Pure-silica optical waveguides, fiber couplers, and high-aspect ratio submicrometer channels for electrokinetic separation devices

A new fabrication procedure for integration of ultraviolet transparent pure-silica planar waveguides, fiber couplers and high-aspect ratio submicrometer channels is presented. Only a single photolithographic mask step is required. The channels are 80-90 microm deep and the width can be reduced to about 0.5 microm, corresponding to a height-to-width ratio of more than 150. The core of the waveguides consists of pure silicon dioxide, which is favorable over doped silica, due to the absence of absorption centers associated with the dopants. This furthermore improves the long-term stability of the waveguides, because of an increased radiation resistance of the glass. The propagation loss decreases from 1.0 dB/cm at 200 nm to 0.2 dB/cm at 800 nm, which, to our knowledge, is the lowest propagation loss reported for integrated planar waveguides in the ultraviolet wavelength region to date. The effective optical path length is 1.2 mm for an absorbance cell with a nominal length of 1.0 mm, indicating effective suppression of stray light. The limit of detection for paracetamol when present in the entire channel network was determined to 3 microg/mL. Finally, the applicability of the fabricated devices for capillary electrophoresis was evaluated by separation of caffein, paracetamol and ketoprofone using absorbance detection at 254 nm.     

A ONE-STEP SURFACE MODIFICATION PROCEDURE TO PEG-GRAFTED NANO-TITANIA

PEG （Polyethylene Glycol）-grafted nano-titania has been obtained in a one-step procedure using hexamethylene diisocyanate as the coupling agent and dibutyltin dilaurate as the catalyst in toluene at 80℃ and characterized qualitatively by FTIR and quantitatively by elemental analysis and thermogravimetric analysis. A comparison of nano-titania with two other commonly used inorganic nanoparticles, nano-silica and nano-alumina, is made, revealing that reactivity order is nano- silica 〉 nano-alumina 〉 nano-titania in view of PEG grafting. Possible mechanism of PEG grafting is also discussed.     

1-苯基-3-甲基-4-苯甲酰基-5-吡唑酮与甲基膦酸二(1-甲基庚基)酯对Pb(Ⅱ)、Cd(Ⅱ)和Cu(Ⅱ)的萃取机理研究

本文用两相滴定法研究了1-苯基-3-甲基-4-苯甲酰基-5-吡唑酮(PMBP,简写为HA)与甲基膦酸二(1-甲基庚基)脂(P_(350),简写为B)对Pb~(2+)、Cd_(2+)和Cu~(2+)离子在不同的有机溶剂中的萃取机理.(?)定了萃合物的组成分别为:MA_2(M=Pb~(2+)、Ca~(2+)、Cu~(2+));MA_2·HA(M=Cd~(2+));MA_2·B(M=Pb~(2+)、Cd~(2+))和MA_2·2B(M=Cd~(2+)),同时求得了相应的萃合常数β值.     

姜黄素类似物的合成及其清除自由基的研究

姜黄素(见图1)为中药姜黄的主要成分,是一种黄色色素。研究报道姜黄素具有抗氧化、抗炎、抗病毒、抗癌等生物活性[1-4]。本文通过芳香醛和环己酮催化缩合反应合成了一系列姜黄素类似物(见图2),研究了它们抗自由基的活性。图1姜黄素的化学结构F ig.1 Chem ical structure of cur     

一种新颖一维铅碘聚合物[(Pb_2I_5)(L-H~ )·2DMF]_n(L=Piperazine)的自组装合成和晶体结构(英文)

0IntroductionIncreasinginterestisfocusedonthestudyofmagnetic,electronicandoptoelectronicpropertiesoflow鄄dimensionalorganic鄄inorganichybridcompoun鄄ds[1~3].Studiesshowthatcomplexconsistingoforganicandinorganiccomponentshavegreatpotentialforthecreationoff…     

高聚物固体电解质聚氧化乙烯－溴化铜复阻抗谱及介电常数的静水压效应

采用分子量５００万的聚氧化乙烯和无水溴化铜，通过混溶蒸发法制备成高聚物固体电解质Ｐ（ＥＯ）ｎ－ＣｕＢｒ２薄膜，并在０．１～３００ＭＰａ范围不同的流体静水压下详细测量其复平面阻抗谱，分别得到在不同压力下离子电导率和介电常数与测量频率的关系．进一步解谱准确地求出Ｐ（ＥＯ）ｎ－ＣｕＢｒ２（ｎ＝１２、１６）薄膜离子电导率和介电常数的静水压效应，并结合Ｘ－光物相分析，根据离子迁移通道的物理图象和高聚物的极化机构进行了初步的讨论．添加２０％的增塑剂碳酸丙烯酯，较大改进了压力下的导电性．１２０～３００ＭＰａ的离子电导率提高一个数量级     

对环氧化反应具有高催化活性的钛硅介孔分子筛的制备

 使用短链二元羧酸（包括草酸、戊二酸、柠檬酸和酒石酸）为模板剂，采用溶胶－凝胶法合成了具有大比表面积，孔径在3～7nm的钛硅介孔分子筛．EDX和紫外可见漫反射光谱的研究结果表明，所合成的钛硅介孔分子筛中钛的分布均匀，钛物种以孤立态四面体构型为主．本方法所合成的钛硅介孔分子筛对环己烯环氧化反应具有很高的催化活性和选择性．     

羧酸直接酰胺化的一个新方法

N, N-二甲基取代酰胺可以方便地由脂肪族或芳香羧酸与四(二甲氨基)硅烷在无水溶剂中反应制得。     

聚（3—丁基噻吩）电导的热稳定性

研究了导电聚合物聚（３－丁基噻吩）（ＰＢＴ）在大气环境下的导电热稳定性。在室温至２２０℃范围内，测试电导率随时间及温度的变化。ＴＧＡ分析以及化学分析的结果表明：掺杂态的ＰＢＴ大约在１４０℃附近有一转化温度，低于或高于这一转化温度，电导率下降的决定因素各不相同。高于转化温度时，电导率下降的主要原因是反离子和高分子主链的解离，进而发生化学反应，影响了高分子主链的结构。ＸＰＳ测试结果表明：经热处理后的Ｐ