解二维和三维抛物型偏微分方程绝对稳定的差分格式

本文研究了二维抛物型偏微分方程的一种三层对称含参数的显式差分格式,用待定系数法选取参数,使得差分方程逼近微分方程具有尽可能高阶的截断误差。一般可达到O(△t~2)+O(△x~2)+O(△y~2)阶,有时还可达到O(△t~2)+O(△t△x~2)+O(△t△y~2)阶的截断误差。我们引入一个关于根和系数关系的定理,利用它证明了这种三层格式是绝对稳定的。文章还给出在三维情况得到的类似结果,而且这些结果能推广到更高维的抛物型偏微分方程。     

5-芳胺-4,7-吲唑二酮的合成

以1,4-对醌、芳肼为原料,通过Aza-Nenitzescu反应、氧化银氧化得到吲唑醌,亲核试剂(各种芳香胺)在Ce3 催化下与吲唑醌发生迈克尔加成反应,得到一系列5-芳氨基基取代的吲唑醌.化合物结构经元素分析、IR及1H NMR证实.初步的生理活性研究表明,这些化合物具有良好的抗哮喘活性.     

5-芳酰氨基-2-苯基-2H-1, 2, 4-噻二唑-3-酮的合成

用1-芳酰基-5-苯基-2-硫代双脲与溴进行氧化成环反应制备了九个新的5-芳酰氨基-2-苯基-2H-1, 2, 4-噻二唑-3-酮, 相应的1-芳酰基-5-苯基-2-硫代双脲可以通过苯基脲与酰基异硫氰酸酯加成制得。     

Mg／Mgl．8La0．2Ni纳米复合材料的吸放氢性能研究

应用高能球磨法制备Mg-x％Mg1.8La0.2Ni（x=10、20和30）纳米复合储氢材料．X射线衍射（XRD）、透射电镜（TEM）和选区电子衍射（SAED）测试表明，该复合材料具有纳米晶和非晶态混合结构的性质，吸氢温度降低，较好的吸放氢动力学性能，在423K，2．5MPa氢压的条件下，50s内即可达到最大吸氢量．     

流动注射区域采样法测定镀锌钝化液中高浓度锌

本文建立了流动注射二甲酚橙光度法测定镀锌纯化液中Ｚｎ￣２＋的自动分析方法。利用区域采样技术和调整管路参数自动完成对样品的上千倍稀释，确定了最佳分析条件并研究了干扰离子的影响及消除办法。所建方法仪器简单，分析速度为８４次／小时，变异系数（Ｚｎ￣２＋１６．０ｇ／Ｌ，ｎ＝２０）为１．Ｏ％，用于实际钝化液分析，相对误差小于±１０％。     

纳米TiO_2膜修饰电极异相电催化还原马来酸

通过电化学合成前驱体和溶胶-凝胶法在Ti表面修饰一层纳米TiO_2膜，SEM， XRD测试表明晶型为锐钛矿型，晶粒平均尺寸为25 nm。采用循环伏安法、循环方波 伏安法和电解合成法研究了纳米TiO_2膜电极在硫酸介质中的氧化还原行为以及对 马来酸（maleic acid）还原的电催化活性。结果表明，纳米TiO_2膜电极在阴极扫 描时有两对可逆氧化还原峰，可逆半波电位E_(1/2)~r分别为-0.53 V和-0.92 V（ sv. SCE，扫描速度0.05 V·s~(-1)），对应于TiO_2/Ti_2O_3和TiO_2/Ti(OH)_3两 个氧化还原电对的可逆电极过程。其中TiO_2/Ti_2O_3电对对马来酸具有异相电催 化还原活性，纳米TiO_2膜中的Ti~(IV)/Ti~(III)氧化还原电对作为媒质间接电还 原马来酸为丁二酸（butane diacid），反应机理为电化学偶联随后化学催化反应 （EC'）机理。     

锌银电池中氧化银电极的光电化学研究

用光电化学方法研究棒状和多孔氧化银电极在阳极极化过程中的光响应规律可以得到许多信息。最大光响应出现在电极表面的AgO被充分地还原为Ag_2O以及Ag结晶即将生成瞬间, 多孔电极和实体电极开路光电位ΔV_(ph,oc)之比有助于对多孔电极孔结构的了解, 首次观测到n-p-n光响应波形的转化。     

单分散二氧化钛超微粒子的制备

以四丁氧基钛为原料，采用溶胶－凝胶法制备了超微二氧化钛粉末．改变热处理气氛、升温速率、水与四丁氧基钛的摩尔比以及溶剂，分别得到７ｎｍ球形单相锐钛矿以及四方形（４０ｎｍ×１０ｎｍ）、球形（４４ｎｍ）的主相金红石超微粒子．     

聚合物{[CuII(Hpb) (mal)]H2O}n :单体的量子化学计算和磁性研究

{[Cu^Ⅱ（Hpb）（mal）]H=O}n （Hpb=2-2＇-pyridylbenzimidazole, mal=maleic acid） is a helical chain-like polymer complex. In order to investigate the electronic structure of the complex, the monomer Cu^Ⅱ（Hpb）（mal） was obturated with different functional groups respectively. For these selective segments, the geometry optimizations were conducted by using hybrid DFT （B3LYP）methods to find that the structure obturated with H2O was better consistent with the experiment, and then this model would be used to latter calculations, such as the frontier molecular orbital and the NBO charge population analysis. In addition the magnetic behaviors of this complex were analyzed by experiments and the weak antiferromagnetic couple between copper（Ⅱ） ions was observed. The exchange coupling constant was calculated by DFT based on the spin broken symmetry formalism. The calculated coupling constants were in good agreement with the experimental data.     

THE DIFFRACTION OF NORMALLY INCIDENT SAW BY ACOUSTIC GRATING

The diffraction phenomena of SAW normally incident on acoustic gratings have been developed.The acoustic grating which is composed of a periodic array of metal film stripes is fabricated on thesurface of Y-cut LiNbO_3 on which the SAWs propagate. Theoretically,the diffraction characteristics of the gratings on which the SAW beam normallyimpinges are analyzed by means of the phenomenological theory.The emphases are laid on twospecial cases,i.e."thin grating"and"thick grating"situations.For the former,the Raman-Nathapproximation is quoted from the theory of acousto-optical diffraction.For the latter,the analyticalexpressions of the diffracted intensities are deduced by using the normal mode theory. Experimentally,two sorts of samples which correspond respectively to"thick grating"and"thingrating"are designed and fabricated.Some interesting results are obtained by means of the opticalmethods.The images of the SAWs power flows of the diffracted acoustic fields as well as the SAWwavefronts within the grating