多元醇及其二元混合物固-固相变的IR研究

固固相变储能物质多元醇类以其有适宜的转变温度、较高的转变焓、具有经济和技术潜力而受到人们的重视,已在热力学和动力学等方面对其进行广泛和深入的研究[1-3],并通过红外光谱法研究了几种纯多元醇固固转变的机理[1].本文对几种多元醇及其二元混合物进行变温红外光谱的测定,进一步探讨了变化的规律.1　实　验11　药品:新戊二醇(ＮＰＧ)为保证试剂(日本东京化成株式工业会社),三羟甲基乙烷(ＰＧ)超纯(日本东京化成株式工业会社),季戊四醇(ＰＥ)化学纯(北京化学试剂公司).12　仪器美国ＰＥ公司Ｍ1730型富里叶变换红外光谱仪;日本Ｅ012Ａ号Ｈ…     

Preparation and properties of zirconia nanotube-supported 12-tungstophosphoric acid catalyst

Zirconia nanotube-supported H₃PW₁₂O₄0 (HPW) catalysts exhibit high catalytic activities in the synthesis of fatty acid ethyl ester.     

Effect of ultrasound on the microstructure of polystyrene in cyclohexane: a synchrotron small-angle X-ray scattering study

Synchrotron small-angle X-ray scattering technique has been used to study the effect of ultrasound on the microstructure of polystyrene (PS) in cyclohexane solutions. The results show that the intramolecular radius of gyration (R _g) decreases with ultrasound, indicating the shrinkage and collapse of PS chains. There is an exponential relationship between R _g and the molecular weight of PS (M _w), and the exponent changes from 0.5 to 0.417, as the ultrasound time is increased. This means that the shape of PS chain changes from random coil to shrunken form. The Kratky plots also confirm the shape transformation of PS chains induced by ultrasound. Moreover, the intermolecular correlation length increases with the ultrasound time, which is indicative of the entanglement of PS chains.     

Fabrication of flowerlike polymer superstructures using polymer/zeolite composites prepared with supercritical CO2

We report a route to the fabrication of unique flowerlike polymer superstructures with uniform petals at the nanoscale. In this method, polymer/zeolite composite is first prepared by loading corresponding monomer and initiator into the channels of the host zeolite with the aid of supercritical (SC) CO2, followed by thermal polymerization of monomers in the channels of the zeolite. The resultant polymer/zeolite composite is then treated with HF aqueous solution to allow the self-aggregation of the polymer and the inorganic components to form the polymeric layers and inorganic layers. Unique microscale flowerlike polymer superstructures are obtained after further treatment with HF aqueous solution. Different techniques, such as scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and thermogravimetry (TG), have been used to characterize the microflowers.     

铝柱联合成皂石上三甲苯转化的研究

以１，３，５－ＴＭＢ和１，２，４－ＴＭＢ转化为模型反应，探讨了铝柱联合成皂石（简称Ａｌ－ＰＳＳ）上表面酸性质的特点。结合不同脱附温度下吡啶吸附量及ＮＨ＿３－ＴＰＤ研究，实验证明，Ａｌ－ＰＳＳ表面具有数目较多，强度较大的酸性中心　和较弱的碱性中心　，与铝柱联天然膨润土（简称Ａｌ－ＣＬＢ）比较，有较高的脱烷基选择性。两种三甲苯在Ａｌ－ＰＳＳ上的转化，不论是单一反应物还是二者混合反应物，其产物分布基本相同，四甲苯在其异构体中含量均高达８０％，说明在本研究反应条件下，两种探针分子以Ａｌ－ＰＳＳ为催化剂进行转化，其产物结构由催化剂结构和性质决定。     

新型吸附树脂对苯乙酸的吸附热力学研究

研究了苯乙酸在新型超高交联树脂AH、NDa-150和大孔吸附树脂(Amberlite XAD-4)上的平衡吸附数据，测定了288K、303K和318K温度下的吸附等温线，结果表明吸附过程符合Langmuir吸附等温方程。苯乙酸在AH、NDa-150上的吸附容量分别比在Amberlite XAD-4上的吸附容量最高高出90％、113％，这主要归因于AH、NDa-150表面的极性基团及树脂的微孔结构．Langmuir吸附等温线、相对吸附容量以及等量吸附焓变表明，苯乙酸在AH树脂上的吸附是物理吸附和化学吸附共同作用的结果．对苯乙酸被3种树脂吸附的吸附焓变、自由能变、吸附熵变也作了计算，并对吸附行为作了合理的解释。     

两种新型杯（4）芳烃衍生物用作毛细管气相色谱固定相的研究

合成了两种新型的杯（４）芳烃衍生物：５－１′，１′－二甲基十一烯氧基苯基甲基－１１，１７，２３－三－１，１－二甲基乙基－２５，２６，２７，２８－四苄氧基杯（４）芳烃Ｃ（４）ＴＢ）及５－１′，１′－二甲基十一烯氧基苯基甲基－１１，１７，２３－三－１′，１′－二甲基－２５，２６，２７，２８－四乙氧羰甲氧基（Ｃ（４）ＴＥＣＭ）其结构经元素分析ＩＲ，＾１ＨＮＭＲ，ＭＳ的数据证实，分别将其与ＯＶ－１７０１固     

Compressed CO2 in AOT reverse micellar solution: effect on stability, percolation, and size

The effects of compressed CO(2) in sodium bis-2-ethylhexylsulfosuccinate (AOT)/decane reversed micellar solution on the stability of the micelles, interface, and micelle/micelle interactions were studied. It was demonstrated that the compressed gas could increase the solubilization of water in this system. The formation of the stabilized one-phase microemulsion was confirmed by conductivity measurements. A shift in percolation threshold to higher temperature was observed after compressed gas was added. The gyration radius (R(g)) of the reverse micelles was determined using SAXS. R(g) increases with the addition of water, while it decreases appreciably with increasing pressure of compressed gas at fixed W(0). These results were interpreted in terms of an increase of the rigidity of the interface layer and a decrease of the interdroplet attraction. The results of this work provide useful information to get insight into the mechanism of cosurfactants to stabilize reverse micelles.     

Surface fluorination and electrochemical behavior of petroleum cokes graphitized at medium and high temperatures for secondary lithium battery

The surface structure and electrochemical performance have been investigated of petroleum cokes heat-treated at 2100 and 2600 °C (abbreviated to PC2100 and PC2600) and those fluorinated by elemental fluorine at 200 and 300 °C. XPS study indicated that surface fluorine was covalently bonded to carbon and surface fluorine contents were in the range of 4.9-17.8 at.%. Surface oxygen was reduced by fluorination. BET surface areas were nearly the same before and after fluorination. Fluorination enhanced D-band intensity in two Raman shifts observed at 1580 cm⁻¹ (G-band) and 1360 cm⁻¹ (D-band), indicating the increase in the surface disordering. At a high current density of 150 mA/g, the capacity increase was observed for PC2100 fluorinated at 200 °C and for PC2600 fluorinated at 200 and 300 °C. The most interesting result was the increase in first coulombic efficiencies by surface fluorination. First columbic efficiencies for PC2600 fluorinated at 300 °C were increased by 12.1% at 60 mA/g and by 25.8% at 150 mA/g, respectively. The impedance measurements showed that the resistances of surface films on carbon electrodes were increased by fluorination, however, the charge transfer resistances were decreased by 12.3% for PC2100 fluorinated at 200 °C, and by 27.5 and 6.4% for PC2600 fluorinated at 200 and 300 °C, respectively. The reduction of the charge transfer resistances was consistent with increase in the charge capacities for PC2100 fluorinated at 200 °C and PC2600 fluorinated at 200 and 300 °C.