Tuning Chemical and Physical Properties of Phosphorus Corroles for Advanced Applications

Although the affinity of metallocorroles to axial ligands is quite low, this is not the case when the chelated element is phosphorus. This work is hence focused on the mechanism of ligand exchange of six-coordinate phosphorus corroles as a tool for affecting their chemical and physical properties. These fundamental investigations allowed for the development of facile methodologies for the synthesis of a large series of complexes and the establishment of several new structure/activity profiles that may be used to understand and predict spectroscopic features and for tailor-made modification of photophysical and electrochemical properties. This is exemplified by the facile access to complexes with terminal groups that are of large potential for practical applications based on click chemistry, optical imaging, and surface science.     

In Situ Anchoring of Pyrrhotite on Graphitic Carbon Nitride Nanosheet for Efficient Immobilization of Uranium

Enrichment of U^VI is an urgent project for nuclear energy development. Herein, magnetic graphitic carbon nitride nanosheets were successfully prepared by in situ anchoring of pyrrhotite (Fe₇S₈) on the graphitic carbon nitride nanosheet (CNNS), which were used for capturing U^VI. The structural characterizations of Fe₇S₈/CNNS-1 indicated that the CNNS could prevent the aggregation of Fe₇S₈ and the saturation magnetization was 4.69 emu g⁻¹, which meant that it was easy to separate the adsorbent from the solution. Adsorption experiments were performed to investigate the sorption properties. The results disclosed that the sorption data conformed to the Langmuir isotherm model with the maximum adsorption capacity of 572.78 mg g⁻¹ at 298 K. The results of X-ray photoelectron spectroscopy (XPS) demonstrated that the main adsorption mechanism are as follows: U^VI is adsorbed on the surface of Fe₇S₈/CNNS-1 through surface complexation initially, then it was reduced to insoluble U^IV. Thereby, this work provided an efficient and easy to handle sorbent material for extraction of U^VI.     

A facile and efficient method for synthesis of β-iodocarboxylates from terminal epoxides

A facile and efficient method has been developed for synthesis of β-iodocarboxylates in the presences of Ph₃P/I₂. Starting from epoxides, a series of β-iodocarboxylate compounds can be directly obtained in toluene media with excellent yields. Moreover, the method was successfully applied for the late-stage modification of natural products, such as isosteviol and vincamine derivatives, achieving the corresponding β-iodocarboxylates in good yields.     

蓝宝石衬底材料的研究及应用进展

蓝宝石因为其生产技术成熟、稳定性好、性价比高而被广泛应用于光电领域,成为GaN基光电器件的主要衬底材料.传统的蓝宝石衬底生长GaN薄膜存在许多问题,如由晶格常数不同产生的晶格失配、热应力失配等,且GaN薄膜结晶质量较差、光线提取效率低.介绍了图形化蓝宝石衬底技术在制作GaN基LED器件中的应用,比较了几种图形化衬底对LED的发光性能的影响.在图形化蓝宝石衬底上采用PVD法生长AlN薄膜,可以降低GaN薄膜的螺旋位错和刃位错、提高MOCVD生长效率、显著提高设备利用率.另外,介绍了蓝宝石衬底在SOS领域的应用,列出了SOS工艺对蓝宝石衬底的具体要求.蓝宝石作为一种重要的衬底材料,未来的发展前景会更加广阔.     

改性二氧化硅纳米颗粒提高二氧化碳泡沫稳定性的研究

通过纳米二氧化硅的硅烷化改性, 使其在高矿化度盐水中可以稳定存在的前提下, 研究了改性纳米颗粒与阳离子表面活性剂十二烷基三甲基氯化铵混合体系的溶液稳定性及协同稳定CO₂泡沫的效果. 研究结果表明, 无机盐离子对改性纳米颗粒与阳离子表面活性剂间的静电吸引力具有屏蔽作用, 且矿化度越高, 屏蔽效果越明显, 从而混合溶液更易于在高盐水中稳定; 纳米颗粒表面的活性剂吸附层受二者浓度的影响, 进而影响了颗粒的亲/疏水性; 当混合体系中的表面活性剂浓度低于临界胶束浓度(CMC)时, 混合溶液与CO₂的界面张力高于单独活性剂溶液, 而当活性剂浓度高于CMC时, 对CO₂-溶液界面张力几乎无影响, 最低界面张力可降至6 mN/m左右; 改性纳米颗粒的加入可以进一步提高CO₂体相泡沫半衰期一倍以上, 但受二者浓度比例的影响; 纳米颗粒的加入有效提高了多孔介质中泡沫的表观黏度, 最大增幅由20 mPa·s增至55 mPa·s左右, 泡沫黏度增加接近3倍, 增强了CO₂泡沫驱的封堵作用.     

Synthesis,properties and mechanism of photodegradation of core–shell structured upconversion luminescent NaYF4:Yb3+,Er3+@BiOCl

Microspherical bismuth oxychloride (BiOCl) can only utilize ultraviolet (UV) light to promote photocatalytic reactions. To overcome this limitation, a uniform and thin BiOCl nanosheet was synthesized with a particle size of about 200 nm. As results of UV–visible diffuse reflectance spectroscopy showed, the band gap of this nanostructure was reduced to 2.78 eV, indicating that the BiOCl nanosheet could absorb and utilize visible light. Furthermore, the upconversion material NaYF₄ doped with rare earth ions Yb³⁺ and Er³⁺ emitted visible light at 410 nm following excitation with near‐infrared (NIR) light (980 nm), which could be utilized by BiOCl to produce a photocatalytic reaction. To produce a high‐efficiency photocatalyst (NaYF₄:Yb³⁺,Er³⁺@BiOCl), BiOCl‐loaded NaYF₄:Yb³⁺,Er³⁺ was successfully synthesized via a simple two‐step hydrothermal method. The as‐synthesized material was confirmed using X‐ray diffraction, scanning electron microscopy, X‐ray photoelectron spectroscopy as well as other characterizations. The removal ratio of methylene blue by NaYF₄:Yb³⁺,Er³⁺@BiOCl was much higher than that of BiOCl alone. Recycling experiments verified the stability of NaYF₄:Yb³⁺,Er³⁺@BiOCl, which demonstrated excellent adsorption, strong visible‐light absorption and high electron–hole separation efficiency. Such properties are expected to be useful in practical applications, and a further understanding of the NIR‐light‐responsive photocatalytic mechanism of this new catalytic material would be conducive to improving its structural design and function.     

Complete Embedded Self-Translating Surfaces Under Mean Curvature Flow

We describe a construction of complete embedded self-translating surfaces under mean curvature flow by desingularizing the intersection of a finite family of grim reapers in general position.