An optical surface plasmon resonance biosensor for determination of tetanus toxin

Surface plasmon resonance (SPR) has been successfully applied for the simple, rapid, and label-free assay of various biomolecules. This assay evaluates a novel wavelength modulation SPR biosensor for the detection of tetanus toxin. The wavelength modulation SPR biosensor is designed based on fixing the incident angle of light and measuring the reflected intensities in the resonance wavelength range spanning 400-800 nm simultaneously. Tetanus toxin (TeNT), one of the most potent toxins known, is synthesized as a 150 kDa single polypeptide chain. The SPR biosensor has been shown to be capable of directly detecting concentration of tetanus toxin as low as 0.028 Lf ml⁻¹. Under selected experimental conditions, the SPR biosensor has a good reproducibility, sensitivity and reversibility. The results illustrate how wavelength modulation SPR biosensor can be used to detect biomolecular interactions.     

膜渗透与离子色谱联用技术测定蔬菜中亚硝酸盐和硝酸盐

建立了膜渗析与离子色谱联用技术分析蔬菜等复杂基体中亚硝酸盐和硝酸盐的方法。蔬菜样品经沸水浴后,试样液通过膜渗析除去水溶性大分子杂质和颗粒,直接进入离子色谱分析。渗析池采用0.20μm的醋酸纤维为渗析膜,以水为接收液,分析柱为Metrosep A Supp4-250阴离子交换柱,以1.8mmol/L Na2CO3 1.7mmol/L NaHCO3为流动相,采用化学抑制电导检测。以20g称样计量,方法中NO2-、NO3-的检出限分别为0.075mg/kg和0.105mg/kg;实际样品的加标回收率分别为80.6%~98.7%和90.5%~114%;相对标准偏差(RSD)≤10%。本方法前处理简单,重现性好,准确度高。     

氢化物发生原子荧光光谱法测定铅基合金中砷

建立了以HG-AFS测定铅基合金样品中砷的简单方法,研究了共存元素可能引起的干扰并成功地加以解决,优化了氢化物发生条件及仪器的工作参数。KBH4最优浓度为1.0%(m/V),样品溶液和载流中HCl的最优浓度分别为10%(V/V)和5%(V/V)。实验表明,当硫脲存在时,Cu不干扰As的测定;Sb、Sn和Bi引起的干扰可以通过0.5%(m/V)KMnO4溶液在线吸收相应的氢化物加以消除。通过测定铅基合金标准样品以检验方法的准确性,由标准加入法得到的结果与标准值吻合。本方法的检出限为0.17μg/L,对40μg/LAs标准溶液连续测定11次的相对标准偏差为1.45%。     

层柱催化剂［Zn_2Al（OH）_2］［SiW_（11）O_（39）Co（H_2

层柱催化剂［Ｚｎ_２Ａｌ（ＯＨ）_２］［ＳｉＷ_（１１）Ｏ_（３９）Ｃｏ（Ｈ_２Ｏ）］_（０．８３）４Ｈ_２Ｏ的合成新途径及其对苯甲醛Ｈ_２Ｏ_２氧化的催化活性胡长文，贺庆林，张云峰，张继余，王恩波（东北师范大学化学系，长春１３００２４）关键词层柱催化剂，苯?..     

离子交换色谱法检测离子液体中阴离子

建立了用阴离子交换分离柱、化学抑制模式、电导检测测定系列离子液体中BF-4阴离子及其他杂阴离子(F-、Cl-、Br-)含量的方法,并用于在线监控离子液体合成工艺中阴离子杂质含量.确定淋洗液组成为1.6 mmol/L Na2CO3+3.9 mmol/L NaHCO3,流速为0.6 mL/min.本方法对所测阴离子检出限分别为50 μg/L(F-、Br-)和80 μg/L(BF-4);线性范围在3个数量级以上;r＞0.999;回收率在98%～102%之间.方法用于对离子液体小试工艺样品分析及过程监控时,结果满意,样品的RSD小于2.6%(n＝6).     

光学分析方法在DNA检测中的应用

介绍了用于DNA检测的各种光学分析方法及其原理,主要包括荧光法、化学发光法、光纤传感法、比色法、表面等离子共振法以及其他光学衍生方法。     

手性配体的空间结构与产物对映选择性的关系

首次采用4－烷氧羰基噻唑烷、E唑烷作为手性配体，诱导烷基锌对醛类的亲核加成反应，获得产物是烷基化的醛，最高达90％ee，产率98％的（S）－二级醇。系统地考察了该类手性配体三维空间结构变化与产物对映选择性的关系，当配体4－位烷氧羰基上的R、2－位R′基和环体上原子X发生变化时都会引起产物（S）－二 级醇的对映选择性发生规律性变化。对五种不同结构的底物醛在同一手性配体催化下，诱导烷基锌对醛类的亲核加成反应，底物结构变化也会引起（S）－二级醇对映选择性变化。     

Cyclodextrin Solubilization of the Antibacterial Agents Triclosan and Triclocarban: Effect of Ionization and Polymers

The natural β-cyclodextrin (βCD) and its complexes have limited solubility in aqueous solutions. This low aqueous solubility, as well as low aqueous solubility of the guest molecule (i.e. triclosan or triclocarban (TCC)), can result in low complexation efficiency (CE). The purpose of this study was to enhance the apparent intrinsic solubility (S ₀) of the guest molecule and its βCD complexes through ionization and addition of auxiliary compounds such as polymers, amino acids and metal ions. Both triclosan (pK _a 7.9) and TCC (pK _a 12.7) are weak acids. Addition of ethanol to the complexation medium enhanced S ₀ of both triclosan and TCC but at the same time ethanol lowered the stability constant (K _c ) of their βCD complexes resulting in overall lowering of CE. Addition of small amount of water-soluble polymers enhanced the βCD solubilization of both guests, and addition lysine enhanced the solubilization of TCC. Ionization of triclosan resulted in significant enhancement of CE and enhanced triclosan release from tablets containing triclosan/βCD complex. The effect of ionization was not as pronounced in the case of TCC.This revised version was published online in July 2005 with a corrected issue number.     

A modified internal lock-mass method for calibration of the product ions derived from sustained off-resonance irradiation collision-induced dissociation using a Fourier transform mass spectrometer

A modified internal lock-mass calibration method is introduced for improving the mass measurement accuracy of the product ion spectra derived from sustained off-resonance irradiation collision-induced dissociation (SORI-CID) Fourier transform ion cyclotron resonance (FTICR) mass spectrometry. This method involves an initial external calibration of the Fourier transform mass spectrometer to obtain the initial A- and B-terms for the equation (f(i) = A/(m/z)(i) + B). The A-term is adjusted by using an empirical relationship between the up-shift of the A-term and the pulse-gas duration, whereas the B-term is adjusted by using the mass of the unfragmented precursor ion from the SORI-CID mass spectrum of the unknown sample as internal lock-mass. These adjusted A- and B-terms are then used to provide exact mass SORI-CID calibration for the unknown sample. The modified internal lock-mass method achieved average mass measurement accuracy of approximately 3 ppm which is significantly better than that of the conventional internal lock-mass calibration ( approximately 9 ppm) and is approaching that of the internal calibration ( approximately 2 ppm) and requires no addition of internal calibrant or instrumental modifications.     

Novel hydrogen-bonded three-dimensional network complexes containing cobalt-pyridine-2,6-dicarboxylic acid

The novel complex, Co(H₂O)₅[Co(2,6-pydc)₂] (1) has been prepared in aqueous solution and characterized by single-crystal X-ray diffraction, elemental analyses and i.r. spectra. X-ray structural analysis revealed that three novel compounds each possess both – stacking and hydrogen-bonding interaction three-dimensional (3-D) networks.