Boiling heat transfer characteristics of nanofluids in a flat heat pipe evaporator with micro-grooved heating surface

An experimental study was performed to understand the nucleate boiling heat transfer of water–CuO nanoparticles suspension (nanofluids) at different operating pressures and different nanoparticle mass concentrations. The experimental apparatus is a miniature flat heat pipe (MFHP) with micro-grooved heat transfer surface of its evaporator. The experimental results indicate that the operating pressure has great influence on the nucleate boiling characteristics in the MFHP evaporator. The heat transfer coefficient and the critical heat flux (CHF) of nanofluids increase greatly with decreasing pressure as compared with those of water. The heat transfer coefficient and the CHF of nanofluids can increase about 25% and 50%, respectively, at atmospheric pressure whereas about 100% and 150%, respectively, at the pressure of 7.4 kPa. Nanoparticle mass concentration also has significant influence on the boiling heat transfer and the CHF of nanofluids. The heat transfer coefficient and the CHF increase slowly with the increase of the nanoparticle mass concentration at low concentration conditions. However, when the nanoparticle mass concentration is over 1.0 wt%, the CHF enhancement is close to a constant number and the heat transfer coefficient deteriorates. There exists an optimum mass concentration for nanofluids which corresponds to the maximum heat transfer enhancement and this optimum mass concentration is 1.0 wt% at all test pressures. The experiment confirmed that the boiling heat transfer characteristics of the MFHP evaporator can evidently be strengthened by using water/CuO nanofluids.     

Probabilistic Teleportation of an Arbitrary Unknown Two-Qubit State via Positive Operator-Valued Measure and Two Non-maximally Entangled States

We present a scheme for probabilistically teleporting an arbitrary unknown two-qubit state through a quantum channel made up of two nonidentical non-maximally entangled states. In this scheme, the probabilistic teleportation is realized by using a proper positive operator-valued measure instead of usual projective measurement.     

Scheme for Deterministic Quantum Teleportation of an Arbitrary Two-Particle State via Two EPR Pairs in Cavity QED

A deterministic teleportation scheme for an arbitrary two-particle state is proposed in cavity QED. The success probability can reach 1.0. In addition, the scheme is insensitive to both the cavity decay and the thermal field.     

有限步扩散反应置限分形聚集

综合考虑扩散粒子浓度n、粒子扩散限制范围Δ、扩散粒子与种粒子或团簇相遇时，反应概率P及粒子扩散步数W的影响，提出了有限步扩散反应置限聚集的分形生长模型，模拟得到一系列典型的聚集生长图形，计算了相应的分形维数.结果表明，在粒子浓度n较小时，呈离散团簇状生长；而在粒子浓度较大时，则随反应概率P或粒子扩散步数W的增大，从离散团簇状生长转变为连续枝叉状生长. 关键词：     

低场脉冲核磁共振测定二醋酸纤维素丝束中油剂

研究了采用低场脉冲核磁共振(NMR)测定二醋酸纤维素丝束油剂的新方法，给出NMR法测定二醋酸纤维素丝束油荆含量的标准曲线。同时对NMR法测量二醋酸纤维素丝束油荆不确定度进行了评估。结果表明，NMR法具有分析速度快、无污染、无损伤和准确度高的优点，适合于二醋酸纤维素丝束油荆的分析。     

水溶性席夫碱型锰配合物的合成、表征及其模拟超氧化物歧化酶活性研究

以水杨醛为母体, 与胺类化合物缩合形成席夫碱配体, 用分子自组装法合成了一系列水溶性席夫碱型金属锰单核、双核配合物. 通过元素分析、红外光谱对配合物进行了表征, 采用邻苯三酚自氧化法测定了配合物的超氧化物歧化酶(SOD)活性. 结果表明, 这些水溶性锰配合物具有良好的SOD活性.     

液晶研究（Ⅰ）──4＇－酰基－4－羟基－1，1＇－联苯酯类液晶的合成与性质

以４＇－羟基联苯为原料合成了８种新型４＇－酰基－４－羟基联苯酯类化合物．除化合物５＿ｈ外，均为新的近晶相液晶化合物．它们具有较宽的相变温度范围和较高的热稳定性．用偏光显微镜和差热分析仪研究了它们的相行为，讨论了分子结构对液晶相行为的影响．     

虾仁中氯霉素残留量的气相色谱测定

建立了用配有电子俘获检测器(ECD)的气相色谱仪来测定虾仁中的氯霉素含量的方法.试样用乙酸乙酯提取,正己烷去杂,硅胶柱纯化,BSTFA+TMCS(99:1)试剂硅烷化.以GC ECD方式测定,外标法定量.当添加水平为0.2×10-9～1.0×10-9μg/kg时,回收率为70%～110%;相对标准偏差为1.0%～5.0%;线性相关系数r大于0.998.     

超细Sr2CeO4 粉体微乳液-高温法制备条件的正交试验及其发光性能研究

本文首先利用正交试验确定了微乳液-高温法合成蓝色发光Sr₂CeO₄超细粉体的最佳制备条件。接着研究了最佳条件下制备的Sr₂CeO₄超细粉体的性能。场发射扫描电镜(FE-SEM)显示，在850 ℃、900 ℃、1 000 ℃或者更高温度下退火4 h制备的粉体的形状分别呈球状、梭状和球状，平均粒径分别在100 nm左右和1 μm以内。X射线粉末衍射数据分析表明，该超细粉体属于正交晶系。室温下的光致发光光谱显示，该粉体的激发光谱有3个激发峰，主峰分别位于262 nm、281 nm和341 nm，而其发射光谱只呈现出1个发射峰，主峰位于约470 nm。与高温固相制备方法相比，微乳液-高温法可以在较低温度下制备出超细的粉体，而且它不但在262 nm处出现了一个新的激发峰，主激发峰和发射峰的位置也分别蓝移了大约30 nm和12 nm。     

葛根中葛根素的分离纯化技术进展

葛根素是葛根药材质量控制的主要指标。文章综述了近年来国内葛根提取物中葛根素的分离纯化技术进展。同时,指出β-环糊精键合固定相技术因具有绿色环保和低成本的优点,而成为发展的重点和方向。