A simple LC‐MS method for determination of cyasterone in rat plasma: application to a pilot pharmacokinetic study

A simple, specific, and sensitive liquid chromatography–mass spectrometry (LC‐MS) method for determination of cyasterone in rat plasma was developed in our laboratory. Cucurbitacin B was used as an internal standard (IS). After protein precipitation with twofold volume of acetonitrile, the analyte and IS were separated on a Luna C₁₈ column (100 × 4.6 mm, i.d., 3.0 µm; Phenomenex) by isocratic elution with acetonitrile–water (80:20, v/v) as the mobile phase at a flow rate of 0.4 mL/min. An electrospray ionization source was applied and operated in the positive ion mode; selected ion monitoring scan mode was used for quantification, and the target ions m/z 543.3 for cyasterone and m/z 581.3 for IS were chosen. Good linearity was observed in the concentration range of 0.40–400 ng/mL for cyasterone in rat plasma. Intra‐day and inter‐day precision were both <7.4%. This method was proved to be suitable for pharmacokinetic studies after oral (5.0 mg/kg) or intravenous (0.5 mg/kg) administration of cyasterone in rats. Copyright © 2015 John Wiley & Sons, Ltd.     

Theoretical and experimental studies on a compact stretcher with large spectral bandwidth and high transmission efficiency

To ensure safe and effective amplification for the chirped pulse amplification laser facility, many factors such as pulse spectral width, pulse duration, grating parameters and incidence angle parameter are considered carefully in the design of the pulse stretcher. A compact four pass Offner stretcher design is given out. Experiment results show that the stretcher has broad spectral width, large stretching ratio and high transmission efficiency. By comparison, the calculated result of the dispersion effect on the pulse duration is completely consistent with the experiment result.     

Low band‐gap D–A conjugated copolymers based on anthradithiophene and diketopyrrolopyrrole for polymer solar cells and field‐effect transistors

Two conjugated copolymers PADT‐DPP and PADT‐FDPP based on anthradithiophene and diketopyrrolopyrrole, with thiophene and furan as the π‐conjugated bridge, respectively, were successfully synthesized and characterized. The number‐averaged molecular weights of the two polymers are 38.7 and 30.2 kg/mol, respectively. Polymers PADT‐DPP and PADT‐FDPP exhibit broad absorption bands and their optical band gaps are 1.44 and 1.50 eV, respectively. The highest occupied molecular orbital energy level of PADT‐DPP is located at ?5.03 eV while that of PADT‐FDPP is at ?5.16 eV. In field‐effect transistors, PADT‐DPP and PADT‐FDPP displayed hole mobilities of 4.7 × 10^?3 and 2.7 × 10^?3 cm²/(V s), respectively. In polymer solar cells, PADT‐DPP and PADT‐FDPP showed power conversion efficiency (PCE) of 3.44% and 0.29%, respectively. Atomic force microscopy revealed that the poor efficiency of PADT‐FDPP should be related to the large two‐phase separation in its active layer. If 1,8‐diiodooctane (DIO) was used as the solvent additive, the PCE of PADT‐DPP remained almost unchanged due to very limited morphology variation. However, the addition of DIO could remarkably elevate the PCE of PADT‐FDPP to 2.62% because of the greatly improved morphology. Our results suggest that the anthradithiophene as an electron‐donating polycyclic system is useful to construct new D–A alternating copolymers for efficient polymer solar cells. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1652–1661     

Effects of ultrasonic field on structure evolution of Ni film electrodeposited by bubble template method for hydrogen evolution electrocatalysis

Journal of Solid State Electrochemistry - Self-supporting porous Ni film with uniform honeycomb-like micropores and a thickness of up to 66&nbsp;μm is electrodeposited by dynamic hydrogen...     

LWE from non-commutative group rings

Designs, Codes and Cryptography - The Learning-With-Errors (LWE) problem (and its variants including Ring-LWE and Module-LWE), whose security are based on hard ideal lattice problems, has proven to...     

基于压缩全息和空分复用的多彩色图像加密

针对现有光学加密方法进行彩色图像加密时加密容量低、解密图像失真度高等问题,提出一种基于压缩全息和空分复用的多彩色图像加密方法.在光学加密阶段,结合改进的Mach-Zehnder干涉仪与空分复用技术,通过不同的随机相位掩膜对多幅彩色图像进行同时加密,仅需单次曝光即可得到由多幅彩色图像加密的全息图.在解密过程中,由于记录全息图的过程可建模为压缩感知过程,使用两步迭代收缩/阈值算法即可求解.实验结果表明,提出的加密系统加密容量大,解密重建图像质量高,结合压缩感知理论,有效地消除了同轴全息中平方场项对解密重建性能的影响,解密图像平均峰值信噪比仅下降约2～5dB;密钥安全性高,随机相位掩膜与传播距离均起到密钥的作用,在随机相位掩膜错误或传播距离仅偏移0.25%时,便无法解密出原始彩色图像;且对噪声与遮挡性攻击具有良好的鲁棒性,解密重建性能随噪声增大下降趋势缓慢,加密全息图80%信息受到遮挡性攻击时,仍可取得良好的解密重建结果.     

非齐次动力学方程的一种精细积分单步方法

针对非齐次动力学方程■,结合精细积分法和微分求积法,利用同阶的显式龙格-库塔法对计算过程中待求的v_(k+i/s)(i=1,2,…,s)进行预估,提出了一种避免状态矩阵求逆的高效精细积分单步方法。该方法采用精细积分法计算e~(Ht),而Duhamel积分项采用s级s阶的时域微分求积法,计算格式统一且易于编程,可灵活实现变阶变步长。仿真结果表明,与其他单步法及预估校正-辛时间子域法进行数值比较,该方法具有高精度、高效率及良好的稳定性,在求解大规模动力系统时间响应问题中具有较大的优势。     

Two novel d10 transition metal complexes based on 1H‐benzimidazole‐5,6‐dicarboxylic acid: Synthesis,structure and multifunctional luminescence detection

Two new coordination complexes based on benzimidazole dicarboxylic acid, Zn(Hbidc)?H₂O ( 1 ) and Cd(Hbidc)(H₂O) ( 2 ), have been synthesized under hydrothermal conditions. The complexes were characterized using elemental analysis, infrared and UV–visible spectroscopies, powder X‐ray diffraction, thermogravimetry and single‐crystal X‐ray diffraction. Structural analyses showed that the crystal structures of 1 and 2 are different, due to the various modes of linking of the benzimidazole dicarboxylic acid. Complex 1 has a two‐dimensional network structure and 2 has a three‐dimensional network structure. In addition, we studied the performance of the fluorescence response of two complexes. Results showed that the complexes can be used as chemical sensors for multifunctional testing, such as for UO₂²⁺, xanthine and Fe³⁺ ions. Even if the concentration is very low, they could also be detected, showing that coordination complexes 1 and 2 have very high fluorescence sensitivity. The detection limit for UO₂²⁺ is 5.42 nM ( 1 ) and 0.02 nM ( 2 ), that for xanthine is 1.37 nM ( 1 ) and 0.28 nM ( 2 ), and that for Fe³⁺ ions is 0.76 nM ( 1 ) and 0.62 nM ( 2 ).     

Lithium–Lanthanide Bimetallic Metal–Organic Frameworks towards Negative Electrode Materials for Lithium-Ion Batteries

Novel lithium–lanthanide (Ln: cerium and praseodymium) bimetallic coordination polymers with formulas C₁₀H₂LnLiO₈ (Ln: Ce (CeLipma) and Pr (PrLipma)) and C₁₀H₃CeO₈ (Cepma) were prepared through a simple hydrothermal method. The three compounds were characterized by means of FTIR spectroscopy, X-ray diffraction, single-crystal X-ray diffraction, SEM, TEM, and X-ray photoelectron spectroscopy. The results of structural refinement show that they belong to triclinic symmetry and P space group with cerium (or praseodymium) and lithium cations, forming coordination bonds to oxygen atoms from different pyromellitic acid molecules, and leading to the construction of 3D structures. It is interesting to note that the frameworks exclude any coordination water and lattice water. As an electrode material for lithium-ion batteries, CeLipma exhibits a maximum capacity of 800.5 mAh g⁻¹ and a retention of 91.4 % after 50 cycles at a current density of 100 mA g⁻¹. The favorable electrochemical properties of the lanthanide coordination polymers show potential application prospects in the field of electrode materials.     

Rhodium(III)-Catalyzed C−H/N−H Functionalization with Hydrogen Evolution

A rhodium(III)-catalyzed C−H/N−H bond functionalization of benzimidates with α-chloroaldehydes to afford isoquinolin-3-ol derivatives is reported. No external oxidants are needed in this process, and interestingly, evolution of hydrogen gas is observed.