A hydrophobic deep eutectic solvent‐based vortex‐assisted dispersive liquid–liquid microextraction combined with HPLC for the determination of nitrite in water and biological samples

In recent years, hydrophobic deep eutectic solvents as new generation of green solvents have attracted wide attention in liquid microextraction technique. In this article, four hydrophobic deep eutectic solvents composed of trioctylmethylammonium chloride and oleic acid were designed and prepared firstly. Combined with high‐performance liquid chromatography, these deep eutectic solvents were used as an extraction solvent in vortex‐assisted dispersive liquid–liquid microextraction for the selective enrichment and indirect determination of trace nitrite from real water and biological samples. This method is based on the diazotization‐coupling reaction of nitrite with p‐nitroaniline and diphenylamine in acidic water, and then the nitrite is quantified indirectly by measuring the obtained azo compounds. Some factors influencing the extraction efficiency, including the reaction and extraction conditions, were investigated. Under the optimized conditions, the method has a linear range of 1–300 μg/L with a correlation coefficient of 0.9924, limit of detection of 0.2 μg/L, limit of quantitation of 1 μg/L, intraday and interday relative standard deviations of 4.0 and 6.0%. This method was successfully applied in determination of nitrite from three environmental water and two biological samples with the recovery in the range of 90.5–115.2%. In addition, these results were well agreement with those obtained by the conventional Griess method.     

电阻率与强度性能的关联及铜合金性能分区

铜合金以低电阻率为特征,由于电阻率与强度存在着共同的微观结构机理,两者往往协同变化,而导致难以对合金进行性能的全面评估和选材.本文以Cu-Ni-Mo合金作为研究对象,以团簇结构[Mo_1-Ni_(12)]构建固溶体的近程序结构模型,解析了电阻率和强度依赖于成分的定量变化规律,并定义了拉伸强度/电阻率的值为代表合金本质特性的"强阻比",得到了完全固溶态Cu-Ni-Mo合金的强阻比为7×10~8MPa/?·m,完全析出态的强阻比为(310—490)×10~8MPa/?·m.进而应用强阻比对常用铜合金进行了性能分区,给出铜合金材料选材的依据,得出了基于Cu-(Cr, Zr, Mg, Ag, Cd)等二元基础体系的铜合金适用于高强高导应用,而基于Cu-(Be, Ni, Sn, Fe, Zn, Ti, Al)等为基础二元体系的铜合金不能实现高强高导.该强阻比为310的特征性能分界线的发现为合金性能的全面评估提供了量化依据,可指导高强高导铜合金的选材和研发.     

Adaptive finite-time prescribed performance control for stochastic nonlinear systems with unknown virtual control coefficients

Nonlinear Dynamics - This paper is devoted to the adaptive finite-time prescribed performance control (FTPPC) for stochastic nonlinear systems with unknown virtual control coefficients (UVCCs),...     

1200 V碳化硅功率MOSFET低温特性的实验表征及分析

碳化硅功率MOSFET是宽禁带功率半导体器件的典型代表,具有优异的电气性能。基于低温环境下的应用需求,研究了1200 V碳化硅功率MOSFET在77.7 K至300 K温区的静/动态特性,定性分析了温度对碳化硅功率MOSFET性能的影响。实验结果显示,温度从300 K降低至77.7 K时,阈值电压上升177.24%,漏-源极击穿电压降低32.99%,栅极泄漏电流降低82.51%,导通电阻升高1142.28%,零栅压漏电流降低89.84%(300 K至125 K)。双脉冲测试显示,开通时间增大8.59%,关断时间降低16.86%,开关损耗增加48%。分析发现,碳化硅功率MOSFET较高的界面态密度和较差的沟道迁移率,是导致其在低温下性能劣化的主要原因。     

强点火作用下C3HF7对甲烷-空气爆炸的抑制

为解决瓦斯输送过程中的爆炸安全问题,探索寻找绿色环保且阻火性能优越的新型抑爆剂,开展了当量比下甲烷-空气预混气体爆炸传播过程中的七氟丙烷抑爆效果研究。实验采用长径比L/D=108的水平管道爆炸特性测试系统,研究了在强点火作用下不同体积分数的七氟丙烷对9.5%甲烷-空气预混气体最大爆炸压力、最大压力上升速率和火焰传播速度的影响。实验结果显示:将2.5 m长的管段作为七氟丙烷抑爆区时,七氟丙烷阻断9.5%甲烷-空气预混气体爆炸火焰传播的最小体积分数为5%;当七氟丙烷的体积分数为1%~4%时,不仅无法阻断爆炸火焰的传播,而且与对照组相比,会使火焰传播速度加快;当七氟丙烷的体积分数为1%~6%时,爆炸源及管道末端处的爆炸压力峰值随着七氟丙烷体积分数的增加而逐渐减小;当七氟丙烷的体积分数为3%时,抑爆区处的爆炸压力峰值与对照组相比增幅为10.9%。     

ZnS Nanospheres for Optical Modulator in an Erbium-Doped Fiber Laser

Zinc sulfide (ZnS), which belongs to transition metal monochalcogenides, is a semiconductor material with wide direct band gap. It can potentially show some special applications (such as luminescence, phosphor, sensors, infrared window materials, photocatalysis) by changing the morphology, size, and crystal structure of semiconductor materials. However, ZnS nanospheres have not been studied as optical modulators until now. Herein, ZnS nanospheres are synthesized by the hydrothermal method and are used to realize optical modulators in an Er-doped fiber laser. The evanescent field effect is utilized to incorporate the ZnS nanospheres on a tapered fiber. Furthermore, with the increase in pump power, the modulation interval gradually decreases to a minimum of 34.36 ns corresponding to the modulation frequency of 29.1 MHz, which is the highest modulation frequency to our knowledge in a ring cavity all-fiber laser. These results demonstrate ZnS nanospheres together with the interaction of dispersion and nonlinearity in optical fibers can modulate the proposed lasers. This not only provides a new method for controlling the power and frequency of all optical modulators, but also marks an important step for ZnS materials in optics research and device applications.     

Ligand-Enabled Nickel-Catalyzed Redox-Relay Migratory Hydroarylation of Alkenes with Arylborons

A redox-relay migratory hydroarylation of isomeric mixtures of olefins with arylboronic acids catalyzed by nickel complexes bearing diamine ligands is described. A range of structurally diverse 1,1-diarylalkanes, including those containing a 1,1-diarylated quaternary carbon, were obtained in excellent yields and with high regioselectivity. Preliminary experimental evidence supports the proposed non-dissociated chainwalking of aryl-nickel(II)-hydride species along the alkyl chain of alkenes before selective reductive elimination at a benzylic position. A catalyst loading as low as 0.5 mol % proved to be sufficient in large-scale synthesis while retaining high reactivity, highlighting the practical value of this transformation.     

Robust adaptive fractional-order observer for a class of fractional-order nonlinear systems with unknown parameters

Nonlinear Dynamics - This paper investigates the parameter and state estimation problems for a class of fractional-order nonlinear systems subject to the perturbation on the observer gain. The...     

椭圆截面弹体侵彻砂浆靶规律分析

为研究椭圆截面弹体侵彻混凝土靶规律，基于动态球形空腔膨胀理论，建立椭圆截面弹体侵彻受力模型，计算典型椭圆截面弹体阻力规律和侵彻砂浆靶深度。在此基础上，采用弹道炮发射平台，开展相同质量和长度的2种典型椭圆截面弹体及圆截面弹体垂直侵彻半无限砂浆靶实验。结果表明:理论模型能够反映椭圆截面弹体受力情况，并与实验研究结果吻合较好；椭圆截面弹体长短轴参数的改变对侵彻性能影响较为显著。