Spontaneous Ga incorporation in ZnO nanowires epitaxially grown on GaN substrate

Surface‐diffusion‐induced spontaneous Ga incorporation process is demonstrated in ZnO nanowires grown on GaN substrate. Crucially, contrasting distributions of Ga atoms in axial and radial directions are experimentally observed. Ga atoms uniformly distribute along the ～10 μm long ZnO nanowire and show a rapidly gradient distribution in the radial direction, which is attributed substantially to the difference between surface and volume diffusion. The understanding on the incorporation process can potentially modulate doping and properties in semiconductor nanomaterials.

     

LLRF超导腔体控制系统的测试

中国科学院近代物理研究所自主研发的ADS注入器Ⅱ第一代高频低电平(LLRF)控制系统,工作频率为162.5 MHz;LLRF系统是由基于I/Q采样的正交解调技术构成的全数字闭环反馈控制系统,其主要功能是实现超导腔腔体电压幅值稳定控制、相位稳定控制与腔体谐振频率控制;LLRF控制系统在液氦温区超导腔上进行了系统稳定度和性能的在线测试,根据实验数据计算得超导腔体电压幅度稳定度为±3.4‰,相位稳定度为±0.3°,腔体表面峰值电场(Epk)能长时间稳定在25.1 MV/m。通过实验测试,检验了LLRF控制系统的性能,并对测试过程中出现的问题进行了分析,为将来超导腔LLRF控制系统运行积累了经验。     

Principal direction-based Hough transform for line detection

A robust and fast line detection method based on Hough transform (HT) is proposed in this paper. Edge pixels are extracted based on the summation and ratio of principal curvatures. Probabilistic sampling on the edge pixels is applied to reduce the count of voting. Then a one-to-one voting strategy is applied by taking advantages of the information of principal direction. The principal direction is also conducive for the successive accurate line segment extraction. The experiments demonstrate that the proposed method shows better locating accuracy and computation efficiency compared with several significant variations of HT.     

Wide-band circular polarization-keeping reflection mediated by metasurface

In this paper,we show that circular polarization-keeping reflection can be achieved using reflective metasurfaces.The underlying physical mechanism of the polarization-keeping reflection is analyzed using a reflection matrix.A wideband circular polarization-keeping reflector is demonstrated using N-shaped resonators.Both the simulation and experiment results show that the polarization-keeping reflection can be achieved with a high efficiency larger than 98%over the frequency range from 9.2 GHz to 17.7 GHz for both incident left-and right-handed circularly polarized waves.Under oblique incidence,the bandwidth increases as the incident angle varies from 0°to 80°. Moreover,the co-polarization reflection is independent of the incident azimuth angles.     

The electrochemical Peltier heats of Fe(CN) 6 3− /Fe(CN) 6 4− system at 295.15 K

A specially designed thermo-electrochemical calorimeter was applied to measure the electrochemical Peltier heats (EPH) of Fe(CN) ₆ ^3?/4? system at 295.15 K. The curves of the electrode potential changes and temperature changes against time for Fe(CN) ₆ ^3?/4? couple with five groups of different concentrations were obtained under the condition of various constant-current polarizations. The EPH values for the considered electrode reaction are determined to be ?41.31, ?42.73, ?44.28, ?45.87, and ?46.65 kJ mol^?1 at the respective concentrations of 0.125, 0.175, 0.225, 0.275, and 0.300 mol dm^?3; and the EPH and the apparent enthalpy change corresponding to the infinite dilution to be ?37.42 and ?84.10 kJ mol^?1 at 295.15 K, respectively.     

Organoclays from alkaline-treated acid-activated clays

The cetyltrimethylammonium hydroxide (C16TMAOH) solution was proposed for the preparation of organoclays. Montmorillonite clay was acid activated at different acid/clay (a/c) (in mass) ratios, then treated with alkaline (sodium hydroxide) solution before being reacted with C16TMAOH solution. The acid activation caused a reduction in the number of cation exchange sites, and hence improved the exfoliation of the silicate sheets at higher pH values. The basal spacing increased significantly from 2.20 to 4.01 nm, and depended on the a/c ratios. The acid-activated clays with a/c ratios greater than 0.3 adsorbed significant amounts of C16TMA cations with a basal spacing of 4.01 nm compared with the non-acid-activated montmorillonite (2.51 nm). Meanwhile, the treatment of NaOH solution yielded clays with similar properties to that of the raw used clay. The XRF data, FT-IR, and ²⁹Si MAS-NMR techniques confirmed that the resulting amorphous silica during the acid activation was dissolved, and accompanied by a dramatical reduction in the surface areas. Similar amounts of C16TMA cations were adsorbed, i.e., close to 1 mmol g^?1, with a single basal spacing of 2.52 nm, independently of the treated acid-activated clays. The in-situ powder XRD studies revealed that an increase of the basal spacing to 4.20 nm was observed at intermediate temperatures ranging from 50 to 150 °C for organo-acid-activated clays with basal spacing of 4.01 nm, while a continuous decrease of the basal spacing was observed for organoclays with a basal spacing of 2.52 nm. At higher temperatures greater than 250 °C, the decomposition of the surfactant occurs, and the basal spacing decreases to a value of about 1.4 nm.     

Electrochemical myoglobin biosensor based on carbon ionic liquid electrode modified with Fe3O4@SiO2 microsphere

In this paper, a Fe₃O₄@SiO₂ core-shell structure microsphere was synthesized and used to investigate the direct electron transfer of myoglobin (Mb) with a 1-butylpyridinium hexafluorophosphate based carbon ionic liquid electrode (CILE) as the substrate electrode. The mixture of Mb and Fe₃O₄@SiO₂ microsphere could form an organic–inorganic composite, which was immobilized on the surface of CILE with a chitosan (CS) film. Cyclic voltammetric experiments indicated that a pair of well-defined quasi-reversible redox peaks appeared on CS/Mb-Fe₃O₄@SiO₂/CILE with the formal peak potential (E ^0′) located at ?0.31 V (vs. saturated calomel electrode), which was corresponded to the electroactive center of Mb heme Fe(III)/Fe(II) redox couples. Direct electrochemical behaviors of Mb in CS-Fe₃O₄@SiO₂ composite film were carefully investigated with the electrochemical parameters calculated. The CS/Mb-Fe₃O₄@SiO₂/CILE showed good electrocatalytic behaviors to the reduction of trichloroacetic acid in the concentration range from 0.2 to 11.0 mmol L^?1 with the detection limit of 0.18 mmol L^?1 (3σ). Based on CS/Mb-Fe₃O₄@SiO₂/CILE, a new third-generation reagentless electrochemical biosensor was constructed with higher sensitivity and reproducibility.     

Large Hexagonal Bi‐ and Trilayer Graphene Single Crystals with Varied Interlayer Rotations

Bi‐ and trilayer graphene have attracted intensive interest due to their rich electronic and optical properties, which are dependent on interlayer rotations. However, the synthesis of high‐quality large‐size bi‐ and trilayer graphene single crystals still remains a challenge. Here, the synthesis of 100 μm pyramid‐like hexagonal bi‐ and trilayer graphene single‐crystal domains on Cu foils using chemical vapor deposition is reported. The as‐produced graphene domains show almost exclusively either 0° or 30° interlayer rotations. Raman spectroscopy, transmission electron microscopy, and Fourier‐transformed infrared spectroscopy were used to demonstrate that bilayer graphene domains with 0° interlayer stacking angles were Bernal stacked. Based on first‐principle calculations, it is proposed that rotations originate from the graphene nucleation at the Cu step, which explains the origin of the interlayer rotations and agrees well with the experimental observations.     

Metal‐Free Aminosulfonylation of Aryldiazonium Tetrafluoroborates with DABCO⋅(SO2)2 and Hydrazines

The coupling of aryldiazonium tetrafluoroborates, DABCO?(SO₂)₂, and hydrazines under metal‐free conditions leads to the formation of aryl N‐aminosulfonamides. The reaction proceeds smoothly at room temperature and shows broad functional‐group tolerance. A radical process is proposed for this transformation.     

A Doping Technique that Suppresses Undesirable H2 Evolution Derived from Overall Water Splitting in the Highly Selective Photocatalytic Conversion of CO2 in and by Water

Photocatalytic conversion of CO₂ to reduction products, such as CO, HCOOH, HCHO, CH₃OH, and CH₄, is one of the most attractive propositions for producing green energy by artificial photosynthesis. Herein, we found that Ga₂O₃ photocatalysts exhibit high conversion of CO₂. Doping of Zn species into Ga₂O₃ suppresses the H₂ evolution derived from overall water splitting and, consequently, Zn‐doped, Ag‐modified Ga₂O₃ exhibits higher selectivity toward CO evolution than bare, Ag‐modified Ga₂O₃. We observed stoichiometric amounts of evolved O₂ together with CO. Mass spectrometry clarified that the carbon source of the evolved CO is not the residual carbon species on the photocatalyst surface, but the CO₂ introduced in the gas phase. Doping of the photocatalyst with Zn is expected to ease the adsorption of CO₂ on the catalyst surface.