5-异烟酰胺异钛酸构筑的Cu(Ⅰ)-Eu和Ni(Ⅱ)-Eu化合物的合成、晶体结构和性质研究

利用不同过渡金属盐在溶剂热中合成了2个新型杂核化合物{[CuEu₂（INAIP）₃（HCOO）（H₂O）₃]·3H₂O}_n（1）和{[NiEu₂（INAIP）₄（H₂O）₄]·4H₂O}_n（2）（INAIP=异烟酰胺吡啶基异酞酸根）,并对其进行了元素分析、IR及X-射线衍射法表征。晶体结构研究表明：配合物1和2都属于三斜晶系,P1空间群。晶胞参数：配合物1a=1.0887（3）nm,b=1.5158（4）nm,c=1.5644（2）nm,V=2.3332（10）nm³,Z=2,D_c=1.955g·cm^-3,μ=3.203mm^-1,F（000）=1352,R_int=0.027,R₁=0.0505,wR₂=0.1309。配合物2a=1.0134（3）nm,b=1.0836（6）nm,c=1.3741（2）nm,V=1.4530（9）nm³,Z=1,D_c=1.878g·cm^-3,μ=2.554mm^-1,F（000）=818,R_int=0.0458,R₁=0.0341,wR₂=0.0869。配合物1是由配体异烟酰胺吡啶基异酞酸连接而成的三维二重贯穿sqc27拓扑结构,而配合物2是由配体异烟酰胺吡啶基异酞酸连接稀土铕离子形成二维层状结构,该二维层通过Ni-O和Ni-N键连接成三维非贯穿网络结构。配合物1和2具有典型的稀土铕离子红色荧光和高的热稳定性。     

两个由两性二酸配体构筑的Cd(Ⅱ)低维配合物的合成、结构及荧光性质

利用合成的两性离子二酸配体1-(4-carboxylatobenzyl)pyridinium-4-carboxylate(HL), 通过调变合成条件, 制备了2个低维的配合物{Cd(L)₂·4H₂O}_n(1), 和{[Cd(L)(N₃)]·3H₂O}_n (2), 并对其进行了元素分析(EA)、红外光谱(IR)、热重(TG)、荧光光谱及X-射线单晶衍射测定。分析结果显示化合物1中八配位的Cd(Ⅱ)离子被4个L配体连接形成一维链状结构。而化合物2中六配位的Cd(Ⅱ)离子被双羧基-叠氮三重桥联形成二维层状结构。固体荧光测试表明配体的配位方式明显影响其荧光发射。     

The study of the stability of aqueous three-phase fire-resistant foam in typical liquidus hydrocarbons

The utilization of solid particles in aqueous foam has a great potential in improving fire fighting efficiency. In this study, aqueous foam supported by micro fly-ash (FA) was prepared and its stability in a specific type of oil was characterized. Firstly, different amount of FA was added to study the influence of FA concentration on foamability. It showed that within a specific extent, foam expansion ratio increased with the increasing of FA concentration. And compared with conventional foams, oil resistance of FA stabilized foams, which was investigated by analyzing drainage rate and evolution process with a self-made apparatus, was remarkably improved when FA concentration exceed 4.8wt.%. Secondly, SiO₂ and Al₂O₃ particles with different median sizes were used to study the effect of particle size on stability. However, the smaller hydrophilic particles didn’t behave better as expected. Moreover, the foam stability in three hydrocarbons was evaluated in the same way. The results indicated that the short chain hydrocarbons had much stronger detrimental effect to both two-phase foam and three-phase foam. But overall, the three-phase foam stabilized by FA exhibited much better oil resistance, so it can be used as a promising material for pool fire extinguishing and prevention.GRAPHICAL ABSTRACT     

Determination of trace amounts of chromium (VI) by flow injection analysis with chemiluminescence detection

A new sensitive chemiluminescence (CL) method combined with continuous flow injection analysis is described for the determination of Cr(VI). Strong CL signals were generated by Cr(VI)-catalysed oxidation of gallic acid in the presence of potassium permanganate and hydrogen peroxide. Effects of reagent concentrations, temperature, pH, flow rates, mixing coil length and mixing flow sequences on the chemiluminescence intensity were studied. Under the optimised experimental conditions, the relationship between the logarithm of concentration (log?C) of Cr(VI) and the logarithm of intensity (log?I) is linear over the range of 2?×?10^?11 – 5?×?10^?4?mol?L^?1, with the detection limit (3σ) of 4?×?10^?12?mol?L^?1. Relative standard deviation of ten measurements of 1?×?10^?9?mol?L^?1 Cr(VI) is 1.7%. This flow injection analysis (FIA) system proved to be able to analyse up to 40 samples h^?1. Effects of various interferences possibly present in the water samples were investigated. Most cations and anions, as well as organic compounds, did not interfere with the determination of Cr(VI) in water samples. The experimental results obtained for chromium in reference materials were also in good agreement with the certified values.     

Retention behavior of a homologous series and positional isomers of aliphatic amino acids in hydrophilic interaction chromatography

The retention behavior of several series of free α‐ and ω‐amino acids and positional isomers of amino pentanoic acid in the hydrophilic interaction chromatography mode (HILIC) was studied. The study was carried out on three stationary phases followed by post‐column derivatization with fluorescence detection in order to describe the retention mechanism of the tested amino acids. The effect of chromatographic conditions including acetonitrile content in the mobile phase, mobile phase pH (ranging from 3.5 to 6.5) and concentration of buffer in the mobile phase was investigated. The effect of the number of carbon atoms (n_C) in aliphatic chains of the individual homologue of α‐ and ω‐amino acids and the logarithm of the partition coefficient (logD) on retention was also a part of the presented study. A good correlation (r > 0.98) between the logk and logD values of amino acids or n_C, respectively, was observed. The described linear relationships were subsequently applied to predict the retention behavior of individual members of the homologous series of amino acids and to optimize the mobile phase composition in HILIC. The obtained results confirmed that the retention mechanism of α‐amino acids, ω‐amino acids and positional isomers of amino acids was based on the logD values and the number of carbon atoms in the aliphatic chains of amino acids. The elution order of ω‐amino acids and positional isomers of amino pentanoic acid was strongly dependent on the mobile phase pH in the investigated range whereas the retention factors of all α‐amino acids remained essentially unchanged on all tested stationary phases.     

Comparative Analysis of Chemical Constituents in Different Parts of Lotus by UPLC and QToF-MS

Six parts of lotus (seeds, leaves, plumule, stamens, receptacles and rhizome nodes) are herbal medicines that are listed in the Chinese Pharmacopoeia. Their indications and functions have been confirmed by a long history of clinical practice. To fully understand the material basis of clinical applications, UPLC-QToF-MS combined with the UNIFI platform and multivariate statistical analysis was used in this study. As a result, a total of 171 compounds were detected and characterized from the six parts, and 23 robust biomarkers were discovered. The method can be used as a standard protocol for the direct identification and prediction of the six parts of lotus. Meanwhile, these discoveries are valuable for improving the quality control method of herbal medicines. Most importantly, this was the first time that alkaloids were detected in the stamen, and terpenoids were detected in the cored seed. The stamen is a noteworthy part because it contains the greatest diversity of flavonoids and terpenoids, but research on the stamen is rather limited.     

Broadband Visible Light-Absorbing [70]Fullerene-BODIPY-Triphenylamine Triad: Synthesis and Application as Heavy Atom-Free Organic Triplet Photosensitizer for Photooxidation

A broadband visible light-absorbing [70]fullerene-BODIPY-triphenylamine triad (C₇₀-B-T) has been synthesized and applied as a heavy atom-free organic triplet photosensitizer for photooxidation. By attaching two triphenylmethyl amine units (TPAs) to the π-core of BODIPY via ethynyl linkers, the absorption range of the antenna is extended to 700 nm with a peak at 600 nm. Thus, the absorption spectrum of C₇₀-B-T almost covers the entire UV–visible region (270–700 nm). The photophysical processes are investigated by means of steady-state and transient spectroscopies. Upon photoexcitation at 339 nm, an efficient energy transfer (ET) from TPA to BODIPY occurs both in C₇₀-B-T and B-T, resulting in the appearance of the BODIPY emission at 664 nm. Direct or indirect (via ET) excitation of the BODIPY-part of C₇₀-B-T is followed by photoinduced ET from the antenna to C₇₀, thus the singlet excited state of C₇₀ (¹C₇₀^*) is populated. Subsequently, the triplet excited state of C₇₀ (³C₇₀^*) is produced via the intrinsic intersystem crossing of C₇₀. The photooxidation ability of C₇₀-B-T was studied using 1,5-dihydroxy naphthalene (DHN) as a chemical sensor. The photooxidation efficiency of C₇₀-B-T is higher than that of the individual components of C₇₀-1 and B-T, and even higher than that of methylene blue (MB). The photooxidation rate constant of C₇₀-B-T is 1.47 and 1.51 times as that of C₇₀-1 and MB, respectively. The results indicate that the C₇₀-antenna systems can be used as another structure motif for a heavy atom-free organic triplet photosensitizer.     

纳米表面相互作用及振动测头模型

如何实现高精度的测量是现代制造业及微电子技术领域的热点问题之一. 基于微纳米测头的三坐标测量机是当前实现高精度测量的重要手段. 随着测量尺寸的减小, 常用的纳米/微纳尺度的测头与待测表面之间形成静态接触, 其表面相互作用成为了影响其测量精度和可靠性的关键因素之一. 本文基于一种触发式振动测头, 研究了其动力学模型, 并通过对测头纳米尺度表面相互作用的理论分析及数值模拟, 确立了测头振动参数与表面相互作用之间的关联. 实验研究表明, 参数优化后的谐振微纳测头能有效抑制表面作用带来的干扰, 提高测量精度.     

Topology change from quantum instability of gauge theory on fuzzy CP

Many gauge theory models on fuzzy complex projective spaces will contain a strong instability in the quantum field theory leading to topology change. This can be thought of as due to the interaction between space–time via its noncommutativity and the fields (matrices) and it is related to the perturbative UV–IR mixing. We work out in detail the example of fuzzy CP²${\mathbf{CP}}^2$ and discuss at the level of the phase diagram the quantum transitions between the 3 spaces (space–times) CP²${\mathbf{CP}}^2$, S²${\mathbf{S}}^2$ and the 0-dimensional space consisting of a single point {0}$\{0\}$.     

基于类salen配体的二苯基锡配合物的合成、抗肿瘤活性及其与DNA相互作用

利用类salen配体二苯乙二酮苯甲酰腙或二苯乙二酮水杨酰腙与二苯基二氯化锡反应,合成了2个二苯基锡配合物[(C_6H_5(O)C=N—N=C(Ph)—(Ph)C=N—N=C(O)—C_6H_5)_2SnPh_2(CH_3OH)]·3CH_3OH (1)和 [(o-OH—C_6H_4(O)C=N—N=C(Ph)—(Ph)C=N—N=C(O)—(o-OH—C_6H_4))_2SnPh_2(CH_3OH)]·CH_3OH (2),通过IR、~1H NMR、~(13)C NMR、~(119)Sn NMR、元素分析、HRMS 以及X射线单晶衍射等表征了配合物结构。测试了配合物1、2的热稳定性及其对癌细胞的体外抑制活性,发现配合物2对癌细胞NCIH460、HepG2、MCF7表现出略优的抑制活性。利用紫外可见吸收光谱、荧光猝灭光谱研究了配合物2与ct-DNA之间的相互作用,结果表明配合物以嵌入模式与DNA结合。