固载脯氨酸的毛发状纳米粒子的合成及其应用研究

毛发状粒子表面的聚合物链是一个具有一定流动性的动态体系,其负载的催化剂综合了均相和非均相负载催化剂的优点,为手性催化剂的负载和实用化提供了一条新的途径。本文利用Si O2纳米粒子表面修饰制得的功能基,通过表面RAFT聚合,并经过氨基去保护后制得负载脯氨酸的毛发状纳米粒子。通过热重、红外和透射电镜对毛发状二氧化硅纳米粒子的结构进行表征,并将获得的毛发状纳米粒子作为催化剂直接催化不对称Aldol反应。     

改性活性炭对土壤镉的吸附性影响

目的研究3种改性活性炭对菜地、河流底泥、荷花底泥镉吸附性的影响。方法对活性炭进行酸改性、碱改性和氧化改性,采用双硫腙分光光度法测定镉含量。结果对实验土样,最佳活性炭添加量为0.025 g/g。随着初始镉含量的升高,土壤对镉的吸附量不断增大。结论 3种改性活性炭相比普通活性炭对湿地土壤的镉吸附量均有不同程度的提升,荷花底泥中,酸性、氧化改性活性炭相比普通活性炭,吸附效果提高7.7%,8.3%,吸附效果提升显著。     

基于石墨烯和金纳米笼修饰的无标记型微囊藻毒素免疫传感器的研制

利用石墨烯及中空结构的金纳米笼构建了无标记型电化学免疫传感器,并用于微囊藻毒素的检测。利用多元醇还原法合成制备了导电性好、催化性强、生物相容性好的金纳米笼;再利用高分散的石墨烯将其固定于玻碳电极表面,进一步吸附固定微囊藻毒素抗体。在无微囊藻毒素存在时,电化学探针[Fe(CN)6]3!/4!在传感器界面上能获得较高的电流响应信号。当培育了微囊藻毒素后,抗体与微囊藻毒素形成免疫结合物,增加了电极表面的电荷密度和传质阻力,阻碍[Fe(CN)6]3!/4!扩散到电极表面,导致[Fe(CN)6]3!/4!的电流响应信号明显降低,电流减小的程度间接地与微囊藻毒素的浓度成比例,可实现对微囊藻毒素的检测。实验考察了抗原培育时间,抗体浓度等条件对该传感器响应性能的影响。结果表明,此传感器对微囊藻毒素的线性响应范围为0.05~1000μg/L,检出限为0.017μg/L,优于文献报道。此传感器操作简单,并且具有良好的稳定性,将其用于实际水样中微囊藻毒素的检测,平均加标回收率为94.1%。     

Synthesis and Crystal Structure of a New Pr(Ⅲ)–K(Ⅰ) Heterometallic Oxalate Coordination Polymer

A new 3D heterometallic coordination polymer, namely [K2Pr2(C2O4)4·H2O]n(1), has been successfully synthesized under hydrothermal conditions. X-ray single-crystal diffraction determination reveals that 1 crystallizes in monoclinic system, space group P21/n with a = 12.060(4), b = 8.493(3), c = 15.776(5)(A), β = 93.235(3)°, V = 1613.4(9) 3, Z = 4, Mr = 730.12, Dc = 3.006 Mg/m3, μ = 6.581 mm-1, F(000) = 1368, the final R = 0.0283 and w R = 0.0866 for 2939 observed reflections with I 2σ(I). Complex 1 features an unusual 3D heterometallic coordination framework, in which oxalates exhibit three different coordination behaviours. Moreover, powder X-ray diffraction and thermal properties for 1 have also been investigated.     

介孔SBA-15棒负载的Pd3Cl催化剂催化Sonogashira偶联反应（英文）

通过静电吸引策略将具有高度分散性的原子精确纳米团簇[Pd3Cl(PPh2)2(PPh3)3]+(Pd3Cl)负载在介孔SBA-15棒上。结构明确的Pd3Cl/SBA-15催化剂在以水作为溶剂以及温和的反应条件下对催化Sonogashira碳-碳偶联反应展现了较好的催化性能以及循环性。在此基础上,我们研究了Pd3Cl团簇结构与性能之间的关系,并证实内核的Pdδ+(0<δ<2)与配体之间的协同效应是催化反应的关键。     

Effects of mechanical loadings on the performance of a piezoelectric hetero-junction

A fully-coupled model for a piezoelectric hetero-junction subjected to a pair of stresses is proposed by discarding the depletion layer approximation. The effect of mechanical loadings on PN junction performance is discussed in detail. Numerical examples are carried out for a p-Si/ZnO-n hetero-junction under a pair of stresses acting on the ntype ZnO portion near the PN interface, where ZnO has the piezoelectric property while Si is not. It is found that the bottom of conduction band is lowered/raised near the two loading points due to the decrease/increase in the electron potential energy there induced by a tensile-stress mode via sucking in majority-carriers from two outside regions, which implies appearance of a potential barrier and a potential well near two loading points. Furthermore, the barrier height and well depth gradually become large with increasing tensile stress such that more and more electrons/holes are inhaled in loading region from the n-/p-zone, respectively. Conversely, rising/dropping of conduction band bottom is brought out near the two loading points by a compressive-stress mode due to the increase/decrease in the potential energy of electrons by pumping out the majority-carriers from the loading region to the two outside regions. Therefore, a potential well and a potential barrier are induced near the two loading points, such that more and more electrons/holes are driven away from the loading region to the n-zone/p-zone, respectively, with the increasing compressive stress. These effects are important to tune the carrier recombination rate near the PN interface. Thus, the present study possesses great referential significance to piezotronic devices.     

Snap-through path in a bistable dielectric elastomer actuator

The dielectric elastomer (DE) has attracted significant attention due to its desired features, including large deformation, fast response, and high energy density. However, for a DE actuator (DEA) utilizing a snap-through deformation mode, most existing theoretical models fail to predict its deformation path. This paper develops a new finite element method (FEM) based on the three-parameter Gent-Gent model suitable for capturing strain-stiffening behaviors. The simulation results are verified by experiments, indicating that the FEM can accurately characterize the snap-through path of a DE. The method proposed in this paper provides theoretical guidance and inspiration for designing and applying DEs and bistable electroactive actuators.     

Synthesis and Complexation Properties of Novel Chiral Calix[4]-1,3-aza-crown and Calix[4]arene Hydrazone Derivative

<正>Refluxing calix[4]-1,3-substituted benzaldehyde derivative(4) with glycine hydrazide derivative,we obtained a novel calix[4]arene hydrazone derivative(5) via"1+2"condensation in a yield of 78%.In the reaction of compound 4 with L-leucine hydrazide derivative at room temperature,lariat calix[4]-1,3-aza-crown(6) with chiral amino acid group as branched chain was synthesized via"1+1"addition in a yield of 70%.The preliminary extraction experiments suggested that hosting compounds 5 and 6 possessed good complexation abilities forα-amino acids.     

分布式拉曼光纤放大器动态增益控制研究

介绍了动态增益控制的必要性，对动态拉曼传输方程进行了简化，并将其以矩阵形式表示，从而减少了方程的数量，提高了计算速度。由拉曼传输耦合方程推出一种适用于分布式拉曼放大器实时控制的自动控制算法。考虑工程需要，该算法忽略了噪声功率、泵浦间的受激拉曼效应，以及信号和泵浦间受激拉曼效应对泵浦功率的损耗。结果表明该算法能够达到快速抑制输入信号功率突变引起的输出功率／增益波动的目的。     

在实验室建设中深化近代物理实验教学体系改革

介绍了南开大学物理科学学院近代物理实验室通过“基地”、“211工程”和“世行贷款”等实验室建设,对近代物理实验教学体系进行改革的概况。