金属目标原子晶格结构对其量子雷达散射截面的影响

量子雷达散射截面是描述光量子态照射下目标可见性的重要参数. 本文对量子雷达散射截面的推导进行了扩展, 使其可以应用于非平面凸目标的QRCS计算. 针对面心立方、体心立方以及密排六方三种金属原子晶格所构成的目标的量子雷达散射截面进行了计算, 结果表明不同的原子排列方式下, 目标QRCS主瓣基本不变, 而量子旁瓣在原子排列稀疏的目标中更为明显.     

光学薄膜诱导偏振像差对大数值孔径光学系统聚焦特性的影响

大数值孔径光学系统表面光线的入射角较大, 会导致薄膜的偏振分离, 诱发偏振像差, 影响光学系统的聚焦特性. 本文利用矢量光衍射理论, 建立了光学薄膜各参量与光学系统聚焦光场的模型. 利用该模型分析了线偏振光入射时, 光学薄膜对光学系统聚焦光斑的扰动. 在此基础上, 探讨了应用了不同约束条件下得到的光学薄膜对最终聚焦光场的影响, 确定了减小薄膜扰动光学系统光斑的设计方法, 即额外添加透射率差和位相差的约束条件, 并且适当增加位相差约束的权重. 利用该方法优化设计的薄膜, 相比于普通减反膜而言, 对系统聚焦光场中心强度的提升可达约12.5%.     

基于激光诱导叶绿素荧光寿命成像技术的植物荧光特性研究

针对植物荧光遥感探测中信号易受干扰的问题, 提出了一种用于评估植物生长状况及环境监测的荧光寿命成像技术. 采用凹透镜对355 nm波长的激光扩束, 再照射植物激发叶绿素荧光, 由增强型电荷耦合器件接收荧光信号. 采用时间分辨测量法, 连续用相同激光脉冲照射植物以激发相同的荧光信号, 同时不断改变激光脉冲触发探测器启动的延时时间, 从而能够得到完整的离散荧光信号分布图像. 对植物特定位置点产生的离散荧光信号进行拟合, 再运用一种改进型的迭代解卷积法可反演高精度的荧光寿命; 进而反演图像各点的荧光寿命以生成植物的荧光寿命分布图. 该方法所绘制的荧光寿命图比荧光强度图能更准确地反映植物内部的叶绿素含量, 并对活体植物叶绿素荧光寿命的物理特性进行了初步研究, 证明叶绿素荧光寿命与植物生理状态存在一定关联; 并且叶绿素荧光寿命与活体植物所处环境存在着复杂的关系. 未来将与生物物理学家们合作, 继续探寻叶绿素荧光寿命与植物生存环境的关系.     

On exponential stability of nonlinear Volterra difference equations in phase spaces

Using a novel approach, we present some new explicit criteria for global exponential stability of the zero solution of general nonlinear Volterra difference equations in phase spaces. In particular, this gives a solution to an open problem posed very recently by E. Braverman and I. M. Karabash in Journal of Difference Equations and Applications 18 , 909–939 (2012). As an application, we apply the obtained results to study asymptotic behavior of equilibriums of discrete time neural networks.     

变压器温升和异常状态试验的自动测量与控制系统

国内附件类产品的自动化检测水平不高,对于变压器产品认证,传统人工测试方式采样速度难以达到规定要求,造成数据后期计算和处理难、误差率高、在线时间长、测试效率低下等问题;针对GB19212.1(IEC61558-1)标准关于电子电力类变压器产品中温升和异常状态型式试验项目的要求,研究开发了一套智能自动化测量与控制系统,采用以软件为核心的模块化架构,配合研制出的集成控制模块组,通过用户自定义需求,可完成包括试验设备控制、数据分析、实时监测、定时采集与算法处理、试验方案保存与原始记录生成等一系列功能,真正实现了变压器测试的“试前一次配置,全流程自动化”的试验过程;试验结果表明,该系统的应用可大幅降低人工测量环节的不确定度、提高测试结果准确率,并有效地保证了试验可复制性、结果一致性和可追溯性。     

Synthesis of Novel Tricyclic 1,5‐Benzothiazepine Derivatives Bearing Quinoline Moiety via [2 + 2] Cycloaddition Reaction

A series of new tricyclic 1,5‐benzothiazepine derivatives were synthesized by the reaction of 1,5‐benzothiazepine containing 2‐phenoxy‐quinoline with chloracetyl chloride and phenoxyacetyl chloride. The structures of the target compounds were confirmed by IR, ¹H NMR MS, and elemental analysis.     

Facile synthesis of platinum nanoparticle-containing porous carbons,and their application to amperometric glucose biosensing

This study describes the facile synthesis of platinum nanoparticle-containing porous carbons (Pt/C) by carbonization of freeze-dried agarose gels containing potassium tetrachloroplatinate under a nitrogen atmosphere at 800 °C. By adjusting the ratio between agarose and platinate in the freeze-dried gels, the Pt content in the final Pt/C products could be systematically varied from 0–10 wt.%. Transmission electron microscopy, inductively coupled plasma atomic emission spectrometry, X-ray photoelectron spectroscopy, Raman spectroscopy, and nitrogen physisorption measurements revealed that the Pt/C materials obtained by this method possess high surface areas (350–500 m² g⁻¹), narrow Pt nanoparticle size distributions (6 ± 3 nm) and nanocrystalline graphite –like carbon character. By immobilization of glucose oxidase on the surface of a 4 wt.% Pt/C electrocatalyst prepared by this route, a very sensitive amperometric glucose biosensor was obtained (response time <2 min, sensitivity 1.9 mA M⁻¹; and a linear response with glucose concentration up to 10 mM). The simplicity and versatility of the described synthetic method suggests its application to the preparation of carbon supported noble metal catalysts including palladium/C and gold/C.

This study describes the facile synthesis of platinum nanoparticle-containing porous carbons (Pt/C) by carbonization of freeze-dried agarose gels containing potassium tetrachloroplatinate. The Pt/C materials exhibited excellent electrocatalytic activities, as demonstrated by their successful integration into amperometric glucose biosensor

     

Profile monitoring of reflow process using approximations of mixture second‐order polynomials

Lately, profile monitoring has received considerable attention in the statistical process control research field. This paper proposes a novel monitoring framework for the reflow process data, which uses two goodness‐of‐fit criteria to select the change points in the mixture polynomial model. Among change points, the mixture second‐order polynomials are utilized to piecewisely approximate the nonlinear profile data of the reflow process. The well‐known Hotelling T² and proposed EWMA₄ control charts are then employed to monitor the parameter estimates. The experimental results demonstrate that the proposed monitoring framework presents better performances in detecting outlying profiles than the conventional methods in phase I. In phase II, the performance of the proposed framework is assessed in terms of the out‐of‐control average run length. Copyright © 2014 John Wiley & Sons, Ltd.     

On the PdCl2-catalyzed synthesis of allylic azides and allylic sulfonamides from homoallylic alcohols

According to experimental and literature data, the one-pot formation of allylic azides or sulfonamides from catalytic amounts of PdCl₂, homoallylic alcohols and TMSN₃ or TsNH₂ occurs through CC migration followed by regioselective nucleophilic addition on the Pd^II-activated CC bond and β-OH elimination.