废旧聚酯（PET）的化学循环利用

废旧PET 聚酯可通过化学解聚来实现其循环利用。本文总结了废旧PET 聚酯化学循环利用领域的研究现状, 介绍了目前国内外开发的主要化学解聚工艺方法, 包括水解法、甲醇解聚法、乙二醇解聚法等, 同时对各种工艺过程的优缺点进行了综合比较。     

Mineralization mechanism of calcium phosphates under three kinds of Langmuir monolayers

Three kinds of Langmuir monolayers formed by dipalmitoylphosphatidylcholine (DPPC), arachidic acid (AA), and octadecylamine (ODA) were used as templates to study the initial stage of nucleation and crystallization of calcium phosphates. It was demonstrated that the combination of calcium ions (or phosphates) to the monolayer/subphase interface is a prerequisite for subsequent nucleation. It was found that calcium phosphate dihydrate (DPCD) formed at 25.0 degrees C for 12 h has a biphasic structure containing both amorphous and crystalline phases. These results showed that calcium phosphates were formed through a multistage assembly process, during which an initial amorphous phase DPCD was followed by a phase transformation into a crystalline phase and then the most stable hydroxyapatite (HAp). This provided new insights into the template-biomineral interaction and a mechanism for biomineralization.     

金纳米粒子在氨基表面上的组装-pH值的影响

用原子力显微镜（AFM）和表面增强喇曼光谱（SERS）研究了pH值对金纳米粒子在Au／巯基苯胺自组装膜表面上组装效果的影响．AFM结果表明，金纳米粒子在表面上的覆盖度随pH值表现出规律性的变化，巯基苯胺自组装膜的SERS强度随pH值的变化也有类似的趋势．在磁性环境下，氨基未质子化，金粒子难以组装上，而在酸性条件下，氨基质子化带正电，金粒子与基底容易结合．我们认为金纳米粒子和氨基之间的作用属于静电力，pH值同时影响膜表面氨基的质子化程度和金纳米粒子表面的带电量．     

A facile synthesis of highly functionalized dihydrofurans based on 1,4-diazabicyclo[2.2.2]octane (DABCO) catalyzed reaction of halides with enones

Treatment of halides 5 with electrophilic alkenes 2 afforded the corresponding dihydrofurans 3 and 4 in the presence of 1, 4-diazabicyclo[2.2.2]octane (DABCO) with good to excellent yields and in a stereoselective manner in most cases. Moreover, the stereoisomers 3 and 4 could be easily transformed each other in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU).     

Visually precise,low-damage,single-cell spatial manipulation with single-pixel resolution

The analysis of single living cells, including intracellular delivery and extraction, is essential for monitoring their dynamic biochemical processes and exploring intracellular heterogeneity. However, owing to the 2D view in bright-field microscopy and optical distortions caused by the cell shape and the variation in the refractive index both inside and around the cells, achieving spatially undistorted imaging for high-precision manipulation within a cell is challenging. Here, an accurate and visual system is developed for single-cell spatial manipulation by correcting the aberration for simultaneous bright-field triple-view imaging. Stereo information from the triple view enables higher spatial resolution that facilitates the precise manipulation of single cells. In the bright field, we resolved the spatial locations of subcellular structures of a single cell suspended in a medium and measured the random spatial rotation angle of the cell with a precision of ±5°. Furthermore, we demonstrated the visual manipulation of a probe to an arbitrary spatial point of a cell with an accuracy of <1 pixel. This novel system is more accurate and less destructive for subcellular content extraction and drug delivery.

We achieved the low-damage spatial puncture of single cells at specific visual points with an accuracy of <65 nm.     

Long term stability of organic selenium species in aqueous solutions

Long term stability of organic selenium compounds (selenocystine, selenomethionine, trimethylselenonium ion) has been studied over a one year period for 2 analyte concentrations: 25 and 150 μg/L Se, at pH 4.5 in the dark, under different storage conditions: temperature of –20°C, 4°C, 20°C, 40°C; in Pyrex, Teflon, or polyethylene containers; in an aqueous matrix or in the presence of a chromatographic counter ion (pentyl sulfonate at 10^–4 mol/L concentration). Light effects have also been tested. The stability of the selenium species was monitored by HPLC-ICP/MS. Storage conditions can drastically alter the stability of organic selenium species. Organoselenium compounds were shown to be stable in the dark over a one year period in an aqueous matrix at pH 4.5 in Pyrex containers at both 4°C and 20°C. Pyrex vials exposed to natural sunlight at room temperature resulted in a steady decrease of the selenoamino acid concentration. Teflon containers caused losses of less than 25% at both 4° C and 20° C in the dark. However, polyethylene vials presented, at all temperatures tested, a rapid decrease of the TMSe⁺ concentration. The stability of the Se species studied did not show significant differences between 4° C and 20° C in any container material used. Storage of solutions at 40° C led to slight differences between the Pyrex and Teflon containers. However, polyethylene presented a drastic decrease of the three species over time at this higher temperature. Solutions frozen at –20° C in polyethylene vials did not stabilize the TMSe⁺ signal. Finally, concentrations and matrices of the samples did not significantly affect the stability of the species. Received: 15 July 1996 / Revised: 14 July 1997 / Accepted: 18 July 1997     

Catalyzed Asymmetric Arylation Reactions

Addition and substitution reactions with carbon nucleophiles are fundamental processes in organic synthesis, and the development of general catalytic asymmetric variants thereof is still a major challenge today. In contrast to enantioselective alkyl transfer reactions, the corresponding arylations have not yet reached a high level of maturity. The existing protocols are either of no general applicability or are limited in terms of selectivity. This article summarizes established routes for catalytic asymmetric aryl transfer together with the latest developments in this area. The scope and limitations of this reaction are discussed.     

Atomic Force Microscopy Study of TiO2 Films Obtained by the Sol-Gel Method

Atomic Force Microscopy (AFM) was used to study the influence of thermal treatments on the structural and textural properties of the sol-gel TiO2 films obtained from Ti(OC3H7i)4. X-ray diffraction (XRD), ellipsometric and porosity measurements have also been made.The TiO2 sol-gel films were homogeneous, transparent and amorphous. Heat treatments in the 400–600°C range indicate that the films have a strong tendency to crystallization. The high initial homogeneity of the TiO2 films was preserved during the crystallization process. AFM shows that the thermally treated films exhibit uniform, monodispersed crystals.     

Mass spectrometry-based chemical mapping and profiling toward molecular understanding of diseases in precision medicine

Precision medicine has been strongly promoted in recent years. It is used in clinical management for classifying diseases at the molecular level and for selecting the most appropriate drugs or treatments to maximize efficacy and minimize adverse effects. In precision medicine, an in-depth molecular understanding of diseases is of great importance. Therefore, in the last few years, much attention has been given to translating data generated at the molecular level into clinically relevant information. However, current developments in this field lack orderly implementation. For example, high-quality chemical research is not well integrated into clinical practice, especially in the early phase, leading to a lack of understanding in the clinic of the chemistry underlying diseases. In recent years, mass spectrometry (MS) has enabled significant innovations and advances in chemical research. As reported, this technique has shown promise in chemical mapping and profiling for answering “what”, “where”, “how many” and “whose” chemicals underlie the clinical phenotypes, which are assessed by biochemical profiling, MS imaging, molecular targeting and probing, biomarker grading disease classification, etc. These features can potentially enhance the precision of disease diagnosis, monitoring and treatment and thus further transform medicine. For instance, comprehensive MS-based biochemical profiling of ovarian tumors was performed, and the results revealed a number of molecular insights into the pathways and processes that drive ovarian cancer biology and the ways that these pathways are altered in correspondence with clinical phenotypes. Another study demonstrated that quantitative biomarker mapping can be predictive of responses to immunotherapy and of survival in the supposedly homogeneous group of breast cancer patients, allowing for stratification of patients. In this context, our article attempts to provide an overview of MS-based chemical mapping and profiling, and a perspective on their clinical utility to improve the molecular understanding of diseases for advancing precision medicine.

An overview of MS-based chemical mapping and profiling, indicating its contributions to the molecular understanding of diseases in precision medicine by answering "what", "where", "how many" and "whose” chemicals underlying clinical phenotypes.     

Hydrophobic Molecular Similarity from MST Fractional Contributions to the Octanol/water Partition Coefficient

Summary The use of a recently proposed hydrophobic similarity index for the alignment of molecules and the prediction of their differences in biological activity is described. The hydrophobic similarity index exploits atomic contributions to the octanol/water transfer free energy, which are evaluated by means of the fractional partitioning scheme developed within the framework of the Miertus-Scrocco-Tomasi continuum model. Those contributions are used to define global and local measures of hydrophobic similarity. The suitability of this computational strategy is examined for two series of compounds (ACAT inhibitors and 5-HT₃ receptor agonists), which are aligned to maximize the global hydrophobic similarity using a Monte Carlo-simulated protocol. Indeed, the concept of local hydrophobic similarity is used to explore structure–activity relationships in a series of COX-2 inhibitors. Inspection of the 3D distribution of hydrophobic/hydrophilic contributions in the aligned molecules is valuable to identify regions of very similar hydrophobicity, which can define pharmacophoric recognition patterns. Moreover, low similar regions permit to identify structural elements that modulate the differences in activity between molecules. Finally, the quantitative relationships found between the pharmacological activity and the hydrophobic similarity index points out that not only the global hydrophobicity, but its 3D distribution, is important to gain insight into the activity of molecules. J.M.M. and S.P. have contributed equally to this study.