Continuum mixing and coupled channel effects inc\bar c andb\bar b quarkonium

We apply the unitarized quark model to heavy \(c\bar c\) and \(b\bar b\) quarkonium and study mass shifts and mixings induced by hadronic coupled channel effects. In particular, we study the two-meson continuum mixing in the quarkonium wave functions. It is found that the continuum component is 2–20% in the \(c\bar c\) and \(b\bar b\) states, measured as the squared sum of two-meson amplitudes \((D\bar D,D\bar D^ * + cc,D^ * \bar D^ * ,F\bar F,F\bar F^ * + cc,F^ * \bar F^ * for c\bar c)\) . It is the largest for states near or above the first threshold. These continuum mixings reduce the predicted radiative widths by 5–30%. The mass shifts of theP andF wave \(q\bar q\) states are similar to those ofS andD wave states previously studied. The computed resonance mixing matrices are explicitly given, enabling future calculations of relativistic effects, QCD effects, etc., to include also the coupled channel effects.     

On-column derivatization-capillary electrochromatography with o-phthalaldehyde/alkylthiol for assay of biogenic amines

The elution behaviors of the biogenic amines, histamine (HA) and its metabolite methyl histamine (MHA), were evaluated by means of on-column derivatization (OCD)-capillary electrochromatography (CEC) which employed a monolithic octadecylsilica (ODS) capillary column (20 cm of effective length x 50 microm of inner diameter). Five kinds of alkylthiols, e.g., 2- hydroxyethylthiol (or 2-mercaptoethanol (2-ME)), ethanethiol (ET), 1-propanethiol (1-PT), 2-methyl-1-propanethiol (2-MPT) and 1-butanethiol (1-BT) were separately presented at 5 mM each in the OCD-CEC separation run buffer consisting of 60% acetonitrile in 5 mM o-phthalaldehyde (OPA)-10 mM borate buffer (pH 10). When 2-ME was present in the run buffer solution, both derivatives corresponding to HA and MHA migrated separately, but closely together through the capillary column. Replacement of 2-ME with 1-BT in the run buffer solution caused a delay in their elution profiles on the electrochromatogram and the separation between those two peaks became remarkably improved. The elution times of HA and MHA followed the increase in alkyl chain length or hydrophobicity of thiol, 1-BT > 2-MPT > 1-PT > ET > 2-ME. Performance of on-line preconcentrations of HA and MHA was also evaluated by varying the electrokinetic injection voltage from 1 kV to 8 kV. The peak area counts corresponding to HA recorded about 50 times higher when 2 kV was applied for 240 s to a 0.1 mM HA solution than when 8 kV was applied for 5 s. This method was next applied to a sample of human urine spiked with HA and MHA at levels of 0.1 microM each. Although HA and MHA peaks were not identifiable among the peaks corresponding to the materials in the urine matrix when OPA/2-ME was employed in a run buffer for the OCD-CEC, the separation and identification of their peaks became possible by replacing 2-ME with 1-BT in the run buffer solution.     

Design and synthesis of novel type somatostatin analogs with antiproliferative activities on A431 tumor cells

It was reported that the somatostatin analog TT-232, d-Phe-c(Cys-Tyr-d-Trp-Lys-Cys)-Thr-NH₂, exhibited a highly potent antitumor activity in vitro and in vivo. Using pyrazinone analogs and aliphatic amino acids instead of the disulfide bond, we prepared novel type somatostatin analogs including the sequence essential for antitumor activities, Tyr-d-Trp-Lys. These analogs exhibited antiproliferative effect on A431 tumor cells.     

Pre-fibrillation of pulps to manufacture cellulose nanofiber-reinforced high-density polyethylene using the dry pulp direct kneading method

The dry pulp direct kneading method is an industrially viable, low-energy process for manufacturing cellulose nanofiber (CNF)-reinforced polymer composites, where the chemically modified pulps are nanofibrillated and uniformly dispersed in the polymer matrix during melt compounding. In the present study, cellulose fibers of various sizes ranging from surface-fibrillated pulps (20 μm in width) to fine CNFs (20 nm in width) were prepared from softwood bleached kraft pulps using a refiner and a high-pressure homogenizer. These cellulose fibers were modified with alkenyl succinic anhydride and dried. The dried fibers were used as a feed material for melt compounding in the dry pulp direct kneading method to fabricate CNF-reinforced high-density polyethylene (HDPE). When surface-fibrillated pulps were employed as a feed material, the pulps were nanofibrillated and dispersed uniformly in the HDPE matrix during melt compounding. The resulting composites had much better properties—i.e., much higher tensile modulus and strength values, and much lower coefficient of thermal expansion values—than the composites produced using pulps without pre-fibrillation. However, when CNFs were used as a feed material, they were shortened and agglomerated during melt compounding, and the properties of the composites consequently deteriorated. The study concludes that surface-fibrillated pulp, which can be produced cost-effectively using a refiner on an industrial scale, is more suitable as a feed material than CNFs for melt compounding in the dry pulp direct kneading method. This finding enables the elimination of a preliminary step in the preparation of CNFs from pulps, which is a time-consuming and energy-intensive process.

Graphical abstract

     

Kinetic study of the electron-transfer oxidation of the phenolate anion of a vitamin E model by molecular oxygen generating superoxide anion in an aprotic medium

Electron-transfer reduction of molecular oxygen (O2) by the phenolate anion (1-) of a vitamin E model, 2,2,5,7,8-pentamethylchroman-6-ol (1H), occurred to produce superoxide anion, which could be directly detected by a low-temperature EPR measurement. The rate of electron transfer from 1- to O2 was relatively slow, since this process is energetically unfavourable. The one-electron oxidation potential of 1- determined by cyclic voltammetric measurements is sufficiently negative to reduce 2,2-bis(4-tert-octylphenyl)-1-picrylhydrazyl radical (DOPPH*) to the corresponding one-electron reduced anion, DOPPH-, suggesting that 1- can also act as an efficient radical scavenger.     

Synthesis of Optically Active P‐Chiral and Optically Inactive Oligophosphines

A series of optically active P‐chiral oligophosphines (S,R,R,S)‐ 2 , (S,R,S,S,R,S)‐ 3 , (S,R,S,R,R,S,R,S)‐ 4 , and (S,R,S,R,S,R,R,S,R,S,R,S)‐ 5 with four, six, eight, and 12 chiral phosphorus atoms, respectively, were successfully synthesized by a step‐by‐step oxidative‐coupling reaction from (S,S)‐ 1 . The corresponding optically inactive oligophosphines 1′ – 5′ were also prepared. Their properties were characterized by DSC, XRD, and optical‐rotation analyses. While optically active bisphosphine (S,S)‐ 1 and tetraphosphine (S,R,R,S)‐ 2 behaved as small molecules, octaphosphine (S,R,S,R,R,S,R,S)‐ 4 and dodecaphosphine (S,R,S,R,S,R,R,S,R,S,R,S)‐ 5 exhibited the features of a polymer. Furthermore, DSC and XRD analyses showed that hexaphosphine (S,R,S,S,R,S)‐ 3 is an intermediate between a small molecule and a polymer. Comparison of optically active oligophosphines 1 – 5 with the corresponding optically inactive oligophosphines 1′ – 5′ revealed that the optically active phosphines have higher crystallinity than the optically inactive counterparts. It is considered that the properties of oligophosphines depend on the enantiomeric purity as well as the oligomer chain length.     

Preparation of aromatic copolyesteramides by the direct polycondensation with a vilsmeier adduct derived from tosyl chloride and N,N-dimethylformamide

The reaction promoted by Vilsmeier adduct derived from tosyl chloride (TsCl) with N,N-dimethylformamide (DMF) was successfully applied to the preparation of copolyesteramides of high molecular weights directly from aromatic dicarboxylic acids, diamines, and bisphenols. The polycondensation was significantly affected by the reaction of activated dicarboxylic acids with bisphenols and diamines. Addition of a mixture of bisphenols and diamines likely caused gelation of the reaction mixtures, resulting in insoluble polymers, especially with high mol % diamines. Stepweise addition of them, however, gave the homogeneous reaction mixtures and copolymers of better solubility. These phenomena were studied in terms of sequence length distribution of polyester units, which was estimated by thermal analyses of the random copolymers prepared under various conditions for the initial reaction with bisphenols.     

On the electrical conductivity of intermediate valence compounds

The electrical resistivity of the hybridized 4f-(5d/6s) system interacting with LA phonons is calculated by applying the memory function method to the periodic Anderson model in Hartree-Fock approximation. We propose a new mechanism to explain in part the anomalous resistivity of mixed valence compounds such as CePd₃. For finite hybridizationV a finite fraction of 4f electrons participates in electrical conduction leading to an essential change of the normald band current. Resistivity and the fraction of 4f electrons increase with increasing value of [V/(E–)]² where (E–) is the distance between the effective positionE of the 4f level and the chemical potential. In typical mixed valence systems [V/(E–)]² is strongly temperature dependent and decreases with increasing temperature. This explains the high temperature resistivity behaviour of CePd₃. For (E–) being small compared to the Debye-temperature the resistivity is enhanced and becomes extremely sensitive to small changes of (E–).Work performed within the research program of the Sonderforschungsbereich 125, Aachen-Jülich-Köln     

Detection of varicocele by using 99mTc-diethylenetriamine pentaacetic acid human serum albumin (99mTc-DTPA human serum albumin)

In order to detect the varicocele, scrotal scintigraphies by using 99mTc-HSA-D were performed in 14 patients with male infertile or palpable mass in left scrotum on physical examinations. Abnormal pooling of 99mTc-HSA-D, indicative of varicocele lesion, could be found in left scrotum in 9 cases, confirmed surgically or clinically. Compared with 99mTc-HSA, 99mTc-HSA-D was superior in high uptake ratio of varicocele to soft tissue and in nonvisualization of bladder. Thus, 99mTc-HSA-D scrotal scintigraphy seemed to be of a great use to detect the varicocele.     

Crystal Structure, Electric and Magnetic Properties of Layered Cobaltite β-NaxCoO2

The layered oxide thermoelectric material β-Na_0.67CoO₂ has been studied by powder neutron diffraction, electric and magnetic measurements. This compound includes an edge-sharing CoO₆ slab and a highly vacant Na⁺ sheet in a unit cell (space group symmetry C2/m, a=4.9023(4) Å, b=2.8280(2) Å, c=5.7198(6) Å and β=105.964(6)° at 300 K). The evaluated formal valence of cobalt ion, +3.33(1), is ascribed to the coexistence of Co³⁺ and Co⁴⁺ in the ratio 2:1. Polycrystalline β-Na_0.67CoO₂, a p-type thermoelectric material, exhibits metallic behavior of the electric resistivity below 300 K. The Curie-Weiss-type magnetic susceptibility indicates antiferromagnetic interactions between magnetic cobalt ions in the edge-sharing CoO₆ slab.