Adiabatic microcalorimeters for heat capacity measurement at low temperature

Technical problems in the design and construction of small sample adiabatic calorimeters are pointed out and solutions to them discussed. Two calorimeters constructed on the design principle are described with illustrative examples of data obtained with them. Hard and soft wares for fully automatic operation of the two calorimeters are described in some detail.     

Ferrocene-containing polymers. I. Radiation-induced polymerization of ferrocenylmethyl methacrylate

γ-Ray-induced polymerizations of ferrocenylmethyl methacrylate (FMMA) in crystalline and amorphous states were investigated with kinetical and ESR methods. In the crystalline state the polymerization of FMMA proceeded slowly and gave low-molecular-weight polymers, whereas in the amorphous state it proceeded rapidly and gave polymers of much higher molecular weight. Molecular weight distributions of these polymers were binodal. The temperature dependence and the dose-rate dependence of the polymerization rates were different between the two states. Wide-line nuclear magnetic resonance (NMR) spectra of the amorphous monomer suggested that the polymerization proceeded in a supercooled state. Electron spin resonance (ESR) spectra of γ-irradiated FMMA and 1,1′-ferrocenyl-di(methyl methacrylate) showed that ferrocene radicals and methacrylic radicals were formed simultaneously at low temperature; with increasing temperature the former radicals disappeared, whereas the latter changed into growing chain radicals. The yields of radicals were relatively low; this means that ferrocene groups in the monomers behave as a radiation energy absorber.     

Estimation of frequency- and time-dependence of polymer composite system by viscoelasticity in three dimensions

This paper is concerned with the comparison between mechanical properties of polymer composite system and those of each individual constituent. The comparison is mainly performed with respect to the viscoelastic Young's modulus and the relaxation Young's modulus. These mechanical constants may be obtained from the correspondence principle by applying the Laplace transform to the constitutive equation. The calculated results exhibit that the mechanical property of polymer composite system strongly depends on that of matrix with respect to frequency- and time-dependences. That is, as for the vibration and dynamic response in the steady state, the frequency-dependence of peak position about imaginary part of dynamic modulus of composite system is similar to that of matrix, while the magnitude of dynamic modulus depends on volume fraction of dispersed particles to total volume. As for the stress relaxation, the time-dependence of the relaxation Young's modulus of composite system resemble that of matrix each other, while the magnitude depends on the volume fraction of dispersed particles to total volume. This is due to the calculating condition that particle is assumed to be very rigid in comparison with matrix in this paper.     

Effect of molecular orientation distribution and crystallinity on the measurement of the crystal lattice modulus of nylon 6 by x-ray diffraction

The crystal lattice modulus of nylon 6 (-type) was measured by x-ray diffraction using nylon 6 films drawn up to five times. The measured crystal lattice modulus was 173–175 GPa for all specimens whose crystallinity and the Young's modulus were beyond 46% and 3.75 GPa, respectively. These results indicate that a state of homogenous stress can be achieved. In contrast, the values were scattered for the speciments whose crystallinity and Young's modulus are less than the above values. To study the origin, a numerical calculation of the crystal lattice modulus, as measured by x-ray diffraction, was carried out by considering effects on the orientation factors of molecular chains and crystallinity. In this calculation, a previously introduced model was employed, in which oriented crystalline layers are surrounded by oriented amorphous phases so that the strains of the two phases at the boundary are identical. The theoretical results calculated by the introduced model indicated that the crystal lattice modulus by x-ray diffraction is almost equal to the intrinsic crystal modulus if the morphology of the test specimen can be represented as a series model. In contrast, if a parallel model is more appropriate, the difference between the measured modulus and the intrinsic value can be pronounced. Such morphological dependence was found to be less pronounced with increasing high degree of molecular orientation and crystallinity.     

Recent developments on creation of artificial metalloenzymes

Organic synthesis using biocatalysts has been developed over many years and is still a prominent area of research. In this context, various hybrid biocatalysts composed of a synthetic metal complex catalyst and a protein scaffold (i.e. “artificial metalloenzymes”) have been constructed. One of the most recent research areas in biocatalysts-mediated synthesis is CC bond/cleavage, the most important type of reaction in organic chemistry. Some of the artificial enzymes were applied to in-cell reactions as well as in vitro systems. The effects of the structural fluctuation in biomacromolecules on their functions have also been realized. This review article includes recent research examples of artificial metalloenzymes used to CC bond formation/cleavage. As a perspective, we also focus on how we apply protein dynamics factor for the creation of new generation artificial metalloenzymes.     

Adsorption of anions to zirconium(IV) and titanium(IV) chemically immobilized on gel-phase

Adsorption behaviors of 25 anions to zirconium(IV) and titanium(IV) chemically immobilized on a gel-phase were studied by ion chromatography and by batch adsorption experiments. The affinities of Zr(IV) to iminodiacetate as an anchoring group and to anions as a sample are much stronger than those of Ti(IV). On a Zr(IV) column, fourteen anions showed no retention, four anions showed pH-dependent retention in a low pH region, and seven anions were irreversibly adsorbed at pH <7. In the last group, fluoride was adsorbed both by the ligand exchange mechanism and the addition mechanism, while phosphate, arsenate and selenite were only by the ligand exchange mechanism. The structures of the adsorbed species are discussed.     

Morphology and electric conductivity of cross-linked polyethylene–carbon black blends prepared by gelation/ crystallization from solutions

 Ultra-high-molecular-weight polyethylene (UHMWPE) – carbon black (CB) blends were prepared by gelation/ crystallization from PE dilute solutions containing CB particles. The UHMWPE/CB composition chosen were 1/0.15, 1/0.25, 1/0.5, 1/0.75, 1/1, 1/3, 1/5, and 1/9, etc. The cross-linking of PE chains was performed by chemical reaction of dicumyl-peroxide at 160 ^°C. X-ray diffraction patterns indicate that the crystallinity of PE within the blends decreased drastically through the chemical reaction at high temperature. The sample preparation method by gelation/crystallization provided the UHMWPE–CB system with various CB contents up to 90% and the conductivities for the resultant specimens were in the range from 10^-9 to 1 Ω^-1 cm^-1 corresponding to the electric conductivity range of semiconductors. The blends assured thermal stability of electric conductivity by cross-linking of PE chains, although the mechanical property such as the storage and loss moduli were very sensitive to temperature. The conductivity of the blends with CB content ≥20% were almost independent of temperature up to 220 ^°C and the values in the heating and cooling processes were almost the same. On the other hand, for the UHMWPE–CB blends with 13% CB content corresponding to the critical one, temperature dependence of electric resistivity showed positive temperature coefficient (PTC) effect. The PTC intensities for non-cross-linked and cross-linked materials were lower than that of the corresponding low-molecular-weight-polyethylene (LMWPE)–CB blend but the maximum peak appeared at 160 ^°C which is higher than the peak temperature of LMWPE–CB blend. Received: 10 December 1997 Accepted: 9 April 1998     

First chemical synthesis of triglucosylated tetradecasaccharide (Glc3Man9GlcNAc2), a common precursor of asparagine-linked oligosaccharides

Triglucosylated high-mannose-type tetradecasaccharide (Glc₃Man₉GlcNAc₂), the oligosaccharide part of the donor substrate of oligosaccharyl transferase (OST) complex, and diglucosylated tridecasaccharide (Glc₂Man₉GlcNAc₂) were synthesized. These oligosaccharides were assembled in a convergent and stereoselective manner. Undecasaccharide 5 was employed as the common intermediate, and coupling with trisaccharide (4) and disaccharide (3) donor afforded fully protected tetradeca-(17) and tridecasaccharide (16), respectively. These oligosaccharides were deprotected to give Glc₃Man₉GlcNAc₂ and Glc₂Man₉GlcNAc₂, respectively.