Determination of 1,3-, 1,6-, 1,8-dinitropyrene and 1-nitropyrene in airborne particulate by column liquid chromatography with electrochemical detection

Nitrated polycyclic aromatic hydrocarbons (NPAHs) in airborne particulate were determined by column liquid chromatography with electrochemical detection. NPAHs were extracted ultrasonically prior to being injected into the separation system. A reversed-phase C18 column was used to separate the NPAHs with an aqueous eluent containing acetonitrile and sodium monochloroacetate as buffer. Calibration graphs were linear with very good correlation coefficients (r>0.999) and the detection limits were ca. 20 pg for all analytes. The proposed method provides a relatively simple and convenient procedure for determining the NPAHs in airborne particulate.     

Retrospective analyses of atmospheric polycyclic and nitropolycyclic aromatic hydrocarbons in an industrial area of a western site of Japan.

Thirteen polycyclic aromatic hydrocarbons (PAHs) and four nitropolycyclic aromatic hydrocarbons (NPAHs) on the surfaces of airborne particulates, which were collected at an industrial area of a western site of Japan during periods from 1976 to 1998, were retrospectively analyzed. PAHs and NPAHs were extracted from airborne particulates using hexane with ultrasonication, and then analyzed by HPLC systems with fluorescence detection and chemiluminescence detection, respectively. The total concentrations (mean +/- SD, n = 34) were 15.54 +/- 21.24 ng/m3 for PAHs and 5.85 +/- 8.16 pg/m3 for NPAHs. The concentrations of PAHs and NPAHs were found to be highest during the period between 1979 and 1982, and then reduced. The annual concentrations of PAHs and NPAHs were highly correlated with those of air pollutants from motor vehicle origin, such as carbon monoxide, suspended particulates and non-methane hydrocarbons. The results suggested that motor vehicle emissions were one of the predominant sources of atmospheric PAHs and NPAHs.     

A selective optical chemical sensor for 2,6-dinitrophenol based on fluorescence quenching of a novel functional polymer

A bifurcated optical fiber based chemical sensor for continuous monitoring of 2,6-dinitrophenol (2,6-DNP) has been proposed based on the reversible chemical reaction between a novel functional poly(vinyl chloride) (PVC) as the sensing material and the analytes. The functional PVC (FPVC), containing a fluorescent curcumin moiety, was synthesized by the nucleophilic substitution of a fraction of the chlorine atoms bound to the PVC backbone by curcumin. When plasticized in a membrane of 5 μm thickness, FPVC extracts 2,6-DNP from aqueous solution into the bulk membrane phase and reacts with the analyte to form a complex with low fluorescence efficiency through hydrogen bonding. Formation of the complex gave a significant fluorescence quenching which is suitable for signalling the occurrence of the host-guest interaction. At pH 3.50, the sensor exhibits a dynamic detection range from 2.5 × 10⁻⁶ to 7.0 × 10⁻³ mol L⁻¹ with a limit of detection of 1.0 × 10⁻⁶ mol L⁻¹. As 2,6-DNP can provide an optimal space geometry matches to the formation of hydrogen bonds, the sensor shows excellent selectivity for 2,6-DNP over other nitrophenols. The forward and reverse response time (t₉₅) of the sensor both was within 1 min. The repeatability, reproducibility, and lifetime of the sensor were also satisfied. The sensor was applied to determine 2,6-DNP in water samples successfully.     

Synthesis of surface molecularly imprinted silica micro-particles in aqueous solution and the usage for selective off-line solid-phase extraction of 2,4-dinitrophenol from water matrixes

Very severe reaction conditions are required in the conventional synthesis of molecularly imprinted polymers (MIPs), which is unfavorable to their applications in chemical separation and analysis. A simple surface molecular imprinting approach was developed to synthesize MIP-coated SiO₂ micro-particles in aqueous solutions. The ¹H NMR and UV-vis spectroscopic analysis indicated that via hydrogen bonding, the functional monomer (o-phenylenediamine) can associate with the target (template) 2,4-dinitrophenol (2,4-DNP), as a model compound of organic pollutants, to form a precursor in aqueous solution. The copolymerization of this precursor and the free monomer was performed in the aqueous suspension of surface modified SiO₂ particles, leading to the formation of MIP-coated SiO₂ micro-particles. The MIP-coated silica particles were characterized with FT-IR, TGA, and UV-vis solid-state reflection spectroscopy, and were further demonstrated to have high adsorption capacity, excellent selectivity and site accessibility for 2,4-DNP. The new absorbent was successfully used in solid-phase extraction (SPE) to selectively enrich and determine 2,4-DNP in aqueous samples. The experimental results indicated that the MIP-SPE column yielded recoveries higher than 92% with R.S.D. <2.8%, much better than the commercial C₁₈-SPE column, which produced a recovery less than 30% with R.S.D. <3.0%.     

Speciation of antimony in airborne particulate matter using ultrasound probe fast extraction and analysis by HPLC-HG-AFS

A fast extraction procedure has been developed for Sb(III) and Sb(V) oxoanions speciation in airborne particulate matter samples. Different extraction media (diammonium tartrate, hidroxilammonium clorhidrate, citric acid + ascorbic acid, phosphoric acid and citrate solutions) were tried, with assistance of an ultrasonic probe. The operation power and time of extraction were also optimized. The higher extraction recoveries were obtained with a 100 mmol L⁻¹ hidroxilammonium clorhidrate aqueous solution assisted by the ultrasound probe operated at 50 W during 3 min. The extracts were analyzed by HPLC-HG-AFS. The chromatographic separation of Sb(III) and Sb(V) was also optimized using diammonium tartrate and phthalic acid as mobile phases. The separation of both Sb species was performed in less than 3 min under isocratic conditions, using a 200 mmol L⁻¹ diammonium tartrate solution. The proposed extraction procedure and the HPLC-HG-AFS instrumental coupling have been successfully applied to airborne particulate matter samples, with high Sb content, collected in heavy traffic streets from Buenos Aires (Argentina). The results showed the presence of both Sb species at similar concentrations in the ng m⁻³ level. The extraction yield was higher than 90% for all the analyzed samples.     

High-performance liquid chromatography-fluorescence determination of dinitropyrenes in soil after column chromatographic clean-up and on-line reduction.

In order to quantify 1,3-dinitropyrene (DNP), 1,6-DNP and 1,8-DNP in soil, we developed an efficient clean-up procedure and a sensitive determination method using fluorescence detection. DNP isomers were efficiently cleaned by three stages of fractionation, i.e., a silica gel open column chromatography using stepwise elution and two further purification steps by high-performance liquid chromatography (PPLC) using a monomeric-type octadecylsilyl (ODS) column and a polymeric-type ODS column. The recoveries of DNPs during the whole clean-up process were 94% or more. The fraction corresponding to DNPs was injected into an analytical polymeric-type ODS column for HPLC to separate DNP isomers. The effluent from the analytical ODS column was directly introduced to a catalyst column, which was packed with 5 microns alumina coated with platinum and rhodium (Pt-Rh), in order to reduce DNPs to diamino compounds, and then the fluorescence of diaminopyrenes was detected. The immediate detection of diaminopyrene isomers after on-line reduction afforded a sensitive detection of DNP isomers. The detection limits for DNPs were in the range of 0.7 to 4 pg. These developed methods were applied to four soil samples collected at parks in residential areas.     

Solid-phase extraction with C30 bonded silica for analysis of polycyclic aromatic hydrocarbons in airborne particulate matters by gas chromatography-mass spectrometry

A solid-phase extraction (SPE) method using triacontyl bonded silica (C30) as sorbent was developed for the determination of 16 US Environmental Protection Agency polycyclic aromatic hydrocarbons (PAHs) in airborne particulate matters quantitatively by gas chromatography-mass spectrometry (GC-MS). Optimization experiments were conducted using spiked standard aqueous solution of PAHs and real airborne particulates samples aiming to obtain highest SPE recoveries and extraction efficiency. Factors were studied in SPE procedures including the concentration of organic modifier, flow rate of sample loading and elution solvents. The ultrasonication time and solvents were also investigated. Recoveries were in the range of 68-107% for standard PAHs aqueous solution and 61-116% for real spiked sample. Limits of detection (LODs) and limits of quantification (LOQs) with standard solution were in the range of 0.0070-0.21 microgL(-1) and 0.022-0.67 microgL(-1), respectively. The optimized method was successfully applied to the determination of 16 PAHs in real airborne particulate matters.     

Determination of airborne particle-associated benz[a]anthracene-7,12-quinone using high-performance liquid chromatography with in-line reduction and fluorescence detection

A simple and sensitive method for measuring airborne particle-associated benz[a]anthracene-7,12-quinone (BaAQ) based on two-dimensional high-performance liquid chromatography (HPLC) with fluorescence detection was established. The system involves an ODS column for sample clean up, a 6-port switching valve, an ODS column for trapping the fraction containing BaAQ, an ODS column for sample separation, and a Pt-Rh catalytic column for reduction of BaAQ to a corresponding fluorescent compound. The accuracy of the assay, as applied to airborne particulate sample extracts spiked with known amounts of BaAQ was 94–108%. The detection limit was 97 fmol per injection (signal-to-noise ratio = 3), and the calibration range was from 1 to 100 pmol with excellent proportionality (R² = 0.9995). BaAQ in airborne particles collected in Osaka, Japan every 3 h was successfully measured using the established analytical method with simple sample preparation steps: ultrasonic extraction in organic solvent and concentration under reduced pressure and/or nitrogen stream.     

Determination of water soluble trace metals in airborne particulate matter using a dynamic extraction procedure with on-line inductively coupled plasma optical emission spectrometric detection

A novel continuous-flow system for the dynamic extraction of water soluble metal fractions in airborne particulate matter (APM) with subsequent inductively coupled plasma optical emission spectrometric (ICP-OES) analysis of derived extracts is presented. The fully automated extraction system with on-line multi-element detection offers enhanced sensitivity when compared to batch-wise counterparts; additionally it provides information about the extraction process. With the developed procedure detection limits in the order of 1.5 (Ba) to 8.0 (Ni) ng extractable mass per investigated sample could be achieved, which translates to method detection limits for soluble metal concentrations in APM ranging from 0.2 ng m⁻³ (Ba) to 0.9 ng m⁻³ (Fe). Reproducibility of analysis was determined by replicate measurement (n = 6) of an APM sample with an aerodynamic diameter ≤10 μm (PM10), derived results varied between 3.5% (Mn) and 12.1% (Ni) relative standard deviation. Method validation was accomplished by comparison of extracted soluble and remaining non-soluble fractions with the total metal contents of the investigated PM10 samples, showing an excellent mass balance for all elements. Application of the developed procedure for the analysis of water soluble metal fractions in PM10 samples (n = 16) from Linz (Austria) indicated a high variability of extractable fractions ranging from 11.7 ± 7.2% (Fe) to 48.8 ± 15.4% (Mn) of the total metal contents.     

Development of an analytical method for monitoring worker populations exposed to platinum-group elements

The increasing industrial use of platinum-group elements (PGEs), namely Ir, Pd, Pt and Rh, and related allergies such as rhinitis, conjunctivitis, asthma, urticaria and contact dermatitis, have led to a growing need to monitor selected populations of exposed workers. In this study, the levels of PGEs were measured in indoor airborne particulate matter and in biological samples taken from employees of a plant where car catalytic converters are produced and precious metals are recovered from spent carbon catalysts. The development of an analytical procedure based on quadrupole inductively coupled plasma mass spectrometry (Q-ICP-MS) for the analysis of PGEs in airborne particulate matter and on sector field inductively coupled plasma mass spectrometry (SF-ICP-MS) for the analysis of PGEs in blood, serum, urine and hair is described. For airborne particulate matter deposited on filters, the limits of detection (LoDs) were found to be 0.006 ng m⁻³, 0.020 ng m⁻³, 0.018 ng m⁻³ and 0.006 ng m⁻³ for Ir, Pd, Pt and Rh, respectively. Repeatability of measurements ranged from 1.8 to 8.5%, while recovery was in the range from 92 to 102%. For biological samples LoDs in blood, serum, urine and hair ranged from (in ng l⁻¹) 0.2–0.6 for Ir, 5–10 for Pd, 1–3 for Pt and 2–3 for Rh. For all biological materials, the repeatability varied from 1.1 to 12% for the four elements. Recovery data for the determination of PGEs in biological matrices were found to range from 84.0 to 107.8%. The method was applied to the determination of either total or respirable airborne PGEs collected from five different work areas in the plant. The difference between areas with high and low exposure correlates closely with metal levels in hair, blood and urine. The correlation coefficients between Pt in airborne particulate matter and Pt in biological materials was 0.994, 0.991 and 0.970 for blood, hair and urine, respectively.     

Simultaneous analysis of oxygenated and nitrated polycyclic aromatic hydrocarbons on standard reference material 1649a (urban dust) and on natural ambient air samples by gas chromatography-mass spectrometry with negative ion chemical ionisation

This study deals with the development of a routine analytical method using gas chromatography-mass spectrometry with negative ion chemical ionisation (GC/NICI-MS) for the determination of 17 nitrated polycyclic aromatic hydrocarbons (NPAHs) and 9 oxygenated polycyclic aromatic hydrocarbons (OPAHs) present at low concentrations in the atmosphere. This method includes a liquid chromatography purification procedure on solid-phase extraction (SPE) cartridge. Application of this analytical procedure has been performed on standard reference material (SRM 1649a: urban dust), giving results in good agreement with the few data available in the literature. The analytical method was also applied on ambient air samples (on both gas and particulate phases) from the French POVA program (POllution des Vallées Alpines). NPAHs concentrations observed for a rural site during the Winter period are about 0.2-100.0pgm(-3) in the particulate phase and about 0.0-20.0pgm(-3) in the gas phase. OPAHs present concentrations 10-100 times higher (0.1-2.0ngm(-3) and 0.0-1.4ngm(-3) for the particulate and the gas phases, respectively). These preliminary results show a good correlation between the characteristics of the sampling site and the compound origins (primary or secondary).     

Determination of atmospheric nitrobenzanthrones by high-performance liquid chromatography with chemiluminescence detection.

A method using high-performance liquid chromatography with chemiluminescence detection was developed for analyzing mutagenic nitrobenzanthrone (NBA) isomers in airborne particulates. The method was a modification of our previously described method for analyzing nitropolycyclic aromatic hydrocarbons (NPAHs). The pretreatment and reducing conditions for 1-, 2-, 3- and 10-NBAs were the same as those for NPAHs. In order to separate these NBA isomers, we used a polymeric-type ODS column (Cosmosil 5C-18MS); a mixture of 40% acetonitrile and 60% 10 mM imidazole-HClO4 buffer was employed as the mobile phase at a flow rate of 1 mL/min. The isomers of 1-, 2-, 3- and 10-NBA were determined in chemiluminescence with linear calibration graphs from 0.1 to 4 pmol, from 200 to 4000 pmol, from 1 to 50 pmol and from 10 to 400 pmol, respectively. The detection limits (S/N = 3) of 1-, 2-, 3- and 10-NBA isomers were 0.02 pmol, 35 pmol, 0.3 pmol and 3 pmol, respectively. The method was used to analyze airborne particulates at a heavy traffic site in Kanazawa. 2- and 3-NBAs were detected in the extracts of the particulates, while 1-NBA and 10-NBA were not detected. The atmospheric concentrations of 2- and 3-NBAs were 1.83 pmol/m3 and 24.7 fmol/m3, respectively.     

Electrochemical oxidation behavior of 2,4-dinitrophenol at hydroxylapatite film-modified glassy carbon electrode and its determination in water samples

Hydroxylapatite (HAP)-modified glassy carbon electrode (GCE) was fabricated and used to investigate the electrochemical oxidation behavior of 2,4-dinitrophenol (2,4-DNP) by cyclic voltammetry, differential pulse voltammetry, and chronocoulometry. The oxidation peak current of 2,4-DNP at the modified electrode was obviously increased compared with the bare GCE, indicating that HAP exhibits a remarkable enhancement effect on the electrochemical oxidation of 2,4-DNP. Based on this, a sensitive and simple electrochemical method was proposed for the determination of 2,4-DNP. The effects of HAP concentration, accumulation time, accumulation potential, pH, and scan rate were examined. Under optimal conditions, the oxidation peak current of 2,4-DNP was proportional to its concentration in the range from 2.0 × 10⁻⁶ to 6.0 × 10⁻⁴ M with a correlation coefficient of 0.9987. The detection limit was 7.5 × 10⁻⁷ M (S/N = 3). The proposed method was further applied to determine 2,4-DNP in water samples with recoveries from 96.75% to 106.50%.     

Determination of nitro-polycyclic aromatic hydrocarbons in atmospheric aerosols using HPLC fluorescence with a post-column derivatisation technique

The objective of this study was to develop an efficient and sensitive analytical protocol for the determination of nitrated polycyclic aromatic hydrocarbons (NPAHs) in aerosol samples. The separation of 16 NPAH (mono-and dinitro-PAH) was achieved by reversed-phase high-performance liquid chromatography (HPLC) followed by on-line reduction of the NPAHs to their corresponding amino polycyclic aromatic hydrocarbons (APAHs) and quantification by fluorescence detection. The main factors affecting the on-line reduction efficiency, such as the flow rate, the temperature, the position and packing of the reduction column were evaluated and optimised. The optimal conditions obtained were: packing of the reduction column with Pt-Al(2)O(3); a reduction column oven temperature of 90 degrees C; a flow rate of 0.8 mL min(-1). The resulting detection limits of the method ranged between 0.06 (2 NN) and 1.25 microg L(-1) (1.8 DNN), with an uncertainty of about 6%. The lifetime of the reduction column was identical to that of a typical analytical column. This analytical method was applied to particulate matter samples collected during December 2005 and August 2006 in Strasbourg (Alsace, eastern France). The NPAH concentrations observed for this urban site showed that the compounds are more abundant during winter (average of 534 pg m(-3)) than during summer (average of 118 pg m(-3)). 1-Nitropyrene was the predominant NPAH species, independent of season.     

Liquid–liquid microextraction in a multicommuted flow system for direct spectrophotometric determination of iodine value in biodiesel

A flow-based procedure was developed for the direct spectrophotometric determination of the iodine value (IV) in biodiesel. The procedure was based on the microextraction/reaction of unsaturated compounds with triiodide ions in an aqueous medium by inserting the reagent solution between the aliquots of biodiesel without any pretreatment. The interaction occurred through the biodiesel film formed on the inner walls of the hydrophobic tube used as the reactor and at the aqueous/biodiesel interfaces. The spectrophotometric detection was based on the discoloration of the I₃⁻ reagent in the aqueous phase by using a glass tube coupled to a fiber-optic spectrophotometer as the detection cell. Reference solutions were prepared by dilution of biodiesel samples with previously determined IV in hexane. The analytical response was linear for IV from 13 to 135 g I₂/100 g with a detection limit of 5 g I₂/100 g. A coefficient of variation of 1.7% (n = 10) and a sampling rate of 108 determinations per hour were achieved by consuming 224 μL of the sample and 200 μg of I₂ per determination. The slopes of analytical curves obtained with three different biodiesel samples were in agreement (variations in slopes lower than 3.1%), thus indicating an absence of any matrix effects. Results for biodiesel samples from different sources agreed with the volumetric official procedure at the 95% confidence level. The proposed procedure is therefore a simple, fast, and reliable alternative for estimating the iodine value of biodiesel.     

Fabrication and Characterization of Sulphur-doped Graphitic Carbon Nitride Nanosheets as a Highly Selective and Ultrasensitive Electrochemical Sensor for Detection of 2,4-Dinitrophenol in Real Gym Supplements

Herein, an effective template assisted calcination procedure has been adopted to synthesize the Sulphur-doped graphitic carbon nitride (S_XGCN). Furthermore, the S_XGCN/GCE was then utilized for the electrochemical determination of 2,4-Dinitrophenol (2,4-DNP). It has been inferred that among the variously prepared S_XGCN (x=0 %, 20 %, 40 %, 60 %, 80 %, and 100 %), S₈₀GCN afforded the excellent electrochemical response for detection of 2,4-DNP. The synthesized S_XGCN/GCE (x=80 %) demonstrates with a low detection limit of 0.9083 μM with linear range of 1–90 μM. Furthermore, the practical application of this sensor was successfully proved by detecting spiked 2,4-dinitrophenol in a real gym supplements sample.     

Improvement of an automatic HPLC system for nitropolycyclic aromatic hydrocarbons: removal of an interfering peak and increase in the number of analytes.

An automatic HPLC system for analyzing nitropolycyclic aromatic hydrocarbons (NPAHs, nitroarenes) in airborne particulates was previously described (Anal. Chim. Acta, 2001, 445, 20). Some problems with this system were that it generated a peak originating from an ascorbic acid solution that elutes at a retention time close to that of 1,6-dinitropyrene (DNP), and that it was able to analyze only 1,3-, 1,6-, 1,8-DNPs and 1-nitropyrene (I-NP). Here, we describe an improved system that effectively removes the interfering peak by introducing an ODS column just after the pump for the ascorbic acid solution, and which is capable of analyzing several additional compounds (2-, 4-NPs, 2-nitrofluorene. 6-nitrochrysene, 7-nitrobenz[a]anthracene, 3-nitroperylene and 6-nitrobenzo[a]pyrene etc.). The improved sensitivities were achieved by concentrating the compounds in a benzene-ethanol extract from airborne particulates, by increasing the loading time of the sample solution from 20 to 38 min, and by increasing the flow rate of an ascorbic acid solution from 1.3 to 1.8 mL/min.     

Optimization of an improved analytical method for the determination of 1-nitropyrene in milligram diesel soot samples by high-performance liquid chromatography-mass spectrometry

A method for determination of nitrated polycyclic aromatic hydrocarbons (NPAHs) in diesel soot by high-performance liquid chromatography-mass spectrometry with atmospheric pressure chemical ionization (APCI) and detection by ion-trap following ultrasonic extraction is described. The determination of 1-nitropyrene that it is the predominant NPAH in diesel soot was emphasized. Vaporization and drying temperatures of the APCI interface, electronic parameters of the MS detector and the analytical conditions in reversed-phase HPLC were optimized. The patterns of fragmentation of representative NPAHs were evaluated by single and multiple fragmentation steps and negative ionization led to the largest signals. The transition (247-->217) was employed for quantitative analysis of 1-nitropyrene. Calibration curves were linear between 1 and 15 microgL(-1) with correlation coefficients better than 0.999. Typical detection limit (DL) of 0.2 microgL(-1) was obtained. Samples of diesel soot and of the reference material (SRM-2975, NIST, USA) were extracted with methylene chloride. Recoveries were estimated by analysis of SRM 2975 and were between 82 and 105%. DL for 1-nitropyrene was better than 1.5 mg kg(-1), but the inclusion of an evaporation step in the sample processing procedure lowered the DL. The application of the method to diesel soot samples from bench motors showed levels 相似文献   

Determination of metals, metalloids and non-volatile ions in airborne particulate matter by a new two-step sequential leaching procedure Part B: Validation on equivalent real samples

Due to the lack of proper standard materials for airborne particulate matter collected on filters, a validation scheme was developed, which is here described, to the aim of testing the application of leaching procedures performing both ions and elemental determinations on real samples of airborne particulate matter collected on filters. The scheme has been developed on a two-step leaching method (extraction in acetate buffer and acid dissolution of residue) previously developed by authors and consists of two series of tests to be run on n pairs of equivalent parallel samples filter-collected. The first series of tests aims to assess on real samples the equivalence between results obtained by the tested procedure with those obtained by the EMEP ions extraction and the EN 12341 standard methods, whereas the second aims to evaluate the reproducibility of analytical results of elemental determination in the leached and dissolved fractions; in the latter case data reliability is also evaluated as a function of the environment-intrinsic variability of real samples.To avoid errors due to sampling differences data from filter pairs were standardized both by gravimetric determination of loaded filters, according to the EN 12341 standard and by the rate [SO₄²⁻]_A/[SO₄²⁻]_B, where [SO₄²⁻] indicate the soluble sulphate concentration in the extract; in the latter case values improved for all elements and in both fractions. Results of equivalence with standard methods and reproducibility tests are evaluated as mean relative percentage differences (Δ%) and percentage elements recoveries (R%). The application of the validation scheme to the two-step leaching method is here discussed for non-volatile ions and for 17 elements detected on 22 pairs of low-volume collected PM₁₀ samples on Teflon filters.     

Determination of water-soluble and insoluble compounds in size classified airborne particulate matter

The elemental composition of water soluble and acid soluble size-fractionated airborne particulate matter (APM) was investigated. PM2.5 and PM2.5-10 samples were collected every three days from October 2006 to October 2007 in Buenos Aires, Argentina. The collection was performed on Nucleopore® filters using a GENT sampler. Samples containing fine and coarse particles were subjected to an aqueous leaching to obtain information on the dissolution behaviors of ions, metal and metalloids. Key elements namely, Al, Ba, Ca, Cr, Cu, Fe, Mg, Mn, Pb, Se, Ti and Zn were determined in each fraction by inductively coupled plasma optical emission spectrometry (ICP OES). In the aqueous fractions, Cl⁻, SO₄²⁻, Na⁺ and NH₄⁺ were determined by high performance liquid chromatography (HPLC). A (6:2:5) mixture of nitric, hydrochloric and perchloric acids was used for leaching metals from the residual filters. For validation of the extraction procedure, the ICP OES measurements the Standard Reference Material NIST 1648 (Urban particulate matter) was subjected to the same analytical procedure that the samples loaded with APM. Total analyte concentration varied from 333.2 μg g^− 1 (equivalent to 3.7 ng m^− 3) for Ti to 692 mg g^− 1 (equivalent to 2.47 μg m^− 3) for Ca.