collinear case is less than 23.7μJ. The output power increases with the increase of the crystal temperature. The 1485－1553nm signal wave and 3383－3754nm idler wave are obtained by changing the temperature and the angle of the PPLN crystal.     

Melt rheology of polylactide/montmorillonite nanocomposites

In this article, the linear and nonlinear shear rheological behaviors of polylactide (PLA)/clay (organophilic‐montmorillonite) nanocomposites (PLACNs) were investigated by an Advanced Rheology Expanded System rheometer. The nanocomposites were prepared by master batch method using a twin‐screw extruder with poly(ε‐caprolactone) (PCL) as a compatibilizer. The presence of org‐MMT leads to obvious pseudo‐solid‐like behaviors of nanocomposite melts. The behaviors caused by the formation of a “percolating network” derived from the reciprocity among the strong related sheet particles. Therefore, the storage moduli, loss moduli, and dynamic viscosities of PLACNs show a monotonic increase with MMT content. Nonterminal behaviors exists in PLACNs nanocomposites. Besides the PLACNs melts show a greater shear thinning tendency than pure PLA melt because of the preferential orientation of the MMT layers. Therefore, PLACNs have higher moduli but better processibility compared with pure PLA. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3189–3196, 2007     

Photocatalytic Synthesis of Oxygenates from Gaseous CO2 and CH4 over Semiconductor

Photoinduced synthesis of CO2 and CH4 was investigated using a batch reaction system on several photoactive materials supported on silicon dioxide. Single semiconductor showed higher selectivity to C1 compounds. The production of C2-C3 oxygenates took place preferentially on composite semiconductor photocatalysts. In particular, it was found that acetone was the primary product over Cu/CdS-TiO2/SiO2.     

红黑排序混合算法收敛速度分析

The algorithm of applying the block Gauss elimination to the Red-Black or-dering matrix to reduce the order of the system then solve the reduced system byiterative methods is called Hybrid Red-Black Ordering algorithm.In this paper,we discuss the convergence rate of the hybrid methods combined with JACOBI,CG,GMRES(m).Theoretical analysis shows that without preconditioner thesethree hybrid methods converge about 2 times as fast as the corresponding natural ordering methods.For the case that all the eigenvalues is near the real axis, the GMRES(m) algorithm converges about 3 times faster than the natural ordering GMRES(m).Various numerical experiments are presented.For large scale prob-lem with preconditioners, numerical experiments show that the GMRES(m) hybrid methods converge from about 3 times to even 5 times as fast as the natural order-ing methods and the computing time is reduced to about 1/3 even 1/6 of that of the natural ordering methods.     

求解非对称线性方程组的QMRGCGS方法

1 引言 求解非对称线性方程组Ax=b的双共轭梯度方法(BCG)[3]和它的变形共轭梯度平方方法(CGS)[6]都有典型的不规则收敛行为,后来Freund和Nachtigal提出一种BCG类方法,即拟极小剩余方法(QMR)[7],用来补救BCG方法的收敛性并且产生了光滑的收敛曲线。然而,象BCG方法一样,QMR方法要用到系数矩阵A及其转置A~T与向量的乘积,为了解决这一问题,Freund提出TFQMR方法,此方法具有拟极小剩余性,同时不需用到A~T与向量的乘积。     

常规投资项目的外部收益率研究

揭示了常规投资项目外部收益率的实质 ,明确了常规投资项目外部收益率的缺陷 .研究表明 ,在实际工作中 ,不宜用外部收益率替代内部收益率进行常规投资项目的经济性分析评价     

Photo-induced effect in the layered perovskite manganite La<Subscript>1.2</Subscript>Sr<Subscript>1.8</Subscript>Mn<Subscript>1.8</Subscript>Co<Subscript>0.2</Subscript>O<Subscript>7</Subscript>

It is helpful to study the photo-induced effect in the perovskite manganites not only for elucidating the mechanism of colossal magnetoresistance (CMR) effect but also for potential applications in technology. The laser-induced effect in the Co doping layered perovskite manganites La_1.2Sr_1.8Mn_1.8Co_0.2O₇, is studied in this paper and the obtained results are also compared with that gained in the Nd-doping manganites with cubic perovskite structure.     

Experimental 511 W Composite Nd：YAG Ceramic Laser

We demonstrate a 511 W laser diode pumped composite Nd：YAG ceramic laser. The optical pumping system is consisted of five laser diode stacked arrays arranged in a pentagonal shape around the ceramic rod whose size is φ6.35×144mm. When the pumping power is 1600 W, the cw laser output up to 511 W at 1064nm can be obtained with a linear piano-piano cavity, and the optical-to-optical efficiency is 31.9%. To our knowledge, this is the highest value of laser output by using a newly invented composite Nd：YAG ceramic rod as the gain medium.