Temperature dependence of the iron hyperfine field distribution in amorphous Fe-rich Fe-Zr alloys

The temperature dependence of the iron hyperfine field distribution is reported in melt-quenched amorphous Fe-Zr alloys. The most remarkable feature is the compositinal change in the shape of the average hyperfine field versus temperature curves. The unusual increase in the average hyperfine field below about 85 K is a characteristic feature of the RSG systems; however, no anomaly is observed in the width of the hyperfine field distribution as a function of temperature. The results cannot be properly explained in the framework of the existing spin glass models.     

A New Flow Instrument for Conductance Measurements at Elevated Temperatures and Pressures: Measurements on NaCl(aq) to 458 K and 1.4 MPa

A new flow electrical conductance instrument was constructed and tested on dilute NaCl solutions up to 458 K, and on more concentrated solutions (maximum 0.436 mol⋅kg⁻¹) at 373 K. The results of the new instrument agreed with those of previous authors within the estimated experimental errors. The model of Bernard et al. (J. Phys. Chem. 96, 3833–3840 (1992), MSA) was found to represent the high-temperature results without introducing an ion-pairing equilibrium constant. The Fuoss–Hsia conductance equation as given by Fernandez-Prini was found to represent the dilute concentrations with Λ° (NaCl) as the only adjustable parameter. It was found that Λ° (NaCl) could be expressed as a function of solvent viscosity and density by using three parameters found by regression of literature results between 278.15 and 523 K. This equation along with the FHFP theory permits the equivalent conductivity of dilute sodium chloride solutions to be calculated within the accuracy of the existing experimental measurements.     

Mössbauer study of nanodimensional nickel ferrite – mechanochemical synthesis and catalytic properties

Iron–nickel spinel oxide NiFe₂O₄ nanoparticles have been prepared by the combination of chemical precipitation and subsequent mechanical milling. For comparison, their analogue obtained by thermal synthesis is also studied. Phase composition and structural properties of iron–nickel oxides are investigated by X-ray diffraction and Mössbauer spectroscopy. Their catalytic behavior in methanol decomposition to CO and methane is tested. An influence of the preparation method on the reduction and catalytic properties of iron–nickel samples is established.     

Synthesis and characterization of functional gradient copolymers of allyl methacrylate and butyl acrylate

Functional spontaneous gradient copolymers of allyl methacrylate (A) and butyl acrylate (B) were synthesized via atom transfer radical polymerization. The copolymerization reactions were carried out in toluene solutions at 100 °C with methyl 2‐bromopropionate as the initiator and copper bromide with N,N,N′,N″,N″‐pentamethyldiethylenetriamine as the catalyst system. Different aspects of the statistical reaction copolymerizations, such as the kinetic behavior, crosslinking density, and gel fraction, were studied. The gel data were compared with Flory's gelation theory, and the sol fractions of the synthesized copolymers were characterized by size exclusion chromatography and nuclear magnetic resonance spectroscopy. The copolymer composition, demonstrating the gradient character of the copolymers, and the microstructure were analyzed. The experimental data agreed well with data calculated with the Mayo–Lewis terminal model and Bernoullian statistics, with monomer reactivity ratios of 2.58 ± 0.37 and 0.51 ± 0.05 for A and B, respectively, an isotacticity parameter for A of 0.24, and a coisotacticity parameter of 0.33. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5304–5315, 2006     

Divinylsiloxane‐bisbenzocyclobutene‐based polymer modified with polystyrene–polybutadiene–polystyrene triblock copolymers

Divinylsiloxane‐bisbenzocyclobutene (DVS‐bisBCB) polymer has very low dielectric constant and dissipation factor, good thermal stability, and high chemical resistance. The fracture toughness of the thermoset polymer is moderate due to its high crosslink density. A thermoplastic elastomer, polystyrene–polybutadiene–polystyrene triblock copolymer, was incorporated into the matrix to enhance its toughness. The cured thermoset matrix showed different morphology when the elastomer was added to the B‐staged prepolymer or when the elastomer was B‐staged with the DVS‐bisBCB monomer. Small and uniformly distributed elastomer domains were detected by transmission electron micrographs (TEM) in the former case, but TEM did not detect a separate domain in the latter case. A high percentage of the polystyrene–polybutadiene–polystyrene triblock copolymer could be incorporated into the DVS‐bisBCB thermoset matrix by B‐staging the triblock copolymer with the BCB monomer. The elastomer increased the fracture toughness of DVS‐bisBCB polymer as indicated by enhanced elongation at break and increased K1c values obtained by the modified edge‐lift‐off test. Elastomer modified DVS‐bisBCB maintained excellent electrical properties, high T_g and good thermal stability, but showed higher coefficient of linear thermal expansion values. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1591–1599, 2006     

A New Differential Method Applied to the Study of Arbitrary Cross Section Microstructured Optical Fibers

The present work adapts a recent grating theory called “Fast Fourier factorization” to cylindrical coordinates in order to study microstructured optical fibers (MOFs). Compared with the classical differential method, this new differential method takes into account the truncation of Fourier series and the discontinuities of the fields across the diffracting surface with the help of new factorization rules. The main advantage of this method is that the directrix of the diffracting cylindrical surface is arbitrary and permits anisotropic and inhomogeneous media although its numerical application needs longer computation time, compared with other well-known numerical methods. The S-propagation algorithm is used to avoid numerical contaminations. The numerical results are validated and compared with the well-established Multipole method in the case of a MOF with six circular cylinders. Further, a new cross-sectional profile (with sectorial inclusions) that the Multipole method cannot consider is studied.     

The ALTO project at IPN-Orsay

The availability of both a tandem deuteron beam and a linac electron beam, the latter converted into Bremsstrahlung, at the new ALTO facility at IPN-Orsay offers a unique opportunity to compare the performance of a laser ion guide under different regimes. The ALTO accelerator has delivered its first electron beam at the end of 2005 and a design for a gas-cell prototype is being studied.     

Evaluating the financial performance of bank branches

We evaluate the financial performance of most of the branch offices of a large European savings bank for a recent accounting period. We employ a complementary pair of nonparametric techniques to evaluate their financial performance, in terms of their ability to conserve on the expenses they incur in building their customer bases and providing customer services. We find variation in the ability of branch offices to perform this task, and agreement on the identity of the laggard branches. We then employ parametric techniques to determine that the list of indicators on which their financial performance is evaluated can be reduced without statistically significant loss of information to bank management. Both findings suggest ways in which the bank can increase the profitability of its branch network. A previous version of this paper was presented at CORE, Université Catholique de Louvain, Louvain-la-Neuve, Belgium, where we received many helpful comments from the audience. We are grateful to three referees for their helpful comments as well.     

Thickness dependence of the magnetic anisotropy of Fe layers separated by Al

Magnetic multilayers of ⁵⁷Fe with nominal thickness, T _nom, between 0.4 and 1.0 nm separated by 3.0 nm Al spacer layers were prepared by alternate deposition of the constituents in high vacuum. The samples were investigated at 4.2 K in external magnetic field. A fraction of Fe atoms corresponding to about 0.3 nm equivalent Fe-thickness was found to mix into the Al spacer. The extremely strong magnetic anisotropy observed for T _nom < 0.8 nm is attributed to Fe layers of approximately two atomic planes thick. The anisotropy decreases considerably after the building up of the third Fe atomic layer starts at T _nom = 0.8 nm, but full saturation was not achieved even for T _nom = 1 nm and 3 T magnetic field applied perpendicularly to the sample plane.