Chemically modified oximato complexes of titanium(IV) isopropoxide as new precursors for the sol-gel preparation of nano-sized titania: Crystal and molecular structure of [Ti{ONC10H16}4·2CH2Cl2]

Reactions of [Ti(OPrⁱ)₄] with various oximes, in anhydrous refluxing benzene yielded complexes of the type [Ti{OPrⁱ}_4−n{L}_n], where, n = 1-4 and LH = (CH₃)₂CNOH (1-4), C₉H₁₆CNOH (5-8) and C₉H₁₈CNOH (9-12). The compounds were characterized by elemental analyses, molecular weight measurements, FAB-mass, FT-IR and NMR (¹H, ¹³C{¹H}) spectral studies. The FAB-mass spectra of mono- (1), and di- (2), (6), (10) substituted products indicate their dimeric nature and that of tri- (3) and tetra- (4), (8) substituted derivatives suggest their monomeric nature. Crystal and molecular structure of [Ti{ONC₁₀H₁₆}₄·2CH₂Cl₂] (8A) suggests that the oximato ligands bind the metal in a dihapto η²-(N, O) manner, leading to the formation of an eight coordinated species. Thermogravimetric curves of (3), (6) and (10) exhibit multi-step decomposition with the formation of TiO₂ as the final product in each case, at 900 °C. Low temperature (∼600 °C) sol-gel transformations of (2), (3), (4), (6), (7) and (8) yielded nano-sized titania (a), (b), (c), (d), (e) and (f), respectively. Formation of anatase phase in all the titania samples was confirmed by powder XRD patterns, FT-IR and Raman spectroscopy. SEM images of (a), (b), (c), (d), (e) and (f) exhibit formation of nano-grains with agglomer like surface morphologies. Compositions of all the titania samples were investigated by EDX analyses. The absorption spectra of the two representative samples, (a) and (f) indicate an energy band gap of 3.17 eV and 3.75 eV, respectively.     

Structural investigations on new iron-acyl derivatives of B(C6F5)3

Reactions between [Fe(η-C₅H₅)(MeCO)(CO)(L)], L = PPh₃ (1), PMe₃ (2), PPhMe₂ (3), PCy₃ (4), CO (5), and B(C₆F₅)₃ give new complexes [Fe(η-C₅H₅){MeCOB(C₆F₅)₃}(CO)(L)] L = PPh₃ (7), PMe₃ (8), PPhMe₂ (9), PCy₃ (10), CO (11), where B(C₆F₅)₃ coordinates selectively to the O-acyl groups. Hydrolysis of 7 gives [Fe(η-C₅H₅){HOB(C₆F₅)₃}(CO)(PPh₃)] (6). The X-ray structures of 6, 8 and 11 have been determined. Calculations, using density functional theory, demonstrate that the charge transfer to the acyl group on Lewis acid coordination is more significant in the σ than the π system. Both effects lead to a lengthening of the acyl C-O bond thus π populations cannot be inferred from the distance changes.     

Synthesis and characterisation of six Fe(II or III), Co(II) or Zr(IV) complexes containing the ligand [CH(SiMe2R)P(Ph)2NSiMe3] (R = Me, NEt2) and of [Co{N(SiMe3)C(Ph)C(H)P(Ph)2NSiMe3}2]

The C,N-(trimethylsilyliminodiphenylphosphoranyl)silylmethylmetal complexes [Fe(L)₂] (3), [Co(L)₂] (4), [ZrCl₃(L)]·0.83CH₂Cl₂ (5), [Fe(L)₃] (6), [Fe(L′)₂] (7) and [Co(L′)₂] (8) have been prepared from the lithium compound Li[CH(SiMe₂R)P(Ph)₂NSiMe₃] [1a, (R = Me) {≡ Li(L)}; 1b, (R = NEt₂) {≡ Li(L′)}] and the appropriate metal chloride (or for 7, FeCl₃). From Li[N(SiMe₃)C(Ph)C(H)P(Ph)₂NSiMe₃] [≡ Li(L″)] (2), prepared in situ from Li(L) (1a) and PhCN, and CoCl₂ there was obtained bis(3-trimethylsilylimino- diphenylphosphoranyl-2-phenyl-N-trimethylsilyl-1-azaallyl-N,N′)cobalt(II) (9). These crystalline complexes 3-9 were characterised by their mass spectra, microanalyses, high spin magnetic moments (not 5) and for 5 multinuclear NMR solution spectra. The X-ray structure of 3 showed it to be a pseudotetrahedral bis(chelate), the iron atom at the spiro junction.     

Cyclopentadienyl tungsten complexes with thiocarboxylate and thiosulfonate ligands: Structures of CpW(CO)3SCOPh and CpW(CO)3SSO2-4-C6H4Cl

Treatment of the hydrosulfido tungsten complex CpW(CO)₃SH with acid chlorides (RCOCl) or sulfonyl chlorides (RSO₂Cl) affords CpW(CO)₃SCOR (1) [R = Me (a), CH₂Cl (b), Ph (c), 4-C₆H₄NO₂ (d)] and CpW(CO)₃SSO₂R (2) [R = Me (a), Ph (b), 4-C₆H₄Cl (c), 4-C₆H₄NO₂ (d)], respectively. The novel complexes, 1 and 2, were fully characterized by elemental analyses, IR and ¹H NMR spectroscopy. The solid state structures of CpW(CO)₃SCOPh (1c) and CpW(CO)₃SSO₂-4-C₆H₄Cl (2c) were determined by an X-ray crystal structure analysis.     

Reactions of P4S10 and pyPS2Cl with N,N′-diphenylurea and N,N′-diphenylthiourea

The reaction of P₄S₁₀ (1) with N,N′-diphenylurea (PhNH)₂CO (2) results in new heterocyclic compounds: the pyridinium salt of 1,3-diphenyl-2-sulfido-2-thioxo-1,3-diaza-2λ⁵-phosphetidine (3) (with a P–N–C–N cycle) and the pyridinium salt of 1,4-diphenyl-2,5-disulfido-2,5-dithioxo-1,4-dithiadiaza-2λ⁵,5λ⁵-diphosphinane (4), containing the (P–S–N)₂ cycle and the cyclic thiophosphates [pyH]₂[P₂S₈] (5), [pyH]₂[P₂S₇] (6) and [pyH]₃[P₃S₉] (7). A similar reaction, but carried out with N,N′-diphenylthiourea (PhNH)₂CS (8), leads to the formation of 4 and 6. pyPS₂Cl (9), used as an alternative starting material, also yields compounds 3, 4, 5, and further [pyH][PS₂Cl₂] (10) and S₈ after reaction with 2. Compound 3 reacts with Pd(CH₃COO)₂, with the formation of the complex [Pd(Ph₂N₂COPS₂)₂] (11). The crystal structures of 3 and 7 were determined by single-crystal X-ray diffraction.     

Synthesis and structures of crystalline lithium 1-azaallyls and a 1,3-diazaallyl derived from Li{CH(SiMe3)(SiMe3−n(OMe)n)} (n=1 or 2) and Li{CH(SiMe2OMe)2} and RCN (R=Bu, Ph, 2,5-Me2C6H3, or Ad)

Crystalline [Li{N(SiMe₂OMe)C(^tBu)C(H)(SiMe₃)}]₂ (5), [Li{N(SiMe₂OMe)C(Ph)C(H)(SiMe₃)}]₂ (6), [C(C₆H₃Me₂-2,5)C(H)(SiMe₃)}(TMEDA)](7), [Li{N(SiMe(OMe)₂)C(^tBu)C(H)(SiMe₃)}(THF)]₂ (8), Li{N(SiMe(OMe)₂)C(Ph)C(H)(SiMe₃)}(TMEDA) (9) and [Li{N(SiMe₂OMe)C(^tBu)C(H)(SiMe₂OMe)}]₂ (10) were readily obtained at ambient temperature from (i) [Li{CH(SiMe₃)(SiMe₂OMe)}]₈ (1) and an equivalent portion of RCN (R=^tBu (5), Ph (6) or 2,5-Me₂C₆H₃ (7)); (ii) [Li{CH(SiMe₃)(SiMe(OMe)₂)}]_∞ (2) and an equivalent portion of ^tBuCN (8) or PhCN (9); and (iii) [Li{CH(SiMe₂OMe)₂}]_∞ (3) and one equivalent of ^tBuCN (10). Reactions (i) and (ii) were regiospecific with SiMe_3−n(OMe)_n>SiMe₃ in 1,3-migration from C (in 1 or 2)→N. The 1-azaallyl ligand was bound to the lithium atom as a terminally bound κ¹-enamide (8 and 10), a bridging η³-1-azaallyl (6), or a bridging κ¹-enamide (5). The stereochemistry about the CC bond was Z for 5, 8 and 10 and E for 7. X-ray data are provided for 5, 6, 7, 8 and 10 and multinuclear NMR spectra data in C₆D₆ or C₆D₅CD₃ for each of 5-10.     

Comparative reactivity studies of dppf-containing CpRu and (C6Me6)Ru complexes towards different donor ligands (dppf=1,1-bis(diphenylphosphino)ferrocene)

[CpRu(dppf)Cl] (Cp=η⁵-C₅H₅) (1) and [(HMB)Ru(dppf)Cl]PF₆ ((HMB)=η⁶-C₆Me₆) (3) react with different donor ligands to give rise to N-, P- and S-bonded complexes. The stoichiometric reactions of 1 and 3 with NaNCS give the mononuclear complexes [CpRu(dppf)(NCS)] (2) and [(HMB)Ru(dppf)(NCS)]PF₆ (4), respectively, in yields above 80%, while 3 also gives a dppf-bridged diruthenium complex [(HMB)Ru(NCS)₂]₂(μ-dppf) (5) in 67% yield from reaction with four molar equivalents of NaNCS. Compound 5 is also obtained in 70% yield from the reaction of 4 with excess NaNCS. With CH₃CN in the presence of salts, both 1 and 3 give their analogous solvento derivatives [CpRu(dppf)(CH₃CN)]BPh₄ (6) and [(HMB)Ru(dppf)(CH₃CN)] (PF₆)₂ (7). With phosphines, the reaction of 1 gives chloro-displaced complexes [(CpRu(dppf)L]PF₆ (L =PMe₃ (8), PMe₂Ph(9)), whereas the reaction of 3 with PMe₂Ph leads to substitution of dppf, giving [(HMB)Ru(PMe₂Ph)₂Cl] PF₆ (10). The reaction of 1 with NaS₂CNEt₂ gives a dinuclear dppf-bridged complex [{CpRu(S₂CNEt₂)}₂(μ-dppf)] (11), whereas that of 3 results in loss of the HMB ligand giving a mononuclear complex [Ru(dppf)(S₂CNEt₂)₂] (12). With elemental sulfur S₈, 1 is oxidized to give a dinuclear CpRu^III dppf-chelated complex [{CpRu(dppf)}₂(μ-S₂)](BPh₄)Cl (13), whereas 3 undergoes oxidation at the ligand, giving a dppf-displaced complex [(HMB)Ru(CH₃CN)₂Cl]PF₆ (14) and free dppfS₂. The structures of 1, 2, 5-9, 11, 13 and 14 were established by X-ray single crystal diffraction analyses. Of these, 5 and 11 both contain a dppf-bridge between Ru^II centers, while 13 is a dinuclear CpRu^III disulfide-bridged complex; all the others are mononuclear. All complexes obtained were also spectroscopically characterized.     

Synthesis and reactivity of para-substituted benzoylmethyltellurium(II and IV) compounds: observation of intermolecular C-H-O hydrogen bonding in the crystal structure of (p-MeOC6H4COCH2)2TeBr2

Bis(p-substituted benzoylmethyl)tellurium dibromides, (p-YC₆H₄COCH₂)₂TeBr₂, (Y=H (1a), Me (1b), MeO (1c)) can be prepared either by direct insertion of elemental Te across C_Rf-Br bonds (where C_Rf refers to α-carbon of a functionalized organic moiety) or by the oxidative addition of bromine to (p-YC₆H₄COCH₂)₂Te (Y=H (2a), Me (2b), MeO (2c)). Bis(p-substituted benzoylmethyl)tellurium dichlorides, (p-YC₆H₄COCH₂)₂TeCl₂ (Y=H (3a), Me (3b), MeO (3c)), are prepared by the reaction of the bis(p-substituted benzoylmethyl)tellurides 2a-c with SO₂Cl₂, whereas the corresponding diiodides (p-YC₆H₄COCH₂)₂TeI₂ (Y=H (4a), Me (4b), MeO (4c)) can be obtained by the metathetical reaction of 1a-c with KI, or alternatively, by the oxidative addition of iodine to 2a-c. The reaction of 2a-c with allyl bromide affords the diorganotellurium dibromides 1a-c, rather than the expected triorganotelluronium bromides. Compounds 1-4 were characterized by elemental analyses, IR spectroscopy, ¹H, ¹³C and ¹²⁵Te NMR spectroscopy (solution and solid-state) and in case of 1c also by X-ray crystallography. (p-MeOC₆H₄COCH₂)₂TeBr₂ (1c) provides, a rare example, among organotellurium compounds, of a supramolecular architecture, where C-H-O hydrogen bonds appear to be the non-covalent intermolecular associative force that dominates the crystal packing.     

Evaluation of two chelators for labelling a PNA monomer with the fac-[Tc(CO)3] moiety

A PNA monomer containing thymine as nucleobase (1) was synthesized, characterized and coupled to the pyrazolyl containing ligand 3,5-Me₂pz(CH₂)₂N((CH₂)₃COOH)(CH₂)₂NHBoc (2) and to a modified cysteine S-(carboxymethyl-pentafluorphenyl)-N-[(trifluor)carbonyl]-l-cysteine methyl ester (3) yielding the bifunctional chelators 6 and 7, respectively. Reactions of 6 and 7 with the Re(I) tricarbonyl starting material [Re(CO)₃(H₂O)₃]Br afforded the complexes fac-[Re(CO)₃(κ³-6)]⁺ (8) and fac-[Re(CO)₃(κ³-7)] (9), respectively. The identity of 8 and 9 has been established based on IR spectroscopy, elemental analysis, ESI-MS spectrometry and HPLC. The multinuclear NMR spectroscopy (¹H, ¹³C, g-COSY, g-HSQC) has also been very informative in the case of complex 8, showing the presence of rotamers in solution. For 9 the NMR spectrum was too complex due to the presence of rotamers and diastereoisomers. The radioactive congeners of complexes 8 and 9, fac-[^99mTc(CO)₃(κ³-6)]⁺ (8a) and fac-[^99mTc(CO)³(κ³-7)] (9a), have been prepared by reacting the precursor fac-[^99mTc(CO)₃(H₂O)₃]⁺ with the corresponding ligands being their identity established by comparing their HPLC chromatograms with the HPLC of the rhenium surrogates.     

Heteroleptic tin (II) dialkoxides stabilized by intramolecular coordination Sn(OCH2CH2NMe2)(OR) (R = Me, Et, Pr, Bu, Ph). Synthesis, structure and catalytic activity in polyurethane synthesis

A straightforward method of synthesis of heteroleptic tin (II) alkoxides stabilized by one intramolecular coordination bond was developed. Addition of one equivalent of dimethylamino ethanol to diamide Sn(N(SiMe₃)₂)₂ (5) yields alkoxy-amido derivative Sn(OCH₂CH₂NMe₂)(N(SiMe₃)₂) (2). Further addition of alcohol leads to corresponding heteroleptic dialkoxides Sn(OCH₂CH₂NMe₂)(OR) (R = Me (6), Et (7), ⁱPr (8), ^tBu (9), Ph (10)). Catalytic activity of tin (II) compounds in polyurethane formation was tested.     

The thermally stable silylene Si[(NCH2Bu)2C6H4-1,2]: reaction with pyridine and quinoline

Two equivalents of the thermally stable silylene Si[(NCH₂Bu^t)₂C₆H₄-1,2] (1) react with pyridine to yield the 1-aza-2,3-disilacyclobutane derivative (2), which is labile and slowly rearranges via a 1,3-H shift to the 2-pyridyldisilane (3). A similar reaction of 1 with quinoline gives 1-aza-2,3-disilacyclobutane derivative (4), which is stable. The X-ray structures of 2 and 3 are discussed.     

Synthesis, characterization, and substituent effects of mononuclear ruthenium complexes [RuCl(CO)(PMe3)3(CHCH-C6H4-R-p)] (R = H, CH3, OCH3, NO2, NH2, NMe2)

A series of mononuclear ruthenium complexes [RuCl(CO)(PMe₃)₃(CHCH-C₆H₄-R-p)] (R = H (2a), CH₃ (2b), OCH₃ (2c), NO₂ (2d), NH₂ (2e), NMe₂ (2f)) has been prepared. The respective products have been characterized by elemental analyses, NMR spectrometry, and UV-Vis spectrophotometry. The structures of complexes 2c and 2d have been established by X-ray crystallography. Electrochemical studies have revealed that electron-releasing substituents facilitate monometallic ruthenium complex oxidation, and the substituent parameter values (σ) show a strong linear correlation with the anodic half-wave or oxidation peak potentials of the complexes.     

Synthesis and structure of halogen derivatives of 9-dimethylsulfonium-7,8-dicarba-nido-undecaborane [9-Me2S-7,8-C2B9H11]

Halogenation of 9-dimethylsulfonium-7,8-dicarba-nido-undecaborane [9-SMe₂-7,8-C₂B₉H₁₁] with N-chlorosuccinimide, bromine and iodine gave the expected corresponding halogen derivatives [9-SMe₂-11-X-7,8-C₂B₉H₁₀], where X = Cl (1), Br (2), I (3). In the bromination reaction, [9-SMe₂-6-Br-7,8-C₂B₉H₁₀] (4) was isolated as a minor product being the first example of substitution at a “lower” belt of the 7,8-dicarba-nido-undecaborate cage. The use of excess of bromine resulted in dibromo derivative [9-SMe₂-6,11-Br₂-7,8-C₂B₉H₉] (5). Structures of the compounds prepared were determined using ¹¹B-¹¹B COSY NMR spectroscopy (for all halogen derivatives) and single crystal X-ray diffraction (for compounds 2, 3, and 5).     

Oxygen replacement by fluorine in carbonyl derivatives of perfluoroaromatic compounds and isomerization of perfluoroindan-1,3-dione to perfluoro-3-methylenephthalide under the action of HF/SbF5

When acted upon by HF/SbF₅ at 95 °C, carbonyl groups of perfluorinated acetophenone (10), 3,4-dihydronaphthalen-1(2H)-one (8), 2,3-dihydronaphthalene-1,4-dione (9), benzocyclobutenone (6), benzocyclobutenedione (7) and indan-1-one (1) are converted into difluoromethylene groups to give the corresponding perfluoroaromatic products. Perfluoroindan-2-one (5), under the same conditions, is transformed to bis(perfluoroindan-2-yl) ether (21). On heating with HF/SbF₅, perfluoroindan-1,3-dione (2) isomerizes into perfluoro-3-methylenephthalide (4) at 95 °C, and gives 4,5,6,7-tetrafluoro-3-trifluoromethyl-phthalide (14) at 130 °C. Compound 4 in the absence of a solvent dimerizes giving perfluorodispiro[phthalide-3,1′-cyclobutane-2′,3″-phthalide] (18), and when heated with SbF₅ at 130 °C, it is converted into perfluoro-3-methylphthalide (3). When acted upon by HF/SbF₅ at 95 °C, perfluorinated benzoic acid (12) and phthalic anhydride (13) give the corresponding products with trifluoromethyl groups.     

Ruthenium-tin complexes from the reaction of HSnPh3 with Ru3(CO)10(NCMe)2 and their reactions with bis(tri-t-butylphosphine)platinum

The compounds Ru₃(CO)₉(SnPh₃)₂(NCMe)(μ-H)₂ (1), Ru₃(CO)₁₀(SnPh₃)₂(μ-H)₂ (2), Ru(CO)₄(SnPh₃)₂ (3) and Ru(CO)₄(SnPh₃)(H) (4) were obtained from the reaction of Ru₃(CO)₁₀(NCMe)₂ with HSnPh₃ in hexane solvent. Compounds 1, 3 and the new compound Ru₃(CO)₇(SnPh₃)₃(NCMe)₂(μ-H)₃ (5) were obtained from reaction of Ru₃(CO)₁₀(NCMe)₂ with HSnPh₃ in a CH₂Cl₂ and MeCN solvent mixture. Compound 2 and the new compound Ru₃(CO)₉(SnPh₃)₃(μ-H)₃ (6) were obtained from reactions of 1 and 5 with CO, respectively. Compounds 2 and 6 eliminated benzene when heated to yield Ru₃(CO)₁₀(μ-SnPh₂)₂ (7) and Ru₃(CO)₉(μ-SnPh₂)₃ (8) which contain bridging SnPh₂ ligands. Compound 7 was found to react with to yield the adduct, (9) in 59% yield by the addition of groups to two of the Ru-Sn bonds to the bridging SnPh₂ ligands. Fenske-Hall molecular orbital calculations were performed to provide an understanding of the metal-metal bonding in the clusters of 7 and 9. Compounds 1, 2, 5, 6, 7 and 9 were characterized structurally by single crystal X-ray diffraction analysis.     

Activation of 1,3,5-trimethyl-1,3,5-triazacyclohexane by Os3(CO)12 to form amidino [(MeN)2CH] cluster complexes

Reaction of 1,3,5-trimethyl-1,3,5-triazacyclohexane [(MeNCH₂)₃] with Os₃(CO)₁₂ in refluxing toluene results in C-H and C-N bond activation of the (MeNCH₂)₃ ligand to afford three amidino cluster complexes (μ-H)Os₃(CO)₁₀[μ,η²-CH(NMe)₂] (1), (μ-H)Os₃(CO)₉[μ₃,η²-CH(NMe)₂] (2), and Os₂(CO)₆[μ,η²-CH(NMe)₂]₂ (3). The controlled experiments show that thermolysis of 1 yields 2, and heating 2 in the presence of (MeNCH₂)₃ ligand produces 3. The molecular structures of 1 and 3 have been determined by an X-ray diffraction study.     

Syntheses, reactions, and structures of osmium(II) distannyl complexes, LnOs-SnMe2SnR3 (R = Me, Ph), from reaction between LnOs-SnClMe2 and either LiSnMe3 or KSnPh3

Reaction between Os(SnClMe₂)(κ²-S₂CNMe₂)(CO)(PPh₃)₂ and either LiSnMe₃ or KSnPh₃ produces the distannyl complexes, Os(SnMe₂SnMe₃)(κ²-S₂CNMe₂)(CO)(PPh₃)₂ (1) or Os(SnMe₂SnPh₃)(κ²-S₂CNMe₂)(CO)(PPh₃)₂ (3), respectively. Similarly, reaction between Os(SnClMe₂)Cl(CO)₂(PPh₃)₂ (6) and KSnPh₃ produces the distannyl complex, Os(SnMe₂SnPh₃)Cl(CO)₂(PPh₃)₂ (7). In the ¹¹⁹Sn NMR spectra of these stable osmium(II) distannyl complexes both the α-Sn and β-Sn atoms show well-resolved ¹¹⁹Sn-¹¹⁹Sn and ¹¹⁹Sn-¹¹⁷Sn coupling. Each of these three distannyl complexes can be selectively functionalised at the α-Sn atom by reaction with SnCl₂Me₂ giving Os(SnClMeSnMe₃)(κ²-S₂CNMe₂)(CO)(PPh₃)₂ (2), Os(SnClMeSnPh₃)(κ²-S₂CNMe₂)(CO)(PPh₃)₂ (4), and Os(SnClMeSnPh₃)Cl(CO)₂(PPh₃)₂ (8), respectively. Treatment of compounds 3 or 7 with iodine also cleaves one α-methyl group, selectively, to give Os(SnIMeSnPh₃)(κ²-S₂CNMe₂)(CO)(PPh₃)₂ (5), or Os(SnIMeSnPh₃)Cl(CO)₂(PPh₃)₂ (9). Crystal structures for complexes 3 and 7 have been determined.     

Polyhedral monocarbaborane chemistry : Reactions of the [6-Ph-nido-6-CB9H11] anion with two-electron donors to yield a series of neutral arachno and closo ten-vertex monocarbaborane derivatives

Reaction of the ten-vertex [6-Ph-nido-6-CB₉H₁₁]⁻ anion (1) with two-electron donor ligands L, where L is SMe₂, NH₂Ph, NC₅H₅, NC₅H₄-para-CH₂Ph, NC₅H₄-para-Ph or NC₉H₇ (where NC₉H₇ is quinoline) in the presence of {FeCl₃(OH₂)₆} gives the six neutral arachno ten-vertex monocarbaboranes [6-Ph-9-L-arachno-6-CB₉H₁₂], compounds 2, 3, 4, 7, 9 and 11, respectively, isolatable in yields of up to 63%. On prolonged treatment with {FeCl₃(OH₂)₆} oxidative cluster closure of the four compounds 4, 7, 9 and 11 that have pyridine-type ligands gives the neutral closo ten-vertex monocarbaboranes [1-Ph-6-L-closo-1-CB₉H₈], compounds 6, 8, 10 and 12, respectively, in yields of 49-92%. All new species 2, 3, 4, 6, 7, 8, 9, 10, 11 and 12 are characterised by single-crystal X-ray diffraction analysis and NMR spectroscopy. [This paper is an annotated exposition of parts of an oral presentation at the Third Pan-European Meeting of Boron Chemists, EUROBORON-3, Pruhonice, The Czech Republic, September 2004, of which the proceedings constitute this volume of Journal of Organometallic Chemistry.]     

Atom-efficient and environment-friendly multicomponent synthesis of amidoalkyl naphthols catalyzed by P2O5

An atom-efficient and environment-friendly approach for the synthesis of amidoalkyl naphthols (4a-x) via multicomponent one-pot reaction of 2-naphthol (1), aromatic aldehyde (2) and amide (3) catalyzed by P₂O₅ has been developed. The present approach offers several advantages such as reduced reaction times, moderate temperature, higher yields, eco-friendly reaction condition, easy purification and economic availability of the catalyst.     

Tin(IV) complexes obtained by reacting 2-benzoylpyridine-derived thiosemicarbazones with SnCl4 and Ph2SnCl2

Reaction of 2-benzoylpyridine thiosemicarbazone (H2Bz4DH, HL1) and its N(4)-methyl (H2Bz4Me, HL2) and N(4)-phenyl (H2Bz4Ph, HL3) derivatives with SnCl₄ and diphenyltin dichloride (Ph₂SnCl₂) gave [Sn(L1)Cl₃] (1), [Sn(L1)PhCl₂] (2), [Sn(L2)Cl₃] (3), (4) [Sn(L3)PhCl₂] (5) and [Sn(L3)Ph₂Cl] (6). Infrared and ¹H, ¹³C and ¹¹⁹Sn NMR spectra of 1-3, 5 and 6 are compatible with the presence of an anionic ligand attached to the metal through the N_py-N-S chelating system and formation of hexacoordinated tin complexes. The crystal structures of 1-3, 5 and 6 show that the geometry around the metal is a distorted octahedron formed by the thiosemicarbazone and either chlorides or chlorides and phenyl groups. The crystal structure of 4 reveals the presence of and trans [Ph₂SnCl₄]²⁻.