Nonvolatile photorefractive holographic recording in Sc:Ce:Cu:LiNbO3

In this paper experimental studies of nonvolatile photorefractive holographic recording in Ce:Cu:LiNbO₃ crystals doped with Sc(0,1,2,3 mol%) were carried out. The Sc:Ce:Cu:LiNbO₃ crystals were grown by the Czochralski method and oxidized in Nb₂O₅ powders. The nonvolatile holographic recording in Sc:Ce:Cu:LiNbO₃ crystals was realized by the two-photon fixed method. We found that the recording time of Sc:Ce:Cu:LiNbO₃ crystal became shorter with the increase of Sc doping concentration, especially doping with Sc(3 mol%), which exceeds the so-called threshold, and there was little loss of nonvolatile diffraction efficiencies between Sc(3 mol%):Ce:Cu:LiNbO₃ and Ce:Cu:LiNbO₃ crystals.     

The Synthesis of Glycoglycerolipids

A convenient synthetic route was developed for the synthesis of the novel glycolipids: 1,2-di-O-acyl-3-O-(2‘-acylamide-2‘-denxy-ct-D-glucopyranosyl)-sn-glycerols. 10 new compounds of glycolipids with different acyl groups were obtained.     

凸度量空间中单值和集值映象的公共不动点定理

§ 1.　Introduction　　Anecessaryandsufficientconditionandasufficientconditiontoensurethataset valuedmappingandasingle valuedmappinginacompletemetricspaceandacompleteconvexmetricspacehavingacommonfixedpointarerespectivelygivenin [1 ] .Meanwhilethemainresultsin[2 ]— [5]areimprovedandextendedin [1 ] .Inthispaper ,theexistenceatcommonfixedpointsoftwoset valuedmappingandasing valuedmappingwerestudied ,andthecorrespond ingresultsin [1 ]— [5]wereextendedandimproved .Let(X ,d)beanon emptymetricspa…     

Interfacial effects on stress distribution in model composites

Raman mechanical spectroscopy was used to examine interfacial effects on the stress distribution in model polydiacetylene fiber/epoxy composites. Epoxy release agents were coated on fiber surfaces to modify the interfacial adhesion properties. The modified fiber surfaces were then characterized by scanning electron microscopy and x-ray photoelectron spectroscopy as well as optical microscopy. No difference in the maximum stress value or stress distribution was observed for the two types of fibers, coated or uncoated, used in composites. This suggests that adhesion properties at the composite interface do not affect tensile stress transfer efficiency nor, therefore, the composite tensile modulus along the fiber axis direction in uniaxial composites. Experimental data were also compared with theoretical calculations assuming perfect bonding between fiber and matrix, and idealized frictional force transfer mechanism at the fiber–matrix interface.     

浅析欧洲绿党政治

上个世纪70年代以来，绿党在欧洲政坛崛起，这是欧洲社会政治变化的一个新现象。绿党力量的上升乃至绿党政治的出现在某种程度上改变了西欧国家现行的政党格局。研究绿党对于我们了解欧洲政治变化以及绿色思潮与生态政治的影响具有重要意义。     

非晶钛酸铋的晶化过程

利用差热分析、X射线衍射和透射电子显微镜等技术对溶胶-凝胶法合成的凝胶的晶化过程进行了分析，实验结果表明，Bi₄Ti₃O₁₂非晶凝胶晶化过程经历了四个过程：首先在433℃先形成了Bi₂O₃和TiO₂亚稳相，然后在488℃时TiO₂亚稳相与Bi₂O₃反应形成Bi，Ti复合氧化物亚稳相Bi₂T 关键词： 钛酸铋 铁电材料 溶胶凝胶 非晶 晶化过程     

透镜初级球差的横向剪切干涉条纹研究

利用玻璃平行平板构成简单的横向剪切干涉仪可以观察到单薄透镜形成的准直光束的剪切干涉条纹,由干涉条纹分布求出对应的几何像差和离焦量.用焦距为190 mm的单薄透镜做实验,实验结果与计算机模拟结果符合,说明可以从剪切干涉条纹的分布求出透镜的轴向调整误差和初级球差.     

自由基-分子反应:F+Propene(CH2CHCH3)的从头算研究

采用从头算CCSD(T)/6-311 G(2d,2p)//B3LYP/6-311G(d,p)方法,研究了自由基-分子反应F CH2CHCH3的各种不同的反应通道．该反应主要是通过复合物形成机制进行,即F分别加到碳碳双键的两端形成自由基复合物1和2．这两种亚稳态自由基会解离成三种产物:H C3H5F、CH3 C2H3F和HF C3H5．理论计算结果表明,生成CH3 C2H3F是反应的主要通道,而生成H C3H5F和HF C3H5对产物也有一定的贡献．这一结果和实验符合得很好．     

On Extracting Maximum Stable Sets in Perfect Graphs Using Lovász's Theta Function

We study the maximum stable set problem. For a given graph, we establish several transformations among feasible solutions of different formulations of Lovász's theta function. We propose reductions from feasible solutions corresponding to a graph to those corresponding to its induced subgraphs. We develop an efficient, polynomial-time algorithm to extract a maximum stable set in a perfect graph using the theta function. Our algorithm iteratively transforms an approximate solution of the semidefinite formulation of the theta function into an approximate solution of another formulation, which is then used to identify a vertex that belongs to a maximum stable set. The subgraph induced by that vertex and its neighbors is removed and the same procedure is repeated on successively smaller graphs. We establish that solving the theta problem up to an adaptively chosen, fairly rough accuracy suffices in order for the algorithm to work properly. Furthermore, our algorithm successfully employs a warm-start strategy to recompute the theta function on smaller subgraphs. Computational results demonstrate that our algorithm can efficiently extract maximum stable sets in comparable time it takes to solve the theta problem on the original graph to optimality. This work was supported in part by NSF through CAREER Grant DMI-0237415. Part of this work was performed while the first author was at the Department of Applied Mathematics and Statisticsat Stony Brook University, Stony Brook, NY, USA.