Thermal behavior of double salt schoenite

The thermal behavior of synthetic schoenite (K₂SO₄·MgSO₄·6H₂)) during heating has been studied by thermal methods. The temperatures of dehydration and decomposition of schoenite have also been determined by DTA, TG and DSC. The thermal reaction equations and the X-ray power diffraction results of the products have been given and the corresponding kinetic parameters have also been obtained.     

Zn∶Er∶LiNbO_3单晶的坩埚下降法生长及光谱特性

报道了Zn∶Er∶LiNbO3单晶的坩埚下降法生长工艺。通过控制晶体生长固液界面的温度梯度(30~35℃.cm-1)、晶体的生长速度(0.8~1.5 mm.h-1)、密闭Pt坩埚等条件生长了宏观无缺陷的Zn2+(3%)和Er3+(0.6%)共掺的LiNbO3单晶。用X射线衍射(XRD)和差热分析(DTA)表征了获得的晶体,并测量了晶体不同部位的吸收光谱和荧光谱。从吸收光谱以及由XRD数据计算所得的晶胞参数推断,沿生长方向Er3+在晶体中的浓度分布逐步减少。光谱数据表明,晶体底部样品的吸收强度和荧光强度要比顶部大,而对应于Er3+上能级4S3/2和2H11/2跃迁至基态4I15/2的绿光发射,晶体底部却比顶部表现出更高的上转换效率。从晶体的内部结构、缺陷情况以及Er3+的分凝现象解释了产生上述现象的内在机制。     

偶氮氯膦mk催化动力学光度法测定痕量铱(Ⅳ)

实验发现,在硫酸介质中,Ir(Ⅳ)对KBrO3氧化偶氮氯膦mk的反应具有催化作用,据此建立了测定痕量铱(Ⅳ)的催化光度法。方法测定铱(Ⅳ)的线性范围为0.2~1.2μg/25mL,检出限为6.88×10-10g/mL。拟定的方法已用于冶金产品和岩矿中痕量铱(Ⅳ)的测定,分析结果满意。     

盐卤硼酸盐化学(非汉字字符)——MgO·nB_2O_3-18%MgCl_2-H_2O过饱和溶液20℃结晶动力学

用结晶动力学方法对不同摩尔比的 Mg O/B2 O3在摩尔分数为 1 8% Mg Cl2 -H2 O中的过饱和溶液在2 0℃的结晶动力学过程进行了研究 .n(Mg O) /n(B2 O3) =1 /1和 1 /1 .5时分别结晶析出 2 Mg O· 2 B2 O3·Mg Cl2 · 1 4H2 O和 2 Mg O· 3 B2 O3· 1 5 H2 O(多水硼镁石 ) .n(Mg O) /n(B2 O3) =1 /2时依次结晶析出 Mg O·3 B2 O3· 7.5 H2 O,Mg O· 2 B2 O3· 9H2 O和 2 Mg O· 3 B2 O3· 1 5 H2 O(多水硼镁石 ) 3种固相 .n(Mg O) /n(B2 O3)=1 /3时结晶析出不同结晶水的六硼酸镁 Mg O· 3 B2 O3· 7H2 O和 Mg O· 3 B2 O3· 7.5 H2 O.析出固相采用X射线粉末衍射、红外光谱和热分析进行物相鉴定 .拟合并给出结晶动力学方程 ,同时对水合镁硼酸盐的结晶反应机理进行了探讨     

烷基和烷基苯磺酸钠系列的反相高效液相色谱法

用移动相中含有磷酸二氢钠的反相高效液相色谱法分析了烷基磺酸钠和烷基苯磺酸钠。对前者用电导检测器直接进行检测(无抑制柱),后者用紫外检测器检测。对几种商品十二烷基苯磺酸钠的组分和微乳液中十二烷基磺酸钠的含量进行了测定。得到了满意的结果。     

Synthesis of Obyanamide, a Marine Cytotoxic Cyclic Depsipeptide

Obyanamide 1 is a cyclic depsipeptide that was recently isolated from the marine cyanobacterium Lyngbya confervoides by Moore and co-workers1. This compound displayed a potent inhibitory effect on both KB and LoVo cells in vitro. Several structural analog…     

Determination of Organophosphorus Pesticides in Soil by MMSPD-GC-NPD and Confirmation by GC-MS

A novel method, modified matrix solid-phase dispersion (MMSPD), has been developed for quantitative analysis of organophosphorus pesticide residues in soil. It was based on matrix solid-phase dispersion (MSPD) and continuous liquid-solid extraction (continuous LSE), using Florisil as sorbent and dichloromethane as the recycling solvent. Two soils with different texture and physicochemical properties were studied to validate the method. The effect of residence time of pesticides in soil was also studied. MMSPD was compared with MSPD and continuous LSE respectively. Determination was carried out by gas chromatography with nitrogen-phosphorus detection (GC-NPD). The method gave recoveries ranging from 72–105% with relative standard deviations (RSDs) lower than 15% for the pesticides studied. The limits of detection (LODs) ranged from 0.1 to 0.6 ng g⁻¹. Two pesticide residues have been detected in real soil samples from Fujian, China, using MMSPD. The pesticides were confirmed by gas chromatography-mass spectrometry (GC-MS) in a selected-ion monitoring (SIM) mode. Revised: 4 and 9 April 2006     

EFFECT OF HOT STRETCHING ON THE STRUCTURE OF POLYIMIDE FROM 1,4--BIS (3'''', 4''''--DICARBOXYPHENOXY) BENZENE AND 4,4''''-OXYDIANILINE

The structure of polyimide from 1,4-bis (3', 4'-dicarboxyphenoxy) benzene and 4,4'-oxydianiline film specimens before and after hot stretching has been investigated by WAXD, DSC and FTIR. As evidenced by both the WAXD and DSC results, it could be believed that strain induced crystallization did take place after hot stretching. Meanwhile, shifting position and splitting of some band peaks existed on the FTIR spectrograms were explained in terms of the close packing of chains and the changes of inter-molecular charge-transfer interaction between imide groups and aromatic groups upon crystallization.     

Highly visible-light luminescence properties of the carboxyl-functionalized short and ultrashort MWNTs

Luminescence of the short multiwalled carbon nanotubes (MWNTs) conjugated with carboxylic acid groups has been studied. The results show that the carboxyl-functionalized short MWNTs could emit luminescence and the emission peak appears at 500 nm with a corresponding optimal excitation wavelength centering at 310 nm. When the short MWNTs are filtered through 0.15 μm polytetrafluoroethylene (PTFE) membrane, the ultrashort MWNTs are obtained from the filtrate. An interesting feature for the ultrashort MWNTs is that the emission intensity is strengthened and the peak is slightly blue shifted to 460 nm. This result indicates that the luminescence properties of MWNTs are strongly affected by the tube length. After chemical oxidization cutting, defects and carboxylic acid groups at the tube end and/or sidewall can be produced; the more shorten of MWNTs, the better dispersion and carboxylic passivation of the nanotubes, and the more intense luminescence emissions. The broad emissions are logically attributed to the trapping of excitation energy by defect sites in the carboxyl-functionalized nanotube structure.     

In-channel indirect amperometric detection of nonelectroactive anions for electrophoresis on a poly(dimethylsiloxane) microchip

In the present paper, we describe a microfluidics-based sensing system for nonelectroactive anions under negative separation electric field by mounting a single carbon fiber disk working electrode (WE) in the end part of a poly(dimethylsiloxane) microchannel. In contrast to work in a positive separation electric field described in our previous paper (Anal. Chem. 2004, 76, 6902-6907), here the electrochemical reduction reaction at the WE is not coupled with the separation high-voltage (HV) system, whereas the electrochemical oxidation reaction at the WE is coupled with the separation HV system. The electroactive indicator is the carbon fiber WE itself but not dissolved oxygen. This provides a convenient and sensitive means for the determination of nonelectroactive anions by amperometry. The influences of separation voltage, detection potential, and the distance between the WE and the separation channel outlet on the response of the detector have been investigated. The present detection mode is successfully used to electrochemically detect F-, Cl-, SO4(2-), CH3COO-, H2PO4-. Based on the preliminary results, a detection limit of 2 microM and a dynamic range up to three orders of magnitude for Cl- could be achieved.