Stereoselective synthesis of (R)-(−)-denopamine, (R)-(−)-tembamide and (R)-(−)-aegeline via asymmetric reduction of azidoketones by Daucus carota in aqueous medium

A simple and efficient stereoselective synthesis of (R)-denopamine and other naturally occurring hydroxy amides from optically active (R)-2-azido-1-arylethanols, is described for the first time via reduction of the corresponding -azidoarylketones with enzymes from Daucus Carota root, under mild and environmentally friendly conditions. The products are formed with high degrees of enantioselectivity.     

Organocatalytic Formal Intramolecular [3+2]-Cycloaddition to Acquire Biologically Important Methanodibenzo[a,f]azulenes and Methanobenzo[f]azulenes

Lawsones were transformed into the functionally rich framework of methanodibenzo[a,f]azulenes and methanobenzo[f]azulenes in a single- or two-pot operation through five organocatalytic sequential reactions in very good yields with excellent selectivities. These resultant molecules are basic skeletons of important antibiotics, which highlights the value of this formal intramolecular [3+2]-cycloaddition as a key protocol.     

Development and validation of a generic RP‐HPLC PDA method for the simultaneous separation and quantification of active ingredients in cold and cough medicines

A novel generic reverse phase high performance liquid chromatography (RP‐HPLC) method is developed and validated for simultaneous determination of seven pharmaceutically active ingredients, namely, acetaminophen, dextromethorphan, doxylamine, phenylephrine, guaifenesin, caffeine and aspirin. All seven ingredients were quantified in soft gel, syrup and tablet formulations of the over‐the‐counter US‐marketed products, as per the guidelines of the International Conference on Harmonization. The separation was achieved in a 16 min run time on an Agilent Zorbax Phenyl column using a gradient method with two mobile phases. Mobile phase A was 0.15% trifluoro acetic acid in purified water and while mobile phase B was a mixture of acetonitrile and methanol (750:250 v/v) with 0.02% trifluoro acetic acid. The flow rate was 1.0 mL min^?1 and injection volume was 10 μL. Detection was performed at 280 nm using a photodiode array detector. As part of the method validation, specificity, linearity, precision and recovery parameters were verified. The concentration and area relationships were linear (R² > 0.999), over the concentration ranges 20–120 μg mL^?1 for acetaminophen, 75–450 μg mL^?1 for dextromethorphan, 31.25–187.5 μg mL^?1 for doxylamine, 25–150 μg mL^?1 for phenylephrine, 25–150 μg mL^?1 for aspirin, 6.5–39 μg mL^?1 for caffeine and 12–72 μg mL^?1 for guaifenesin. The relative standard deviations for precision and intermediate precision were <1.5%. The proposed RP‐HPLC generic method is applicable for routine analysis of cold and cough over‐the‐counter products.     

A novel RP-HPLC refractive index detector method development and validation for determination of trace-level alcohols (un-sulfated) in sodium lauryl sulfate raw material

The main aim of the study is to develop and validate a simple and rapid liquid chromatographic analytical method for simultaneous determination of trace level of un-sulfated alcohol impurities in sodium lauryl sulfate using high-performance liquid chromatography with a refractive index detector. The chromatographic separation was achieved using flow rate of 3.0 ml/min with a Waters Symmetry C₁₈ (150 × 4.6 mm, 5 μm) column and 50°C as a column temperature. The mobile phase comprised milliQ water and acetonitrile in the ratio of 30:70 v/v respectively. The detection was performed using a refractive index detector at a sensitivity of 64. The resolutions among n-decanol, n-dodecanol, n-tetradecanol, n-hexadecanol, and n-heptadecanol were found to be >4. Regression analysis showed a correlation coefficient for the stated compounds of >0.999. The validated HPLC method was utilized effectively for the estimation of un-sulfated alcohols in quality control labs for commercial release of sodium lauryl sulfate.     

A tandem synthesis of 3-aroylcoumarinoflavones catalyzed by <Emphasis Type="SmallCaps">l</Emphasis>-proline and their antioxidant activity

A facile, convenient, efficient and high-yielding synthesis of 3-aroylcoumarinoflavones has been developed by the condensation of easily synthesized 7-hydroxy-8-formylflavones and benzoyl acetonitriles in the presence of catalytic amount of l-proline in ethanol reflux. All the synthesized compounds were evaluated for their antioxidant activity. Some of the compounds showed very good activity compared to standard BHT.     

Sulfated Zirconia: An Efficient Catalyst for Solvent-Free Synthesis of Silyl Ethers Under Mild Conditions

Oximes, allylic, aliphatic, aromatic, cyclic, acyclic, and hetero alcohols are silylated in short reaction times with good yields in the midst of a catalytic amount of sulfated zirconia solid acid catalyst and trimethylsilyl cyanide under nonbasic, solvent-free, and ambient temperature conditions. Selectivity toward O-silyl ether rather than N-silyl ether has been observed. This simple experimental procedure, combined with easy recovery and reusability of the catalyst, is expected to contribute to the development of a clean and environmentally friendly strategy for the synthesis of O-silyl ethers.     

Cellulose Sulfuric Acid: An Efficient Biodegradable and Recyclable Solid Acid Catalyst for the Synthesis of 1-Oxo-hexahydroxanthene

A series of 1-oxo-hexahydroxanthene derivatives was synthesized at room temperature in solid state from substituted salicylaldehydes and substituted 1,3-hexanediones in the presence of a catalytic amount of cellulose sulfuric acid. The results showed that the reaction performed under solid-state conditions was benign to the environment, with higher yields and more convenient workup.

CuPy2Cl2: A Novel and Efficient Catalyst for Synthesis of Propargylamines Under the Conventional Method and Microwave Irradiation

CuPy₂Cl₂ is an efficient catalyst for the preparation of propargylamines via three-component coupling reaction of aromatic aldehydes, amines, and aromatic alkynes stirred at 95 °C without using any solvent to afford the corresponding products in good yields. The reaction mixture was irradiated at 450 W in a microwave oven to furnish the expected products in excellent yields.     

Comparisons of phosphorus ligation properties in P(CH2NR)3P

Bicyclic P(CH2NMe)3P was synthesized, and its reactions with MnO2, elemental sulfur, p-toluenesulfonyl azide, BH3.THF, and W(CO)5(THF) were shown to furnish a variety of products in which the PC3 and/or the PN3 phosphorus are oxidized/coordinated. In contrast, reactions of the previously known P(CH2NPh)3P with Mo(0) and Ru(II) precursors were shown to afford products in which only the PC3 phosphorus is coordinated. The contrast in reactivity of P(CH2NR)3P (R = Me, Ph) with the aforementioned reagents is discussed in terms of steric and electronic factors. The new compounds are characterized by analytical and spectroscopic (IR, 1H, 31P, and 13C NMR) methods. The results of crystal and molecular structure X-ray analyses of the previously known compounds P(CH2O)3P and P(CH2NPh)3P and 6 of the 14 new compounds obtained in this investigation are presented. Salient features of these structures and the analysis of the Tolman cone angles calculated from their structural parameters are discussed in terms of the effects of constraint in the bicyclic moieties. Evidence is presented for greater M-P sigma bonding effects on coordination of the PC3 phosphorus of P(CH2NR)3P (R = Me, Ph) than are present in PMe3 analogues of group 6B metal carbonyls. From 1JBP data on the BH3 adducts of P(CH2NMe)3P, it is suggested that the free bases MeC(CH2NMe)3P < P(CH2NMe)3P < (Me2N)3P < P(MeNCH2CH2)3N increase in Lewis basicity at the PN3 phosphorus in the order shown. Substantial differences in 31P chemical shifts in the bicyclic compounds discussed herein relative to their acyclic analogues do not seem to be associated with the relatively small bond angle changes that occur around either the PN3 or the PC3 trivalent phosphorus atoms.     

Numerical Modeling of Thin Film Deposition in Expanding Thermal Plasma

Expanding thermal plasma (ETP) is a widely used technique for deposition of a thin layer of ceramic materials and metal oxide on a substrate for a wide range of applications including abrasion resistance, UV absorption, as well as conductive and optical coatings. The coating quality is found to be dependent on operating parameters as well as reactor designs. In this article, we have presented a CFD based model of the ETP process to simulate the deposition of silica-like coatings on a polycarbonate substrate. Along with the flow-thermal model of plasma jet expansion process, the study also reports the development of a simplified gas phase and surface reaction model to simulate the coating phenomena. The model has been used further to study the effect of various operating conditions on the coating thickness, viz. reactor pressure, reagent flow rate, distance of the substrate from the arc and substrate alignment.