High pressure Raman studies of 7,7,8,8-tetracyanoquinodimethane (TCNQ) and CuTCNQ

The high-pressure Raman studies of 7,7,8,8-tetracyanoquinodimethane (TCNQ) single crystals and polycrystalline CuTCNQ are presented in this paper. TCNQ shows a phase transition at 22 kbar, a pressure higher than reported earlier. CuTCNQ undergoes a first order phase transition at 30 kbar, which is characterized by the abrupt disappearance of all the Raman bands.     

Reactions of Tris(acetonitrile)tricarbonylchromium with Trimethylsilylarenes

The reactions of tris(acetonitrile)tricarbonylchromium 1 with trimethylsilyl derivatives 2–5 of phenalene, indene, 1,2-dihydronaphthalene and trans-β-methylstyrene gave products 10-13, respectively, containing no trimethylsilyl groups. The reactions of 1 with trimethylsilyl derivatives 6–8 of benzene, toluene and cycloheptatriene gave products 14–16, respectively, containing trimethylsilyl groups. The reaction of 1 with 1,2-bis(trimethylsily-1,2-dihydro)naphthalene 9 gave product 17 in which only trimethylsilyl at the allylic position was cleaved. Compound 10 crystallizes in the orthorhombic system, space group Pbca, with a = 12.228(4), b = 14.288(1), c = 15.128(3) Å, Z = 8, R_F= 0.046, and R_w = 0.047. X-ray crystallographic data confirm that the Cr(CO)₃ moiety is bonded to phenalene in a η⁶-mold.     

Dynamic study of photosensitized one-electron oxidation of polyG by menadione

Quinones including menadione are ubiquitous in nature. They play important roles in aerobic respira- tion and photosynthesis[1,2]. In addition, exogenous quinones are used as antibiotics and anticancer drugs. Their function is closely related to their red…     

FFC-1离子交换纤维物理化学性能的研究

利用扫描电镜、热失重-红外、元素分析、低温氮吸附等技术和化学手段对聚羧酸基FFC-1离子交换纤维的结构与性能特点等进行了系统研究．结果表明：FFC-1离子交换纤维为含适量酰肼类交联键的聚羧酸(钠)型离子交换材料，外比表面积大和传质距离短是其反应动力学性能优异的主要原因，FFC-1纤维具有良好的化学与热稳定性。在5mol/L硫酸、硝酸、盐酸和2mol／L氢氧化钠溶液中浸泡，交换容量未见明显降低。但过氧化氢溶液对其功能基有明显破坏，CO2为FFC-1纤维在高温区间(300℃～350℃)的主要分解产物。     

Trace determination of nitrated polycyclic aromatic hydrocarbons using liquid chromatography with on-line electrochemical reduction and fluorescence detection

An efficient clean-up procedure coupled with a high performance liquid chromatography (HPLC) with on-line electrochemical (EC) reduction and fluorescence detection (FLD) was developed to quantify nitrated polycyclic aromatic hydrocarbons (NPAHs) in the airborne particulate. In this process, NPAHs were extracted ultrasonically followed by analysis by using a reversed phase column with an aqueous eluent containing 70% aqueous acetonitrile and sodium monocholoroacetate as a buffer solution. The extraction efficiencies were above 83% for 1-nitropyrene and 1,3-dinitropyrene (1,3-DNP) 1,6-DNP, and 1,8-DNP, and calibration graphs were linear with very good correlation coefficients (r>0.999) and the detection limits were in the range of 1.0-2.2 pg for dinitropyrenes and nitropyrene. The proposed method provides a relatively simple and convenient procedure for determining the NPAHs samples in airborne particulate.     

New Host Molecules with Imidazoliums as Functional Arms:Syntheses and Anion Recognition

The bridged tri-imidazoliums 3.3X^--5.3X^-(X^-=PF6^-,Br^-,I^-)and bis-imidazoliums 6.2PF6^- were synthesized by N-quaternization of imidazole derivative 1 in acetonitrile under reflux.UV spectroscopic titration experiments showed that the halide salts and hexafluorophosphate salts of these imidazoliums exhibited good recognition toward anions in water and in acetonitrile,respectively.     

芥子气模拟剂2-氯乙基乙基硫醚的光催化降解

利用连续流动微反、原位红外和GC/MS等手段考察了芥子气模拟剂2-氯乙基乙基硫醚（2-CEES）在P25 TiO2上的光催化降解反应,证实CO2和H2O是这个反应的最终产物.详细的跟踪分析表明,除了CO2和H2O外,在反应的气相混合物中可检测到C2H4、CH3CHO、CH4、CO、HCl和H2S；少量小分子的羧酸、醚和砜；微量C2H5SC2H5、C2H5S2C2H5、C2H5SC2H4Cl和CH2ClCH2Cl等中间产物;在反应后的催化剂表面可检测到C2H5S2C2H5、C2H5SC2H4OH、C4H9S2C2H5和C2H5S2C2H4OH、等物.根据这些结果提出了2-CEES光催化降解的反应机理,推断2-CEES的光催化降解涉及脱氯、C－S键断裂、有机硫化物光聚合和裂解等复杂过程最终转化为CO2和H2O.认为各种硫物种在表面的积聚引起了催化剂的缓慢失活.     

Synthesis of Lanthanide Coordination Polymers with Benzophenone-4,4′-dicarboxylate： Effect of Lanthanide Contraction on Structures

Four lanthanide coordination polymers with benzophenone‐4,4′‐dicarboxylic acid (H₂bpndc) and 1,10‐phenanthroline (phen), [Ln₂(bpndc)₃(phen)] (Ln=La (1), Pr (2) and Tb (3)), [Yb(bpndc)₁₅(phen)].05H₂O (4) were obtained through solvothermal synthesis. The crystallographic data show that 1, 2, and 3 are isostructural, the Ln(III) ions in 1, 2 and 3 are all eight‐ and ten‐coordinated, respectively, and thus the Ln(III) ions are connected by bpndc ligands, resulting in an interpenetrating 3D structure. While in 4, the Yb(III) ions are eight‐coordinated and connected by bpndc ligands into a 3D structure with 1D rhombic channels, which result from the effect of lanthanide contraction from La(III) to Yb(III) ions, and the bpndc ligands in 1, 2, 3, and 4 display three types of coordination modes.     

Alkanethiolate self-assembled monolayers as functional spacers to resist protein adsorption upon Au-coated nerve microelectrode

Alkanethiolate self-assembled monolayers (SAMs) of varied chain lengths were adsorbed upon Au-coated nerve microelectrodes and employed as protein-resistant spacers. The microelectrode spiraled as a cuff type can be used for restoring motor function via electrical stimulation on the peripheral nerve system; however, an increase of electrode impedance might occur during implantation. In this work, a thin-film SAMs treatment upon Au/polyimide (PI) surface of the microelectrode provided a hydrophobic characteristic, which retarded protein adsorption at the initial stage and subsequent pileup (or thickening) process. The protein-resistant effect exhibited comparable SAMs of different chain lengths adsorbed upon Au/PI surfaces. The increase of electrode impedance as a function of protein deposition time was mainly correlated with the addition of reactance that was associated with the pileup thickness of the deposited protein. Particularly, the SAMs-modified surface was capable to detach a significant portion of the accumulated protein from the protein-deposited SAMs/Au/PI, whereas the protein-deposited layers exhibited firm adhesion upon Au/PI surface. It is therefore very promising to apply thin-film SAMs adsorbed upon Au-coated surface for bioinvasive devices that have the need of functional electrical stimulations or sensing nerve signals during chronic implantation.     

Thermal analysis of composites based on crystalline polymers and metals

Differential scanning calorimetry (DSC), thermogravimetric analysis (TG) and infrared (IR) spectroscopy have been used to examine the chemical and physical changes (crystallinity, accumulation of oxygen-containing groups, etc.) during thermal oxidation of polyethylene, polypropylene and Penton contained in coatings and metalfilled films, taking into account the thickness of the polymer layer and catalytic activity of the metal.

---

Zusammenfassung DSC, thermogravimetrische Analyse (TG) und infrarot (IR) Spektroskopie wurden zur Untersuchung der während der thermischen Oxidation von in Belägen und metallgefüllten Filmen enthaltenem Polyäthylen, Polypropylen und Penton stattfindenden chemischen und physikalischen Veränderungen (Kristallinität, Anhäufung stickstoffhaltiger Gruppen usw.) eingesetzt. Hierbei wurden die Stärke der Polymerschicht und die katalytische Aktivität des Metalls in Betracht genommen.

---

, (, .) , .