盐酸含量对光固化聚氨酯丙烯酸酯/SiO2杂化材料结构和性能的影响

由正硅酸乙酯水解制得的SiO2溶胶，在以γ—甲基丙烯酰氧丙基三甲氧基硅烷(TMSPM)为偶联剂的体系中，经溶胶-凝胶法制备了透明的光固化聚氨酯丙烯酸酯杂化材料[(PUA—TMSPM)／SiO2]。研究了盐酸浓度对(PUA-TMSPM)／SiO2结构与性能的影响。结果表明：随着pH值减小，硅溶胶体系和(PUA-TM-SPM)／SiO2杂化体系的热稳定性增大；盐酸摩尔分数XHCl的增加使(PUA-TMSPM)／SiO2光固化膜表面的两相界面结合更紧密，涂层变得更致密，并导致膜的硬度和耐磨性提高。     

用含偶氮基的聚苯乙烯大分子引发剂合成两亲性嵌段共聚物

采用含偶氮基的聚苯乙烯预聚物（ＰＳ ＡＣＰＣ）作为引发剂，合成了苯乙烯（Ｓｔ）分别与甲基丙烯酸（ＭＡＡ）、甲基丙烯酸（β 羟丙酯）（ＨＰＭＡ）的嵌段共聚物，考察了ＰＳ ＡＣＰＣ引发第二单体的聚合反应行为，以及影响第二单体转化率和均聚物含量、共聚物组成的因素．用溶解性、凝胶渗透色谱（ＧＰＣ）、红外光谱（ＩＲ）、核磁共振（ＮＭＲ）、动态接触角（ＤＣＡ）等表征了嵌段共聚物．     

顺磁性聚酯金属配合物的合成及其驰豫性能的研究

本文通过二乙三胺五乙酸（ＤＴＰＡ）或乙二胺四乙酸（ＥＤＴＡ）的双酸酐与二元醇或二元酚进行聚合反应，制备了两个系列共１５种新的聚酯型大分子配体及其顺磁性金属配合物，用核磁、红外光谱以及元素分析表征了配体和配合物的结构。初步试验结果表明，与相应的小分子金属配合物相比，聚酯金属配合物具有较高的弛豫性能。     

Enhanced indoor radon concentration by using radon-rich well water in a Japanese wooden house in Fukuoka, Japan

Summary Radon measurements were carried out in a Japanese wooden house built on granitic geology, where radon-rich well water is used. Atmospheric radon concentrations were measured over one year with passive integrated radon monitors. The monitors were distributed at several locations in the house and were replaced every two months. In order to confirm the diurnal variation and heterogeneous distribution of radon, short-term measurements were carried out accordingly. Radon, its decay products and terrestrial gamma-radiations were measured in this survey. From the long-term measurement, the radon concentration in the house ranged from 14 to 184 Bq^. m^-3with an arithmetic mean of 45 Bq^. m^-3. A radon concentration of 184 Bq^. m^-3was observed in the bathroom in spring (March-May) though the radon level was normal in the living room and bedroom. In order to characterize the house, similar measurements were conducted in several surrounding houses. There was a significant difference in radon concentration between the investigated houses. There was a spatial distribution of the radon concentration and the highest value was found in the bathroom. Radon and its decay products concentrations varied with time, which increased from midnight to morning whereas they decreased during daytime. Although the radon concentration in tap water was 1 Bq^. l^-1, a high level of 353 Bq^. l^-1was found in the well water.While well water was being used, the indoor radon concentration near the bathroom increased rapidly with a maximum value of 964 Bq^. m^-3. It is clear that the use of well water enhanced the radon level around the bathroom.     

KF-Al2O3催化下二-γ-吡喃并[2,3-a;2'''',3''''-f]萘衍生物的合成

以芳醛、氰乙酸酯和1,5-萘二酚为原料,以乙醇为溶剂,在80℃以KF/Al2O3为催化剂合成了一系列的2,8-二氨基-4,10-二芳基-4H,10H-二-γ-吡喃并[2,3-a;2',3'-f]萘-3,9-二羧酸酯衍生物,该反应具有反应条件温和、产率良好、操作方便等优点.产物的结构通过IR,1HNMR和元素分析表征,并进一步通过X射线衍射分析确证4h的结构.     

高分子量的枝状聚硅烷的合成与表征

根据硅氢加成反应机理设计了“顺点滴式”工艺 ,高效、低耗地合成了甲基苯乙基二氯硅烷和甲基正己基二氯硅烷 .根据Wurtz还原偶联反应原理 ,采用“预聚”和“混聚”两种工艺分别合成枝状共聚硅烷 ,发现运用“预聚”工艺可以合成分子量很高的枝状聚硅烷 .     

Chemoenzymatic Synthesis of Cellular Adhesion Tripeptide RGD Precursor in Organic Media

IntroductionA characteristic tripeptide sequence Arg-Gly-Asp(RGD) that is found within fibronectin and other rela-ted adhesion molecules in extracellular matrices(ECM)has received considerable attention from researcherssince it was proved to be a recognit…     

表面活性剂对纤维素接枝共聚物溶液粘度性质的影响

研究了阴离子十二烷基硫酸钠(SDS)、阳离子十六烷基三甲基溴化铵(CTAB)和非离子聚乙二醇辛基苯基醚(OP)等三种不同类型的表面活性剂对疏水化水溶性两性纤维素接枝共聚物(CGAO)溶液粘度性质的影响.结果表明,在SDS和OP的临界胶束浓度(cmc)附近，CGAO溶液粘度最大，SDS引起CGAO粘度的变化大于OP；即使在CTAB的cmc附近，随着CTAB浓度的增加，CGAO的粘度一直呈下降趋势；非疏水改性的纤维素接枝共聚物的溶液粘度随SDS或CTAB浓度的增加而下降，但几乎不随OP浓度的增大而变化.此外，通过凝胶渗透色谱法测得的保留时间证实了SDS、CTAB和OP与CGAO之间的疏水缔合作用.     

IClO2异构化反应机理及电子密度拓扑研究

利用密度泛函理论方法研究了IClO2异构化反应机理. 优化得到了七种异构体, 其中OIClO和IClOO还未见报道, 对各异构体的热力学稳定性进行了比较. 找到了异构化过程的过渡态, 并通过内禀反应坐标(IRC)计算确认了各个异构体之间的相互转化关系. 从量子拓扑学的角度, 对典型异构化反应通道IRC途径上的各点进行了电子密度拓扑分析, 讨论了反应过程中化学键的断裂、生成以及化学键的变化规律, 找到了反应途径上的能量过渡态(ETS)和结构过渡态(STS).     

Methotrexate-loaded biodegradable polymeric micelles: preparation, physicochemical properties and in vitro drug release

Polymeric micelles based on amphiphilic diblock copolymers methoxy poly(ethylene glycol)-polylactide with various hydrophobic lengths were designed as carriers of poorly water-soluble anticancer drug methotrexate (MTX). Relationship between physicochemical characteristics of micelles and release behavior was explored. The critical micelle concentration was determined by fluorescence spectroscopy using 9-chloromethyl anthracene as fluorescence probe. Core-shell type polymeric micelles were prepared by free-surfactant dialysis technique. The mean size of micelles loaded with MTX was 50-200 nm with narrow polydispersity. Physicochemical properties of drug-loaded micelles were evaluated. In vitro release behavior of MTX was also investigated. MTX was continuously released from micelles and less than 50% MTX was released in 5 days. Release rate was dependent on chemical structures of micelles and enhanced by decreasing polylactide lengths.