p-Nitrophenol permeability and temperature characteristics of an acryloyl-L-proline methyl ester-based porous gel membrane

Thermoresponsive porous gel membranes were synthesized by a simultaneously occurring process consisting of radiation-induced polymerization and crosslinking in aqueous solutions at various concentrations of acryloyl-L -proline methyl ester(A-ProOMe) without a crosslinker. Permeation of p-nitrophenol (PNP) through a thermoresponsive porous gel membrane obtained at a monomer concentration of 80% (w/w) drastically reduced around 14°C, the lower critical solution temperature (LCST) of linear poly(A-ProOMe) in water, from 0.60 × 10⁻³ cm/min at 10°C to no permeation at 18°C, accompanied by changes in both size and shape of pores associated with gel shrinkage. Moreover, it was found that porous gel membranes with a porosity of approximately 60% had a greater PNP permeability constant through porous gel membranes with mutually connected pores obtained at a monomer concentration of 50% (w/w) than individually supported pores obtained at a monomer concentration of 70% (w/w). © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1495–1500, 1998     

Novel enantioselective direct aldol-type reaction promoted by a chiral phosphine oxide as an organocatalyst

Chiral phosphine oxide successfully catalyzed the direct aldol-type reactions of cyclohexanone derivatives and benzaldehyde derivatives in high stereoselectivities. The reaction mechanism involves the in situ formation of trichlorosilyl enol ethers. The present reaction could be extended to the cross-aldol reactions between two aldehydes.     

Sequential reaction intermediates in aliphatic C-H bond functionalization initiated by a bis(mu-oxo)dinickel(III) complex

The reaction of [Ni2(OH)2(Me2-tpa)2]2+ (1) (Me2-tpa = bis(6-methyl-2-pyridylmethyl)(2-pyridylmethyl)amine) with H2O2 causes oxidation of a methylene group on the Me2-tpa ligand to give an N-dealkylated ligand and oxidation of a methyl group to afford a ligand-based carboxylate and an alkoxide as the final oxidation products. A series of sequential reaction intermediates produced in the oxidation pathways, a bis(mu-oxo)dinickel(III) ([Ni2(O)2(Me2-tpa)2]2+ (2)), a bis(mu-superoxo)dinickel(II) ([Ni2(O2)2(Me2-tpa)2]2+ (3)), a (mu-hydroxo)(mu-alkylperoxo)dinickel(II) ([Ni2(OH)(Me2-tpa)(Me-tpa-CH2OO)]2+ (4)), and a bis(mu-alkylperoxo)dinickel(II) ([Ni2(Me-tpa-CH2OO)2]2+ (5)), was isolated and characterized by various physicochemical measurements including X-ray crystallography, and their oxidation pathways were investigated. Reaction of 1 with H2O2 in methanol at -40 degrees C generates 2, which is extremely reactive with H2O2, producing 3. Complex 2 was isolated only from disproportionation of the superoxo ligands in 3 in the absence of H2O2 at -40 degrees C. Thermal decomposition of 2 under N2 generated an N-dealkylated ligand Me-dpa ((6-methyl-2-pyridylmethyl)(2-pyridylmethyl)amine) and a ligand-coupling dimer (Me-tpa-CH2)2. The formation of (Me-tpa-CH2)2 suggests that a ligand-based radical Me-tpa-CH2* is generated as a reaction intermediate, probably produced by H-atom abstraction by the oxo group. An isotope-labeling experiment revealed that intramolecular coupling occurs for the formation of the coupling dimer. The results indicate that the rebound of oxygen to Me-tpa-CH2* is slower than that observed for various high-valence bis(mu-oxo)dimetal complexes. In contrast, the decomposition of 2 and 3 in the presence of O2 gave carboxylate and alkoxide ligands, respectively (Me-tpa-COO- and Me-tpa-CH2O-), instead of (Me-tpa-CH2)2, indicating that the reaction of Me-tpa-CH2* with O2 is faster than the coupling of Me-tpa-CH2* to generate ligand-based peroxyl radical Me-tpa-CH2OO*. Although there is a possibility that the Me-tpa-CH2OO* species could undergo various reactions, one of the possible reactive intermediates, 4, was isolated from the decomposition of 3 under O2 at -20 degrees C. The alkylperoxo ligands in 4 and 5 can be converted to a ligand-based aldehyde by either homolysis or heterolysis of the O-O bond, and disproportionation of the aldehyde gives a carboxylate and an alkoxide via the Cannizzaro reaction.     

Determination of erythromycin A in rat plasma and urine by high-performance liquid chromatography with chemiluminescence detection using Tris(2,2'-bipyridine)ruthenium(II)

A simple and sensitive method was developed for the determination of erythromycin A (EA), decladinosyl erythromycin A (dClEA) and erythromycin B (EB) in rat plasma and urine by high-performance liquid chromatography with electrogenerated chemiluminescence detection using Tris(2,2'-bipyridine)ruthenium(II). The recovery rates of EA, dClEA and EB were 97, 94 and 85% from rat plasma and 89, 83 and 93% from rat urine, respectively. The calibration curves were linear over the concentration ranges 0.05-5 microg/mL for plasma and 0.5-50 microg/mL for urine. The precision and accuracy for all analytes in rat plasma were < or =9.0 and -6.3-7.2%, and those in urine were < or =9.4% and -6.1-7.6%, respectively. This method proved to be a powerful tool for determination of EA, dClEA and EB concentrations in samples from rats.     

Sonoporation-mediated transduction of siRNA ameliorated experimental arthritis using 3 MHz pulsed ultrasound

The goal of this feasibility study was to examine whether sonoporation assisted transduction of siRNA could be used to ameliorate arthritis locally. If successful, such approach could provide an alternative treatment for the patients that have or gradually develop adverse response to chemical drugs. Tumor necrosis factor alpha (TNF-α) produced by synovial fibroblasts has an important role in the pathology of rheumatoid arthritis, inducing inflammation and bone destruction. In this study, we injected a mixture of microbubbles and siRNA targeting TNF-α (siTNF) into the articular joints of rats, and transduced siTNF into synovial tissue by exposure to a collimated ultrasound beam, applied through a probe 6 mm in diameter with an input frequency of 3.0 MHz, an output intensity of 2.0 W/cm² (spatial average temporary peak; SATP), a pulse duty ratio of 50%, and a duration of 1 min. Sonoporation increased skin temperature from 26.8 °C to 27.3 °C, but there were no adverse effect such as burns. The mean level of TNF-α expression in siTNF-treated knee joints was 55% of those in controls. Delivery of siTNF into the knee joints every 3 days (i.e., 7, 10, 13, and 16 days after immunization) by in vivo sonoporation significantly reduced paw swelling on days 20–23 after immunization. Radiographic scores in the siTNF group were 56% of those in the CIA group and 61% of those in the siNeg group. Histological examination showed that the number of TNF-α positive cells was significantly lower in areas of pannus invasion into the ankle joints of siTNF- than of siNeg-treated rats. These results indicate that transduction of siTNF into articular synovium using sonoporation may be an effective local therapy for arthritis.     

Rapid transformation from spherical nanoparticles, nanorods, cubes, or bipyramids to triangular prisms of silver with PVP, citrate, and H2O2

Rapid sphere-to-prism (STP) transformation of silver was studied in aqueous AgNO(3)/NaBH(4)/polyvinylpyrrolidone (PVP)/trisodium citrate (Na(3)CA)/H(2)O(2) solutions by monitoring time-dependent surface plasmon resonance (SPR) bands in the UV-vis region, by examining transmission electron microscopic (TEM) images, and by analyzing emitted gases during fast reaction. Roles of PVP, Na(3)CA, and H(2)O(2) were studied without addition of a reagent, with different timing of each reagent's addition, and with addition of H(2)O(2) to mixtures of spheres and prisms. Results show that prisms can be prepared without addition of PVP, although it is useful to synthesize smaller monodispersed prisms. A new important role of citrate found in this study, besides a known role as a protecting agent of {111} facets of plates, is an assistive agent for shape-selective oxidative etching of Ag nanoparticles by H(2)O(2). The covering of Ag nanoparticles with carboxylate groups is necessary to initiate rapid STP transformation by premixing citrate before H(2)O(2) addition. Based on our data, rapid prism formation starts from the consumption of spherical Ag particles because of shape-selective oxidative etching by H(2)O(2). Oxidative etching of spherical particles by H(2)O(2) is faster than that of prisms. Therefore, spherical particles are selectively etched and dissolved, leaving only seeds of prisms to grow into triangular prisms. When pentagonal Ag nanorods and a mixture of cubes and bipyramids were used as sources of prisms, rod-to-prism (RTP), cube-to-prism (CTP), and bipyramid-to-prism (BTP) transformations were observed in Ag nanocrystals/NaBH(4)/PVP/Na(3)CA/H(2)O(2) solutions. Shape-selective oxidative etching of rods was confirmed using flag-type Ag nanostructures consisting of a triangular plate and a side rod. These data provide useful information for the size-controlled synthesis of triangular Ag prisms, from various Ag nanostructures and using a chemical reduction method, having surface plasmon resonance (SPR) bands at a desired wavelength.     

Van der Pol type self-excited micro-cantilever probe of atomic force microscopy

A technique for dimensional reduction of nonlinear delay differential equations (DDEs) with time-periodic coefficients is presented. The DDEs considered here have a canonical form with at most cubic nonlinearities and periodic coefficients. The nonlinear terms are multiplied by a perturbation parameter. Perturbation expansion converts the nonlinear response problem into solutions of a series of nonhomogeneous linear ordinary differential equations (ODEs) with time-periodic coefficients. One set of linear nonhomogeneous ODEs is solved for each power of the perturbation parameter. Each ODE is solved by a Chebyshev spectral collocation method. Thus we compute a finite approximation to the nonlinear infinite-dimensional map for the DDE. The linear part of the map is the monodromy operator whose eigenvalues characterize stability. Dimensional reduction on the map is then carried out. In the case of critical eigenvalues, this corresponds to center manifold reduction, while for the noncritical case resonance conditions are derived. The accuracy of the nonlinear Chebyshev collocation map is demonstrated by finding the solution of a nonlinear delayed Mathieu equation and then a milling model via the method of steps. Center manifold reduction is illustrated via a single inverted pendulum including both a periodic retarded follower force and a nonlinear restoring force. In this example, the amplitude of the limit cycle associated with a flip bifurcation is found analytically and compared to that obtained from direct numerical simulation. The method of this paper is shown by example to be applicable to systems with strong parametric excitations.     

Polyacetylene and Polynorbornene Derivatives Carrying TEMPO. Synthesis and Properties as Organic Radical Battery Materials

Summary: 2,2,6,6‐Tetramethylpiperidine 1‐oxyl (TEMPO)‐containing N‐propargylamide HCCCH₂NHCO‐4‐TEMPO ( 1 ), propargyl ester HCCCH₂OCO‐4‐TEMPO ( 2 ), phenylacetylene derivative HCCC₆H₃‐3,4‐(CO₂‐4‐TEMPO)₂ ( 3 ), and norbornene diester monomers, NB‐2,3‐exo,exo‐(CH₂OCO‐4‐TEMPO)₂ ( 4 ), NB‐2,3‐endo,exo‐(COO‐4‐TEMPO)₂ ( 5a ), NB‐2,3‐endo,endo‐(COO‐4‐TEMPO)₂ ( 5b ) (NB = norbornene, TEMPO = 2,2,6,6‐tetramethyl‐1‐piperidinyloxyl) were synthesized and polymerized with rhodium and ruthenium catalysts. Monomers 2 , 5a , and 5b gave polymers with number‐average molecular weights of 47 000–185 000 in 59–100% yields, while 1 , 3 , and 4 gave polymers insoluble in common organic solvents in 88–100% yields. The capacities of cells fabricated with poly( 1 ), poly( 2 ), and poly( 3 ) were 67, 82, and 23 Ah · kg⁻¹ based on the weight, respectively. The capacity of poly( 5a )‐based cell reached the theoretical value (109 Ah · kg⁻¹) of the polymer.

Charge–discharge curves of poly( 5a ) at a current density of 0.13 mA · cm⁻² (100 mA · g⁻¹_{‐cathode active material}) in the voltage range of 2.5–4.2 V.     

A new application of statistical moment theory to evaluate the swelling behavior of thermo-responsive gels

The loosely cross-linked poly(acryloyl-L -proline methyl ester) gel, which is known as one of the typical thermo-responsive gels, shows a volume transition around approximately 14°C in pure water. This volume transition is shifted to higher temperature by treatment in aqueous sodium dodecyl sulfate (SDS). The analysis of the swelling-temperature curve (frequency distribution) was performed according to a moment analysis, in which the area under the swelling-temperature curve (AUC), mean swelling transition temperature (MSTT) and variance of swelling transition temperature (VSTT) were calculated. It is shown that the apparent volume transition temperature can be estimated from MSTT and that VSTT can be used to characterize the shape of the corresponding curves.     

Halide-ion conductivities of the complexes of cryptand[2.2.2] with alkali-metal halides and alkaline earth metal halides

Halide ion conductivities of the complexes of cryptand[2.2.2] with alkali-metal halides or alkaline-earth metal halides were measured at 20–160°C. The halide ion conductivities of the complexes were found to be much higher than those of the crown ether complexes with alkali-metal halides or alkaline-earth metal halides. This is caused by the much weaker Coulomb attraction between metal-cation and halide ion in cryptand complexes than in crown ether complexes.