Dependence of Elution Curve and Adsorption Isotherms of Insulin on composition of Mobile Phase of Frontal Analysis in Reversed Phase Liquid Chromatography

With frontal analysis(FA),the dependence of adsorption isotherms of insulin on the composition of mobile phase in reversed phase liquid chromatography (RPLC) has been investigated,This is also a good example to employ the stoichiometric displacement theory (SDT) for ivestigating solute adsorption in physical chemistry.Six kinds of mobile phase in RPLC were employed to study the effects on the elution curves and adsorption isotherms of insulin.the key points of this paper are:(1) the stability of insulin due to delay time after preparing,the organic solvent concentration,the kind and the concentration of ion-pairing agent in mobile phase were found to affect both elution curve and adsorption isotherm very seriously.(2)To obtain a valid and comparable result,the composition of the mobile phase employed in FA must be as same as possible to that in usual RPLC of either analytical scale or preparative purpose.(3)Langmuir Equation and the SDT were employed to imitate these obtained adsorption isotherms.The expression for solute adsorption from solution of the SDT was found to have a better elucidation to the insulin adsorption from mobile phase in RPLC.     

Oxidation of Stereo‐regular Poly(styrene‐co‐4‐methylstyrene) by Cobalt(II) Acetate Tetrahydrate/Sodium Bromide Catalyst

Chemical modification on the stereo‐regular poly(styrene‐co‐4‐methylstyrene) (sPS‐PMS) was attempted in this study. Metallocene copolymerization of styrene (St) and 4‐methylstyrene (MSt) was performed by using η⁵‐pentamethylcyclopentadienyl‐titanium(IV)tributoxide (Cp*Ti(OBu)₃)/methylaluminoxane (MAO)/tri‐iso‐butylaluminum (TIBA) catalyst in the bulk state. Cobalt(II) catalyst was then applied to oxidize the benzylic methyl group on the MSt units of the resulting sPS‐PMS copolymer. Both aldehyde and carboxylic acid in the oxidized products were resolved by the FTIR and ¹H NMR. The oxidized sPS‐PMSs exhibit a low and a high‐temperature T_g and T_m corresponding to the transitions in the amorphous and the crystalline regions. Hydrogen‐bond and polar interactions between the aldehyde and carboxylic acids tend to interrupt the regular chain packing of the oxidized sPS‐PMS, resulting in the lowering of T_m with oxidation level. The oxidized sPS‐PMS showed better adhesion to glass fiber than pure sPS‐PMS copolymer as evaluated from the respective SEM fractured micrographs.     

钴膦簇合物的催化环丙烷化反应

本文首次利用碳基钴簇合物ＰｈＰＣｏ_３（ＣＯ）_９催化剂，在常压和－２０℃－０℃，用苯乙烯和重氮乙酸乙酯进行环丙烷化反应，合成了菊酸酯，重氮乙酸乙酯可全部转化，酯的选择性可达８５％。产物经减压分馏后，由ＩＲ和￣１ＨＮＭＲ分析，确证了产物为菊酸酯，表明了羰基钴簇合物对苯乙烯的环丙烷化反应有良好的催化性能，为四面体异核簇合物用于不对称催化反应打下了基础。     

γ-射线辐照对尼龙6纤维结构的影响

<正> 过去的大多数研究表明,高能射线辐照会引起聚乙烯及聚丙烯等稀烃类聚合物分子链交联及降解,而且会导致结晶度下降。张利华等人最近的研究表明,对于尼龙1010塑料,仅当辐照剂量高到一定程度后,辐照才会破坏结晶。此外,Stowe等人曾经研究过近紫外线对尼龙66纤维结构的影响,结果表明,在空气气氛中的近紫外辐照主要导致尼龙66纤维降解,并使纤维结晶度提高。有关高能射线辐照对高度取向的合成纤维结构及性能的影响的研究尚不多见。本工作将讨论γ-射线对于尼龙6纤维结构的影响。     

FFC-1离子交换纤维对酸碱有害气体吸附性能的研究

系统考察了不同直径及反离子形式的FFC-1聚羧酸离子交换纤维对酸碱有害气体的穿透吸附,各种温、湿度条件下的吸水率,以及作为有害气体吸附滤除材料的重复使用与再生性能。研究表明:FFC-1纤维直径的减小有利于提高对有害气体的动态吸附容量。在体系温度、相对湿度分别为15℃、50%时,以3D腈纶为起始原料的钠型FFC-1离子交换纤维的吸水率≥350mg/g.纤维;对SO2的穿透吸附容量可达200mg/g.纤维。FFC-1离子交换纤维具有良好的重复使用与再生能力,经20次再生循环使用后,纤维交换容量未见明显变化。     

Crystal engineering of a versatile building block toward the design of novel inorganic-organic coordination architectures

Six novel inorganic-organic coordination supramolecular networks based on a versatile linking unit 4-pyridylthioacetate (pyta) and inorganic Co(II), Cu(II), Ag(I), Zn(II), Mn(II) and Pb(II) salts have been prepared in water medium and structurally characterized by single-crystal X-ray diffraction analysis. Reaction of CoCl(2).6H(2)O with Hpyta afforded a neutral mononuclear complex [Co(pyta)(2)(H(2)O)(4)](1), which exhibits a two-dimensional (2-D) layered architecture through intermolecular O-HO interactions. Reaction of CuCl(2.2H(2)O with Hpyta yielded a neutral one-dimensional (1-D) coordination polymer [[Cu(pyta)(2)(H(2)O].0.5H(2)O](n)(2) consisting of rectangle molecular square units, which show a three-dimensional (3-D) supramolecular network through S...S and O-H...O weak interactions. However, when AgNO(3), Zn(OAc)(2).2H(2)O or MnCl(2).4H(2)O salts were used in the above self-assembled processes, the neutral 2-D coordination polymers [Ag(pyta)](n)(3), [[Zn(pyta)(2)].4H(2)O](n)(4) or [[Mn(pyta)(2)(H(2)O)]](n)(5) with different topologies were obtained, respectively. While substituting the transition metal ions used in 1-5 with Pb(OAc)(2).3H(2)O, a one-dimensional coordination polymer [Pb(pyta)(2)](n)(6), which shows a novel 2-fold interpenetrating 2-D supramolecular architecture through weak SS interactions, was isolated. It is interesting to note that the building block pyta anion exhibits different configurations and coordination modes in the solid structures of complexes 1-6. These results indicate that the versatile nature of this flexible ligand, together with the coordination preferences of the metal centers, play a critical role in construction of these novel coordination polymers or supramolecules. The spectral and thermal properties of these new materials have also been investigated.     

Inorganic—Organic Hybrid 18—Molybdodiphosphate Nanoparticles Bullk—modified Carbon Paste Electrode and Its Electrocatalysis

A kind of inorganic‐organic hybrid 18‐molybdodiphosphate nanoparticles ([(C₄H₉)₄N]₆P₂Mo₁₈Q₆₂·4H₂O) was firstly used as a bulk‐modifier to fabricate a three‐dimensional chemically modified carbon paste electrode (CPE) by direct mixing. The electrochemical behavior of the solid nanoparticles dispersed in the CPE in acidic aqueous solution was characterized by cyclic and square‐wave voltammetry. The hybrid 18‐molybdodiphosphate nanoparticles bulk‐modified CPE (MNP‐CPE) displayed a high electrocatalytic activity towards the reduction of nitrite, bromate and hydrogen peroxide. The remarkable advantages of the MNP‐CPE over the traditional polyoxometalates‐modified electrodes are their excellent reproducibility of surface‐renewal and high stability owing to the insolubility of the hybrid 18‐molybdodiphosphate nanoparticles.     

Di‐2‐pyridyl ketone N4,N4‐(butane‐1,4‐diyl)thiosemicarbazone

The title compound, C₁₆H₁₇N₅S, is in the thione form and crystallizes with two independent mol­ecules in the asymmetric unit. In both mol­ecules, the penta­methyl­ene­imine five‐membered ring adopts an envelope conformation, and in one of the molecules this ring shows positional disorder. The thione S and hydrazine N atoms are in the Z configuration with respect to the C—N bond.     

Chemical constituents from the roots of <Emphasis Type="Italic">Polygonum bistorta</Emphasis>

Investigation of the roots of Polygonum bistorta L. afforded seven compounds including five triterpenoids, a coumarin, and a steroid, the structures of which were identified by EIMS, ¹H NMR, ¹³C NMR, DEPT, and HMBC experiments. All the compounds have been isolated from Polygonum genus for the first time. Published in Khimiya Prirodnykh Soedinenii, No. 5, pp. 463–465, September–October, 2007.