碱改性γ－Al_2O_3催化剂表面碱强度分布与COS水解活性的研究

用非水滴定法和Ｈａｍｍｅｔｔ系列指示剂测定了ＣＯＳ水解碱改性γ－Ａｌ_２Ｏ_３催化剂的表面碱强度分布．发现表面碱强度分布不均匀与表面能量分布不均匀相呼应．采用零点酸碱强度（Ｈ_（０，ｍａｘ））及碱中心区域分析法，Ｂｒｏｎｓｔｅｄ催化定律，进一步证实ＣＯＳ水解反应具有明显碱催化特征，较高活性催化剂的Ｈ_（０，ｍａｘ）一般为１０左右，对ＣＯＳ水解反应起主要作用的碱性中心的碱强度（Ｈ_０）为４．８≤Ｈ_０≤９．８．对碱金属氧化物改性后的γ－Ａｌ_２Ｏ_３催化剂，Ｂｒｏｎｓｔｅｄ规律在每个碱强度分区域内是适用的．     

Topology evolution and gelation mechanism of agarose gel

Kinetics as well as the evolution of the agarose gel topology is discussed, and the agarose gelation mechanism is identified. Aqueous high melting (HM) agarose solution (0.5% w/v) is used as the model system. It is found that the gelation process can be clearly divided into three stages: induction stage, gelation stage, and pseudoequilibrium stage. The induction stage of the gelation mechanism is identified using an advanced rheological expansion system (ARES, Rheometric Scientific). When a quench rate as large as 30 deg C/min is applied, gelation seems to occur through a nucleation and growth mechanism with a well-defined induction time (time required for the formation of the critical nuclei which enable further growth). The relationship between the induction time and the driving force which is determined by the final setting temperature follows the 3D nucleation model. A schematic representation of the three stages of the gelation mechanism is given based on turbidity and rheological measurements. Aggregation of agarose chains is promoted in the polymer-rich phase and this effect is evident from the increasing mass/length ratio of the fiber bundles upon gelation. Continuously increasing pore size during gelation may be attributed to the coagulation of the local polymer-rich phase in order to achieve the global minimum of the free energy of the gelling system. The gel pore size determined using turbidity measurements has been verified by electrophoretic mobility measurements.     

C9‐Iridoids from Scrophularia buergeriana

Four new iridoids, buergerinins B–E ( 1 – 4 ), along with three known iridoids, were isolated from the roots of Scrophularia buergeriana. Their structures were identified on the basis of spectroscopic analysis.     

Study on synthesis of two-armed polymers containing a crown ether core and their self-assembly behaviors in selective solvents

A series of well-defined two-armed polymers containing a crown ether core, poly(stearyl methacrylate)-crown ether-poly(stearyl methacrylate) (PSMA-crown-PSMA), with different molecular weight were synthesized via atom transfer radical polymerization (ATRP). The resultant polymers were characterized by ¹H NMR and GPC. The self-assembly behaviors of this kind of polymer in selective solvents were studied by TEM, and it was found that polymers with different molecular weight can directly self-assemble into hollow spheres, solid spheres and a monolayer film with regular pores by varying molecular weight and water content. The possible molecular packing motels for their self-assembly behaviors were proposed.     

Comparative X-ray photoelectron spectroscopic study on the desulfurization of thiophene by Raney nickel and rapidly quenched skeletal nickel

The desulfurization of thiophene on Raney Ni and rapidly quenched skeletal Ni (RQ Ni) has been studied in ultrahigh vacuum (UHV) by X-ray photoelectron spectroscopy (XPS). The Raney Ni or RQ Ni can be approximated as a hydrogen-preadsorbed polycrystalline Ni-alumina composite. It is found that thiophene molecularly adsorbs on Raney Ni or RQ Ni at 103 K. At 173 K, thiophene on alumina is desorbed, while thiophene in direct contact with the metallic Ni in Raney Ni undergoes C-S bond scission, leading to carbonaceous species most probably in the metallocycle-like configuration and atomic sulfur. On RQ Ni, the temperature for thiophene dissociation is about 100 K higher than that on Raney Ni. The lower reactivity of RQ Ni toward thiophene is tentatively attributed to lattice expansion of Ni crystallites in RQ Ni due to rapid quenching. The existence of alumina and hydrogen may block the further cracking of the metallocycle-like species on Raney Ni and RQ Ni at higher temperatures, which has been the dominant reaction pathway on Ni single crystals. By 473 K, the C 1s peak has disappeared, leaving nickel sulfide on the surface.     

卡尔曼滤波分光光度法同时测定钢样中的硅、磷、砷

研究了在聚乙烯醇存在下,硅、磷、砷钼杂多酸与罗丹明6G形成离子缔合物的反应,建立了能同时测定硅、磷、砷的卡尔曼滤波分光光度法。用于钢样中微量硅、磷、砷的同时测定,操作简便快速,相对误差小于8％。     

线粒体热化学研究──Ⅳ．鱼类肝脏线粒体代谢的微量热学研究

线粒体热化学研究──Ⅳ．鱼类肝脏线粒体代谢的微量热学研究谭安民，刘义，谢昌礼，屈松生，顾贫，邓凤姣（武汉大学化学系武汉４３００７２）（武汉大学生命科学院武汉）关键词鱼肝脏，线粒体，微量热学，热化学线粒体在能量代谢的过程中，除一部分能量用于合成ＡＴＰ外...     

氧化铝显微结构和磨损性能的研究

对种分和碳分氧化铝的显微结构以及磨损前后氧化铝显微结构进行了观察,结合氧化铝磨损指数分析发现,不同强度氧化铝的磨损性能有区别,磨损指数接近的氧化铝磨损性能有可能不同.     

A new piezoelectric response model for population growth of bacteria

A piezoelectric response model on the population growth of microorganism is proposed. This model is based on a novel population growth model, which has a more obvious ecological meaning and the fact that the series piezoelectric quartz crystal (SPQC) sensor responses to conductivity changes of the medium during the growth of the microorganism. From the response model four parameters can be obtained including the maximum specific growth rate mu(m), saturated population size N(m), and two constants C and K(1). The influence of the parameters on the response curve is discussed in which the influences of mu(m) and N(m) are more obvious. With the proposed model the quantitative determination of bacteria may be more accurate than the frequency detection time (FDT) method. Then the growth of Escherichia coliform (E. coli) monitored with a SPQC sensor is compared with the simulated growth curve obtained by the proposed model and a good agreement is obtained.     

Filamentous growth in activated sludge

Applied Biochemistry and Biotechnology - Bulking and foaming in activated sludge have been associated with filamentous overgrowth. FilamentousNocardia amarae and nonfilamentousPseudomonas...