层层自组装制备基于多壁碳纳米管的胆碱生物传感器

以经混酸处理的多壁碳纳米管(MWCNTs)修饰铂(Pt)电极,在此基础上固定(PAA/PVS)3复合膜,采用层层自组装技术将高分子聚电解质PDDA与胆碱氧化酶交替组装在已修饰的电极上,构建了电流型胆碱生物传感器。实验结果表明,MWCNTs的引入使电极对H2O2的催化电流明显增大,制成的酶电极可以有效控制酶量的使用,酶膜组装层数为8时最优,对胆碱的线性响应范围为5×10-7～1×10-4mol/L;灵敏度为12.53μA/mmol;响应时间为7.60s;检出限为2×10-7mol/L(S/N=3)。传感器的抗干扰能力强,稳定性好,30d时的响应电流值仍保持最初的89.5%。3次平行实验的RSD为3.64%。     

柱切换高效液相色谱法测定人血浆中布洛芬对映体浓度

建立了柱切换高效液相色谱法测定人血浆中布洛芬对映体浓度的方法。以对溴苯甲酸为内标,样品经醋酸钠缓冲液酸化后,用V(正己烷)∶V(异丙醇)=95∶5萃取。以Chiralcel OJ-H柱(Daicel Chemicals,250mm×4.6mm,5μm)为分析柱,UltimateTM SiO柱(50mm×4.6mm,5μm)为预处理柱;流动相为V(正己烷)∶V(异丙醇)∶V(三氟醋酸)=96.5∶3.5∶0.1,流速为0.5mL/min;预处理流动相为V(正己烷)∶V(异丙醇)=99.5∶1,流速为1mL/min;柱切换时间为1.70~4.09min;紫外检测波长为230nm。布洛芬消旋体和S-( )-布洛芬标准曲线线性范围分别为0.21~20mg/L和0.10~10mg/L;日内RSD小于6.5%,日间RSD小于6.1%;方法回收率为93.3%~107.1%,萃取回收率为80.0%~86.6%。本法简便、准确,重现性好,可用于布洛芬对映体人体药代动力学研究。     

Zn(Ⅱ)/γ-MnOOH体系化学吸附的密度泛函理论研究

采用密度泛函B3LYP方法对Zn(Ⅱ)在水锰矿(MnOOH)2(H2O)6簇模型表面的水合、一级和二级水解三类共11种吸附构型进行了理论研究. 计算结果表明, 水合吸附构型的稳定性顺序为DC(双角)>SE-B(单边-B)>SE-A(单边-A)>DE(双边), 水解吸附构型的稳定性顺序为DC>SE-A>SE-B>DE, 均符合鲍林第三规则; 热化学分析结果说明, 其吸附和水解是相互制约的两个过程, 这一结论通过前线轨道理论分析得到了证明; 自然布居分析结果表明, 吸附过程中电子由簇模型向吸附质迁移; 结合电子供体-受体相互作用和前线轨道组成分析了吸附产物的稳定性.     

Synthesis and Molecular Structure of 3-（p-Methoxyphenyl）-4-hydroxymethyl-6-bromo- 7-hydroxycoumarin Co-crystallized with Methanol

The title compound, C18H17BrO6 （Mr = 409.23）, was synthesized as angiogenesis inhibitor and structurally characterized by ^1H-NMR, ^13C-NMR, MS, elemental analysis and X-ray single-crystal diffraction. Structure analysis indicates that the title compound is of triclinic, space group P1^-, with a = 8.100（3）, b = 10.536（4）, c = 11.689（5）A, a = 67.405（7）, βl = 69.736（3）, γ = 88.510（5）°, V = 857.3（5） A^3, Z = 2, Dc = 1.585 g/cm^3, μ = 2.429 mm^-1, F（000） = 416, the finial R = 0.0356 and wR = 0.0929 for 2541 observed reflections. The bond lengths of C（7）-C（16） proved that the title compound possesses coumarin rather than flavone scaffold.     

二氧化碳与环氧化合物合成环状碳酸酯的研究进展

二氧化碳作为温室气体和储量大、无毒且可循环利用的碳资源,其化学利用受到了人们的广泛关注. 二氧化碳与环氧化合物通过环加成反应制备环状碳酸酯是二氧化碳化学法利用最为有效的途径之一. 本文综述了近年来该反应的研究进展,讨论了催化剂作用下的反应机理.     

A novel morphology of aragonite and an abnormal polymorph transformation from calcite to aragonite with PAM and CTAB as additives

The abnormal structure conversion of CaCO3 from calcite to aragonite was investigated with a mixture of polyacrylamide (PAM) and cetyltrimethylammonium bromide (CTAB) as additives by a hydrothermal method. A novel morphology of aragonite, "magnified" cubic shape, was observed. In order to investigate the effects of PAM and experimental temperature on the morphology and phase of CaCO3, the samples were synthesized without any additives and with PAM as template at 90 and 120 degrees C, respectively. The results indicate that both the interaction between the mixed template and the CaCO3 and the elevated experiment temperature play important roles in the process of polymorph transformation.     

An Efficient synthesis of pyrimido[4,5‐b]quinoline and indeno[2′,1′:5,6]pyrido[2,3‐d]pyrimidine derivatives via multicomponent reactions in ionic liquid

A series of pyrimido[4,5‐b]quinoline and indeno[2′,1′:5,6]pyrido[2,3‐d]pyrimidine derivatives were synthesized via the three‐component reaction of an aldehyde, 6‐aminopyrimidine‐2,4‐dione and 5,5‐dimethyl‐1,3‐cyclohexanedione or 1,3‐indanedione in ionic liquid 1‐n‐butyl‐3‐methylimidazolium bromide ([bmim]Br). This protocol has the advantages of easier work‐up, milder reaction conditions, high yields and an environmentally benign procedure compared with other methods.     

Static droplet array for the synthesis of nonspherical microparticles

We reported a manually operated static droplet array (SDA)-based device for the synthesis of nonspherical microparticles with different shapes. The improved SDA structure and reversible bonding between poly(dimethylsiloxane) (PDMS) were used in the device for the large-scale synthesis and rapid extraction of nonspherical microparticles. To understand the device physics, the effects of flow rate, SDA well size, and shape on droplet generation performances were explored. The results indicated that droplet generation in SDA structures was insensitive to the flow rate, and monodisperse droplets were generated by the SDA-based device through manually pushing the syringe. Finally, we integrated four kinds of SDA structures in one device and successfully realized the synthesis and extraction of nonspherical microparticles with different shapes and materials. Our SDA-based device offers numerous advantages, such as simple manual operation, low equipment cost, controllable microparticle shapes and sizes, and large-scale production. Thus, it holds the potential to be used as a flexible tool for the production of nonspherical microparticles.     

基于结构虚拟筛选发现蛋白质精氨酸甲基转移酶5抑制剂

蛋白质精氨酸甲基转移酶5(PRMT5)是蛋白质甲基转移酶家族(PRMTs)的重要一员,其主要生理功能是催化精氨酸单对称二甲基化。PRMT5的上调发生在不同类型的肿瘤中,并与不良预后密切相关,已被视为肿瘤治疗中的潜在靶点。近年来,已有多种PRMT5抑制剂进入临床试验,但目前尚未有药物获批上市。本研究基于Glide对接的虚拟筛选和生物活性实验,发现化合物8018-1271对PRMT5酶的抑制活性IC₅₀值为13.56±0.86μmol/L,并通过分子动力学揭示其与PRMT5蛋白结构域的相互作用模式。本研究所得化合物8018-1271可作为进一步改造的先导化合物,为新型PRMT5抑制剂的发现提供参考。     

基于羧基化聚吡咯-氯化血红素和点触发链置换反应信号放大的电化学生物传感器检测转基因作物中CaMV35S序列

为适应快速增长的转基因生物(GMOs)安全评价与管理的需求,高效、可靠的转基因检测技术研究与应用的重要性日益凸显。该文采用一步法合成了羧基化聚吡咯(cPPy)与氯化血红素(Hemin)的纳米复合物(cPPy-hemin),并以其为信号标签合成了一种DNA双链结构功能化的纳米信标(DNA-cPPy-hemin)。利用cPPy-hemin增强的模拟酶催化活性,结合点触发链置换反应(TSDR)信号放大策略,制备了一种新型电化学基因传感器用于转基因成分的灵敏检测。通过信号探针(Ps)与模板链(Ts)、辅助链(As)结合形成DNA双链体结构中的-NH2功能化cPPy-hemin,制备Ts/As/Ps-cPPy-hemin双链DNA结构的纳米信标。在目标花椰菜花叶病毒35S启动子(CaMV35S)序列和燃料链(Fs)存在下,TSDR过程释放出的Ps-cPPy-hemin与固定在电化学沉积金纳米粒子修饰GCE表面上巯基化的DNA捕获探针(Cs)相结合,利用cPPy-hemin对H₂O₂的模拟酶催化产生的电信号,可实现对CaMV35S的定量检测。在最优条件下...