Crystallization and melting behaviors of polystyrene-b-poly(ethylene-co-butene) block copolymers

Non-isothermal and isothermal crystallization behaviors of polystyrene-b-poly(ethylene-co-butene) (PSt-b-PEB) block copolymers with different compositions and chain lengths were investigated by differential scanning calorimetry (DSC). The results show that crystallization of PEB block is strongly dependent on the composition. Crystallization temperature (T_c), melting temperature (T_m) and fusion enthalpy (ΔH_f) increase rapidly with PEB volume fraction (V_E) for block copolymers with V_E below 50%, but there is little change when PEB block becomes the major component. Glass transition temperature (T_g) of the PSt block and order-disorder transition temperature (T_ODT) of block copolymers also have a weak effect. The isothermal crystallization kinetics results show that Avrami exponent (n) was strongly dependent on the composition and crystallization temperature. For the block copolymers with V_E below 38.7 vol%, the values of n vary between 0.9 and 1.3, indicating that crystallization is confined. For the PSt-b-PEB block copolymers with V_E higher than 50%, fractionated crystallization behavior is usually observed. A two-step isothermal crystallization procedure is applied to these block copolymers. It is found that breakout crystallization occurs at higher T_c, but confined at lower T_c. Two overlapped melting peaks are observed for the block copolymers with fractionated crystallization behavior after two-step crystallization, and only the higher melting peak corresponding to breakout crystallization can be used to derive equilibrium melting temperature.     

Itosides A – I,New Phenolic Glycosides from Itoa orientalis

Eight new benzoylated gentisyl alcohol (=2‐(hydroxymethyl)benzene‐1,4‐diol) glucosides, itosides A–H ( 1 – 8 ), together with the new pyrocatechol (=benzene‐1,2‐diol) glycoside itoside I ( 9 ) were isolated from the bark and twigs of Itoa orientalis (Flacourtiaceae). In itosides B–D ( 2 – 4 ), the gentisyl alcohol moiety was esterified by 1‐hydroxy‐6‐oxocyclohex‐2‐ene‐1‐carboxylic acid, while itosides E–H ( 5 – 8 ) contained instead an additional 2‐hydroxybenzoic acid moiety. The compounds were accompanied by the known derivatives 4‐hydroxytremulacin ( 10 ), poliothyrsoside ( 11 ), poliothyrsin ( 12 ), homaloside D ( 13 ), tremulacin, and pyrocatechol β‐D ‐glucopyranoside. The structures of the new compounds were elucidated by spectral and chemical methods.     

TiO2-CdS-MCM-41复合纳米材料的合成和表征

利用γ-巯丙基三甲氧基硅烷及表面预吸附水解技术在MCM-41介孔分子筛孔道内部以化学键合的形式依次引入了CdS和TiO2纳米粒子.紫外-可见吸收光谱结果表明,借助于巯基的络合能力,MCM-41能有效地从反胶束中萃取CdS纳米粒子.利用小角XRD谱图成功地跟踪观察到了MCM-41介孔分子筛随纳米粒子的引入而产生的孔径变化.     

金属—血清白蛋白的结构研究——Ⅵ.等离子点附近HSA和BSA中Cu(Ⅱ)和Ni(Ⅱ)金属中心的结构

本文用紫外光谱研究了等离子点附近HSA或BSA ¹Cu(Ⅱ)或Ni(Ⅱ)金属中心的结构。结果表明:在pH₄.0～5.3时,Cu(Ⅱ)—HSA配合物在低浓度时独具五配位的四方锥构型,高浓度时(>10^-4mol·l^-1)为四配位的四方平面构型,Cu(Ⅱ)—BSA、Ni(Ⅱ)—BSA在上述pH范围内均只存在四方平面构型。Cu(Ⅱ)、Ni(Ⅱ)结合位置与生理pH下的相同,均在白蛋白的N端三肽段上,与Asp^{1相似文献}   

氨基酸柱前衍生化的3种新荧光试剂的光谱特性及高效液相色谱研究

合成了３种新的荧光标记试剂：吖啶－Ｎ－乙酰氯，咔唑－９－乙酰氯和咔唑－９－丙酰氯。它们的最大发射降激发波长分别为４３０ｎｍ，３６８ｎｍ，和３６５ｎｍ。３种衍生化试剂与氨基酸形成的衍生物在ｐＨ６．５的条件下结合梯度洗脱程序在Ｃ１８反相柱上对色谱条件进行了优化。     

〔Co(H2O)4(NCS)2〕(18-冠-6)的分子和晶体结构

[Co(H_2O)_4(NCS)_2](18-冠-6)的晶体属于正交晶系,空间群:D-P。晶胞参数:a=9.167(2)A,b=13.268(1)A,c=19.292(3)A,Z=4。结构用重原子法解出,经最小二乘法修正,最终的=0.029。钴(Ⅱ)与两个异硫氰酸根、四个水分子配位,形成顺式八面体配位单元,并通过其中的水分子与18-冠-6以氢键相结合,形成标题的分子和晶体。     

Stripping voltammetry of copper and lead using gold electrodes modified with self-assembled monolayers

One problem associated with using bare solid metal electrodes, such as gold and platinum, in stripping analysis to determine heavy metal ions such as lead and copper ions in dilute solutions is that underpotential deposition (UPD) gives multiple stripping peaks in the analysis of mixtures. These peaks are often overlapped and cannot be conveniently used for analytical purposes. Bifunctional alkylthiols, such as 3-mercaptopropionic acid, with an ionizable group on the other terminal end of the thiol can form self-assembled monolayers (SAMs) on the surface of the gold electrode. It is shown that such an SAM-modified gold electrode minimizes the UPD effects for the stripping analysis of lead and copper. The anodic peak potential shifts and the peak shape changes, indicating that the SAM changes the deposition and stripping steps of these heavy metal ions. Thus, the sensitivity levels for both single species and mixtures can be significantly improved for the conventional solid electrodes. The mechanism of the deposition reaction at the SAM-modified gold electrodes is discussed. Received: 29 May 1997 / Accepted: 24 June 1997     

烷基紫精/五氧化二钒插层化合物的组装、表征及磁性的研究

以烷基紫精(alkylviologens; 又称紫精或紫罗精)为有机客体、层状五氧化二钒为无机主体, 在液、固两相反应体系中, 利用I^－与V^5＋的氧化还原反应, 使烷基紫精阳离子通过静电引力作用进入被还原的五氧化二钒层板之间, 形成一系列新颖的无机-有机插层化合物. 并运用X射线粉末衍射(XRD)、红外(FT-IR)、X射线光电子能谱(XPS)、紫外-可见漫反射(UV-vis DRS)等方法对其进行了表征. XRD分析结果证明, 五氧化二钒的层间距随着烷基紫精中烷基链的增长而增大, 但其结晶度随着烷基紫精阳离子中烷基链的增加而降低. XPS研究表明, 该类材料中的钒是以V^4＋和V^5＋两种混合价态存在, 氧原子处于三种不同的化学环境, 这些现象说明烷基紫精阳离子的引入对五氧化二钒的骨架结构影响不大, 主体五氧化二钒的层状结构保存完好; 氮原子处于两种不同的化学环境, 证实插层化合物中主客体之间相互修饰的协同效应, 有可能起到了稳定客体分子激发态的作用, 同时FT-IR光谱中芳香环特征谱带强度的变化也进一步证明了这一结论. UV-vis DRS分析发现由于主客体的相互作用使插层化合物在紫外和可见光区域产生特殊的光吸收性质. 从磁性研究的结果可以看出, 在温度低于15 K时, 插层化合物RV2为反铁磁性的有序结构; 当温度高于15 K时, 转变为顺磁性, 表现出磁无序结构.     

STRUCTURE EVOLUTION OF POLYMER CHAINS FOR NECKING FORMATION IN HIGH-SPEED FIBER SPINNING PROCESS

Finite element method is used to simulate the high-speed melt spinning process,based on the equation system proposed by Doufas et al.Calculation predicts a neck-like deformation,as well as the related profiles of velocity,diameter, temperature,chain orientation,and crystallinity in the fiber spinning process.Considering combined effects on the process such as flow-induced crystallization,viscoelasticity,filament cooling,air drag,inertia,surface tension and gravity,the simulated material flow behaviors are consistent with those observed for semi-crystalline polymers under various spinning conditions.The structure change of polymer coils in the necking region described by the evolution of conformation tensor is also investigated.Based on the relaxation mechanism of macromolecules in flow field different types of morphology change of polymer chains before and in the neck are proposed,giving a complete prospect of structure evolution and crystallization of semi-crystalline polymer in the high speed fiber spinning process.     

An unprecedented 8-fold interpenetrating diamondoid-like coordination polymer containing a Cu+(4)(RCO2)(4) cluster as connecting node

The reaction of Cu(I)(CH(3)CN)(4)BF(4) with 4-pyridylacrylic acid (4-HPYA) affords an unprecedented 8-fold interpenetrating diamondoid-like coordination polymer network [Cu(I)(3)(4-PYA)(2)(H(2)O)(BF(4)) ] (1) with a Cu(+)(4)(CO(2))(4) cluster as connecting node. The interpenetration in metal coordination polymers is the highest degree ever found within diamondoid nets containing a cluster as connecting note. Its fluorescent property was also reported.