A facile synthesis of highly functionalized dihydrofurans based on 1,4-diazabicyclo[2.2.2]octane (DABCO) catalyzed reaction of halides with enones

Treatment of halides 5 with electrophilic alkenes 2 afforded the corresponding dihydrofurans 3 and 4 in the presence of 1, 4-diazabicyclo[2.2.2]octane (DABCO) with good to excellent yields and in a stereoselective manner in most cases. Moreover, the stereoisomers 3 and 4 could be easily transformed each other in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU).     

Characterization of the N-linked glycosylation site of recombinant pectate lyase

Recombinant pectate lyase from Aspergillus niger was overexpressed in Aspergillus nidulans. The two recombinant proteins produced differed in molecular mass by 1200 Da, which suggested that the larger molecular weight protein was glycosylated. The deduced amino acid sequence was searched for potential N-linked glycosylation sites, and one potential site was identified at residue 64. The proteins were analyzed for their ability to bind various lectins as an assay for the presence of carbohydrates. The proteins were then digested with trypsin to facilitate the isolation of the potential glycosylation site. The resulting digestion products were subsequently analyzed by liquid chromatography/mass spectrometry using in-source collision induced dissociation to detect glycopeptides. Once the glycopeptide had been identified, treatment with an endoglycosidase both verified the location of glycosylation and identified the mass of the glycan. The Complex Carbohydrate Structural Database was searched for possible N-linked structures with the same mass, and the suggested primary sequence was confirmed by an exoglycosidase digestion. The data demonstrated that the larger recombinant protein contained a high mannose N-linked structure (Man(5)GlcNAc(2)) attached to N-64, while this site was not occupied in the smaller protein.     

Long term stability of organic selenium species in aqueous solutions

Long term stability of organic selenium compounds (selenocystine, selenomethionine, trimethylselenonium ion) has been studied over a one year period for 2 analyte concentrations: 25 and 150 μg/L Se, at pH 4.5 in the dark, under different storage conditions: temperature of –20°C, 4°C, 20°C, 40°C; in Pyrex, Teflon, or polyethylene containers; in an aqueous matrix or in the presence of a chromatographic counter ion (pentyl sulfonate at 10^–4 mol/L concentration). Light effects have also been tested. The stability of the selenium species was monitored by HPLC-ICP/MS. Storage conditions can drastically alter the stability of organic selenium species. Organoselenium compounds were shown to be stable in the dark over a one year period in an aqueous matrix at pH 4.5 in Pyrex containers at both 4°C and 20°C. Pyrex vials exposed to natural sunlight at room temperature resulted in a steady decrease of the selenoamino acid concentration. Teflon containers caused losses of less than 25% at both 4° C and 20° C in the dark. However, polyethylene vials presented, at all temperatures tested, a rapid decrease of the TMSe⁺ concentration. The stability of the Se species studied did not show significant differences between 4° C and 20° C in any container material used. Storage of solutions at 40° C led to slight differences between the Pyrex and Teflon containers. However, polyethylene presented a drastic decrease of the three species over time at this higher temperature. Solutions frozen at –20° C in polyethylene vials did not stabilize the TMSe⁺ signal. Finally, concentrations and matrices of the samples did not significantly affect the stability of the species. Received: 15 July 1996 / Revised: 14 July 1997 / Accepted: 18 July 1997     

Catalyzed Asymmetric Arylation Reactions

Addition and substitution reactions with carbon nucleophiles are fundamental processes in organic synthesis, and the development of general catalytic asymmetric variants thereof is still a major challenge today. In contrast to enantioselective alkyl transfer reactions, the corresponding arylations have not yet reached a high level of maturity. The existing protocols are either of no general applicability or are limited in terms of selectivity. This article summarizes established routes for catalytic asymmetric aryl transfer together with the latest developments in this area. The scope and limitations of this reaction are discussed.     

Atomic Force Microscopy Study of TiO2 Films Obtained by the Sol-Gel Method

Atomic Force Microscopy (AFM) was used to study the influence of thermal treatments on the structural and textural properties of the sol-gel TiO2 films obtained from Ti(OC3H7i)4. X-ray diffraction (XRD), ellipsometric and porosity measurements have also been made.The TiO2 sol-gel films were homogeneous, transparent and amorphous. Heat treatments in the 400–600°C range indicate that the films have a strong tendency to crystallization. The high initial homogeneity of the TiO2 films was preserved during the crystallization process. AFM shows that the thermally treated films exhibit uniform, monodispersed crystals.     

Hydrophobic Molecular Similarity from MST Fractional Contributions to the Octanol/water Partition Coefficient

Summary The use of a recently proposed hydrophobic similarity index for the alignment of molecules and the prediction of their differences in biological activity is described. The hydrophobic similarity index exploits atomic contributions to the octanol/water transfer free energy, which are evaluated by means of the fractional partitioning scheme developed within the framework of the Miertus-Scrocco-Tomasi continuum model. Those contributions are used to define global and local measures of hydrophobic similarity. The suitability of this computational strategy is examined for two series of compounds (ACAT inhibitors and 5-HT₃ receptor agonists), which are aligned to maximize the global hydrophobic similarity using a Monte Carlo-simulated protocol. Indeed, the concept of local hydrophobic similarity is used to explore structure–activity relationships in a series of COX-2 inhibitors. Inspection of the 3D distribution of hydrophobic/hydrophilic contributions in the aligned molecules is valuable to identify regions of very similar hydrophobicity, which can define pharmacophoric recognition patterns. Moreover, low similar regions permit to identify structural elements that modulate the differences in activity between molecules. Finally, the quantitative relationships found between the pharmacological activity and the hydrophobic similarity index points out that not only the global hydrophobicity, but its 3D distribution, is important to gain insight into the activity of molecules. J.M.M. and S.P. have contributed equally to this study.     

Multinuclear NMR studies and ab initio structure calculations of hindered phencyclone diels‐alder adducts from symmetrical cyclic dienophiles: Cyclohexene,vinylene carbonate,vinylene trithiocarbonate and two N‐aryl maleimides

A series of hindered Diels‐Alder adducts have been prepared from phencyclone, 1 , with various unusual symmetrical cyclic dienophiles, including cyclohexene, 2a ; vinylene carbonate, 2b ; vinylene trithiocarbonate, 2c ; and the N‐aryl maleimides: N‐(4‐dimethylamino‐3,5‐dinitrophenyl)maleimide (“Tuppy's maleimide”), 2d ; and N‐[3,5‐bis(trifluoromethyl)phenyl]maleimide, 2e . The highly hindered adducts, 3a‐e , respectively, were extensively characterized by one‐ and two‐dimensional NMR methods, observing proton, carbon‐13 and fluorine‐19. High resolution COSY45 spectra permitted rigorous proton NMR assignments. The 2D heteronuclear C‐H chemical shift correlation spectra (HETCOR, XHCORR) were obtained for adducts 3a‐d , allowing specific assignments for protonated carbons. Corrections to earlier proton NMR assignments for the vinylene carbonate adduct are given; results of the gated decoupling ¹³C NMR experiment for this adduct supported endo adduct stereochemistry. Relative proton chemical shifts for bridgehead phenyls of adduct 3c appeared anomalous relative to other adducts, suggesting possible special anisotropic interactions (with endocyclic sulfur or other anisotropic groups in the product) due to the unusual calculated orientation of the phenyls. The unsubstituted bridgehead phenyls in all adducts were shown to exhibit slow exchange limit (SEL) ¹H and ¹³C spectra on the NMR timescales at ambient temperatures (7 tesla) showing slow rotations about the C(sp³)‐C(aryl sp²) bonds. The rapid rotation of the N‐aryl rings of the maleimide adducts was indicated by fast exchange limit spectra, suggesting that ortho substitution of the N‐aryl ring may be necessary to slow this rotation to the SEL regime. Ab initio geometry optimizations at the Hartree‐Fock level were carried out for each adduct, with the 6‐31G* basis sets. Appreciable geometry differences were seen in calculated structures, and significant NMR chemical shift differences were experimentally observed, depending on the nature of the groups attached to the (Z)‐HC=CH moiety of the dienophiles.     

ELECTROCHEMICAL POLYMERIZATION OF ANILINE IN PHOSPHORIC ACID AND THE PROPERTIES OF POLYANILINE

The behavior of the electrochemical polymerization of aniline in a weak acid, phosphoric acid, is very similar to that in strong acids, i.e. its polymerization rate increases quickly with the electrolysis time. The FTIR spectra of polyaniline samples synthesized in phosphoric acid indicate that the counter ion H2PO4^- is present in both the oxidized form and the reduced form of polyaniline. The counter ion plays an important role in adjusting the pH value at the electrode surface of polyaniline during the oxidation and reduction processes. As a result, a pair of redox peaks still appear in cyclic voltammograms of polyaniline in a solution of sodium sulfate of pH 5.5 and in a solution of NaH2PO4 of pH 7.0,respectively, at low potential scan rate; and the color of polyaniline film also changes with applied potential at pH 7.0. Thus,the pH region for the electrochemical activity and the electrochromism of polyaniline is extended to pH 5.5 for a solution of sodium sulfate and to pH 7.0 for a solution of NaH2PO4. The conductivity of polyaniline is 3.3 S cm^-1, depending on the concentration of phosphoric acid used in the stage of polymerization of aniline. The result of elemental analysis of polyaniline is presented here.     

掺杂阴离子对电化学合成的聚邻甲苯胺性质的影响

邻甲苯胺在酸性介质中的聚合速率与酸的种类有关,聚合速率影响了各种掺杂阴离子聚合物膜的形态,聚合物的电导率、循环伏安曲线形状受掺杂阴离子的影响,其电容量与掺杂阴离子的种类及形态有关,阴离子的种类对电极电位和紫外-可见光谱无影响。     

Photochemically induced fluorescence investigation of aβ-cyclodextrin: Azure A inclusion complex and determination of analytical parameters

The photooxidation of Azure A and fluorescence properties of Azure A and its photoproduct have been investigated in aqueous media and in the presence of-cyclodextrin (-CD). The fluorescence intensity of the complex formed between the photoproduct and -CD was found to be three times higher than that of the uncomplexed Azure A photoproduct. A complex formation constant of 110±40 M^–1 was calculated using the Benesi-Hildebrand treatment of the fluorescence emission data. Although the stoichiometry of the Azure A photoproduct: -CD complex was found to be 1: 1, it seems that the Azure A structure is only partially included. Calibration graphs were plotted for the free Azure A photoproduct and the photogenerated product included in -CD. The analytical parameters and quantification limits were determined.