Beam quality in a turbulent mixing medium

A criterion for evaluating beam quality is discussed.By dividing the mediumdisturbances into the ordered and random part, introducing the time-averaged variance ofphase distortion and fitting the wavefront with Zernike polynomials,a simplified formula forevaluating beam quality in a turbulent mixing medium is derived.     

储存环光学速调管自发辐射模拟研究

用蒙特卡洛方法模拟了合肥储存环上ＴＯＫ的自发辐射，通过模拟结果分析和讨论了电子束团能散和发射度对自发辐射谱的作用，并和实验结果进行了比较，分析了实验测出的自发辐射谱调制因子很低的原因。     

La-Fe基NaZn13型化合物的磁场诱导熵变研究

围绕具有一级磁性相变的La-Fe基NaZn13型化合物的磁场诱导熵变研究,从室温磁制冷目的出发讨论了材料研究和熵变机制。La-Fe-Si在190K附近5T磁场下的熵变值可达29J.kg-1.K-1。用少量Co替代Fe,可以获得室温附近5T磁场下熵变为15J.kg-1.K-1的大熵变材料。这类材料中的熵变主要由磁有序熵变和晶格熵变组成。分析了一级磁性相变体系中磁有序熵变和晶格熵变对总熵变的贡献,并发现大的熵变来源于被晶格贡献抵消后的磁有序熵变。     

条纹相机系统在激光脉冲整形测量中的应用

针对采用脉冲堆积法进行激光脉冲整形后获取的宏脉冲,介绍了基于条纹相机观测其纵向分布的基本原理。阐述了测量系统中的硬件配置功能以及脉冲堆积原理,并描述了使用条纹相机专用软件测量激光脉冲的详细步骤和操作界面。研究了测量系统中时序控制的调试对观测脉冲堆积后的宏脉冲的影响并给出了测量结果和测量误差分析。结果表明:采用脉冲堆积法所获得的激光脉冲整形效果非常理想,整形前激光脉冲的半高全宽值约为3.82 ps,整形后约为15.3 ps,且平顶部分的脉宽为11.5 ps,上升沿和下降沿均为1.9 ps。     

狭缝法合肥光源高亮度注入器发射度测量系统

为了测量受空间电荷效应支配的发射度,合肥光源高亮度注入器采用了狭缝法进行测量,研究了基于狭缝法发射度测量系统的构成,并以实例比较了单狭缝和多狭缝在发射度测量系统中的应用。两种测量方法的结果表明:单狭缝法测量的结果更接近于模拟计算值,可有效避免子束团之间的重叠,适用范围更广。实验结果表明:在240 pC电荷量情况下,合肥光源高亮度注入器仍然具有较小的归一化发射度,为（1.840.085） mmmrad。     

Rapid quantification and characterization of soyasaponins by high-performance liquid chromatography coupled with electrospray mass spectrometry

A method using high-performance liquid chromatography (HPLC) with electrospray ionization mass spectrometry (ESI-MS) in the negative mode is presented for the quantification and characterization of different soyasaponins using six authentic soyasaponin standards. This method was successfully applied to the rapid separation of diverse soyasaponins, more than 50, including soyasaponins A in different degrees of acetylation, and soyasaponins B in both their 2,3-dihydro-2,5-dihydroxy-6-methyl-4H-pyran-4-one (DDMP)-conjugated and non-conjugated forms in different samples in one single run for only 30 min. Standard calibration curve was linear over the concentration range of 0.010-1.0 mg/L for each soyasaponin. Within-day and day-to-day relative standard deviations were less than 9.2 and 13.1%, respectively.     

合肥光源数字横向逐束团反馈系统

为了克服横向耦合束团不稳定性对合肥光源的不利影响,在合肥光源(HLS)研制了一套数字横向逐束团反馈系统。该系统使用直接采样前端,同时针对合肥光源水平方向工作点和垂直方向工作点太过接近的情况,修改了数字处理器的FPGA程序,使得单个处理器能够实现独立的双通道反馈。束流试验验证了反馈系统能有效抑制横向不稳定性,并可以提高注入流强。     

碳氢表面活性剂在超临界CO2中形成微乳液的研究进展

在超临界CO₂中形成微乳液可以克服CO₂对高分子量和亲水性物质溶解能力差的缺点。碳氢表面活性剂成本低,对环境友好,利用碳氢表面活性剂形成超临界CO₂微乳液有利于工业应用,但绝大部分碳氢表面活性剂不能形成微乳液,所以需要对碳氢表面活性剂进行选择和设计。本文介绍了微乳液的形成、表征和评价,从表面活性剂的亲CO₂性能和界面活性两方面,综述了碳氢表面活性剂的设计思想和进展。另外介绍了助表面活性剂对形成超临界CO₂微乳液的作用,并对常规碳氢表面活性剂在助表面活性剂的作用下形成超临界CO₂微乳液的体系进行了综述。最后,介绍了含碳氢表面活性剂的混合表面活性剂在形成超临界CO₂微乳液方面的研究情况。     

合肥光源单束团下束团长度和能散的测量

 根据同步光与储存环中的束流信号具有相同的时间结构的原理,测量同步光脉冲的半高全宽值可以计算出束团的长度。根据合肥光源的特点和实际需要,选择快速光电接收器搭配高速高带宽示波器作为在线测量束团长度和纵向分布等的主要手段。对单束团模式下束团长度随流强和高频腔腔压的变化趋势进行了测量。测量结果表明：束团长度与腔压的0.3次方成反比,比理论值0.5小;而束团长度随流强的增长率为2.0 ps/mA。通过测量纵向量子寿命进行了能散随流强变化的间接测量,结果表明,束团的拉伸是能散变化和势阱效应共同作用的结果。     

A Structural,Magnetic and Mössbauer Study of Tb0.3Dy0.7(Fe1−x Al x )1.95 Alloys

A structural, magnetic and Mössbauer study of a series of Tb_0.3Dy_0.7(Fe_1–x Al _x )_1.95 alloys (x=0, 0.05, 0.1, 0.15, 0.20, 0.25, 0.30, 0.35) at room temperature is presented. It was found that the primary phase of the Tb_0.3Dy_0.7(Fe_1–x Al _x )_1.95 alloys is the MgCu₂-type cubic Laves phase structure when x<0.3 and a small amount of a second phase, RFe₃ (R: rare-earth element), is present when 0.3x0.35. The lattice constant of the Tb_0.3Dy_0.7(Fe_1–x Al _x )_1.95 alloys increases approximately monotonically with increasing x. The substitution of Al increases slightly the magnetostriction in a low magnetic field (H500 Oe). However, the magnetostriction decreases sharply, but is saturated more easily with increasing x in a higher applied field. The analysis of the Mössbauer spectra allows the determination of the easy axes of magnetization in these alloys. Moreover, the dependence of the hyperfine-field, isomer shift and quadrupole splitting on the Al concentration, x, for the Tb_0.3Dy_0.7(Fe_1–x Al _x )_1.95 alloys are reported and discussed.