Application of sugaring-out extraction for the determination of sulfonamides in honey by high-performance liquid chromatography with fluorescence detection

A simple sugaring-out assisted liquid-liquid extraction method combined with high-performance liquid-chromatography with fluorescence detection (HPLC-FL) was developed for the extraction and determination of sulfonamides in honey. Sample preparation consisted of acid hydrolysis to release sugar-bound sulfonamides. After derivatization with fluorescamine, the derivatives were partitioned into the organic layer under the honey (sugar)/water/acetonitrile system. The clear organic extract obtained by centrifugation could be injected into the HPLC system either directly or after dilution. Linearity was obtained with the coefficient of determination (R(2)) higher than 0.998 from 2 to 200 ng/mL. Under the optimal conditions, recoveries were determined for honey fortified at three levels (5, 20, and 100 ng/g) were 80.9-99.6% with coefficients of variation of 0.3-4.4%. Limits of detection for the sulfonamides studied were found to range from 0.6 to 0.9 ng/g.     

Atomistic simulation of slow grain boundary motion

Existing atomistic simulation techniques to study grain boundary motion are usually limited to either high velocities or temperatures and are difficult to compare to realistic experimental conditions. Here we introduce an adapted simulation method that can access boundary velocities in the experimental range and extract mobilities in the zero driving force limit at temperatures as low as ～0.2T(m) (T(m) is the melting point). The method reveals three mechanistic regimes of boundary mobility at zero net velocity depending on the system temperature.     

Z箍缩丝阵负载区域的似稳态磁场分布

 将负载区域的电流（丝阵电流、阴极板电流、阳极板电流和回流柱电流）离散成电流线或电流面等电流微元,根据毕奥-萨伐尔定律,计算所有电流微元在指定场点的磁场,再通过叠加给出该点的总磁场。研究结果发现:在丝阵外围区域,仅由丝阵电流所产生的磁场偏离无限长直导线磁场公式的值,但全部电流所产生的总磁场与公式给出的值很接近。同时,研究了不同负载结构参数下的磁场分布,结果表明：增加丝根数有助于减小单根丝表面的局部磁场,改善丝阵外围磁场分布的均匀性。     

Volume polarization holographic recording in thick phenanthrenequinone-doped poly(methyl methacrylate) photopolymer

Volume polarization holographic recording in phenanthrenequinone-doped poly (methyl methacrylate) photopolymer is obtained. Photoinduced birefringence in a 2 mm thick sample is measured by a phase-modulated ellipsometry. The birefringence induced in this material by linearly polarized beam at 514 nm reaches 1.2×10(-5). In addition, ability for recording volume polarization grating using two different polarization configurations is demonstrated and compared. The experimental results show that the diffraction efficiency of the hologram reaches to ～40% by using two orthogonal circularly polarized beams.     

BIFURCATION ANALYSIS IN A GENERALIZED FRICTION MODEL WITH TIME-DELAYED FEEDBACK

In this paper, we consider a generalized model of the two friction models, both of which have two different types of control forces with time-delayed feedback proposed by Ashesh Sara et al. By taking the time delay as the bifurcation parameter, we discuss the local stability of the Hopf bifurcations. Under some condition, the generalized model harbors a phenomenon that the equilibrium may undergo finite switches from stability to instability to stability and finally become unstable. By applying the method introduced by Faria and Magalhaes, we compute the normal form on the center manifold to determine the direction and stability of the Hopf bifurcations. Numerical simulations are carried out and more than one periodic solutions may exist according to the bifurcation diagram given by BIFTOOL. Finally a brief conclusion is presented.     

An integrated inventory model with quality improvement and two-part credit policy

Trade credit financing plays a vital role in current business operations. Vendors extend payment dates to encourage sales, and buyers are not required to pay immediately after receiving products. This is equivalent to receiving a price reduction. Besides, buyers reduce their need for capital from bank loans. In addition, a number of defective products are produced during the production process. The number of defective items influences the on-hand inventory levels of buyers, service levels, and frequency of orders. To ensure that the analysis incorporates a realistic production environment, we developed an integrated inventory model with a two-part trade credit and considered an imperfect production process that can be improved by capital investment. The objective was to determine the optimal ordering, shipping, and quality improvement policies to maximize joint total profit. An iterative algorithm was established to determine the optimal strategy. Furthermore, a sensitivity analysis was conducted to examine the effects of changing parameter values on the optimal solution.     

Variable-rate colour image quantization based on quadtree segmentation

A novel variable-sized block encoding with threshold control for colour image quantization (CIQ) is presented in this paper. In CIQ, the colour palette used has a great influence on the reconstructed image quality. Typically, a higher image quality and a larger storage cost are obtained when a larger-sized palette is used in CIQ. To cut down the storage cost while preserving quality of the reconstructed images, the threshold control policy for quadtree segmentation is used in this paper. Experimental results show that the proposed method adaptively provides desired bit rates while having better image qualities comparing to CIQ with the usage of multiple palettes of different sizes.     

Discovery of New Natural Products by Intact‐Cell Mass Spectrometry and LC‐SPE‐NMR: Malbranpyrroles,Novel Polyketides from Thermophilic Fungus Malbranchea sulfurea

Six photosensitive polyketides, malbranpyrroles A–F, were discovered from the thermophilic fungus Malbranchea sulfurea by using intact‐cell desorption/ionization on silicon mass (ICD‐MS) and LC‐SPE‐NMR. These two strategies facilitate the searching and structural determination of unstable natural products. The ICD‐MS indicated that only brown hyphae of M. sulfurea can produce malbranpyrroles. The biosynthetic pathway of malbranpyrroles was evidenced by ¹³C isotope precursors and amino acid feeding experiments. The cytotoxicity data revealed that the conformation of the conjugated system in malbranpyrroles does not affect cytotoxic potency against cancer cell lines. In addition, the chlorine atom was shown to be the pharmacophore for cytotoxicity.     

Terahertz electromagnetic radiation from quantum wells

The observation of terahertz electromagnetic dipole radiation from quantum well structures has finally proven the existence of charge oscillations in semiconductors associated with wave packet dynamics. This article closely examines the physics behind the emission of terahertz electromagnetic radiation from excitonic charge oscillations in such quantum well structures, points out similarities and differences between the various generation schemes, and discusses the various relaxation mechanisms involved. Finally, we show how both amplitude and phase of charge oscillations and the corresponding terahertz emission can be manipulated using phase-locked optical pulses.     

Synthesis and characterization of novel aromatic poly(imide–benzoxazole) copolymers

New poly(imide–benzoxazole) copolymers were prepared directly from a dianhydride, a diacid chloride, and a bis(o‐diaminophenol) monomer in a two‐step method. In the first step, poly(amic acid–hydroxyamide) precursors were synthesized by low‐temperature solution polymerization in an organic solvent. Subsequently, the thermal cyclodehydration of the poly(amic acid–hydroxyamide) precursors at 350 °C produced the corresponding poly(imide–benzoxazole) copolymers. The inherent viscosities of the precursor polymers were around 0.19–0.33 dL/g. The cyclized poly(imide–benzoxazole) copolymers had glass‐transition temperatures in the range of 331–377 °C. The 5% weight loss temperatures ranged from 524 to 535 °C in nitrogen and from 500 to 514 °C in air. The poly(imide–benzoxazole) copolymers were amorphous, as evidenced by the wide‐angle X‐ray diffraction measurements. The structures of the precursor copolymers and the fully cyclized copolymers were characterized by Fourier transform infrared, ¹H NMR, and elemental analysis. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6020–6027, 2005